PDUs $168
★★★★★ 5/5 15 ratings The TRIPP LITE PDUV20 is a basic, non-switch rackmount power distribution unit for 120V environments that need 14 outlets in a space-efficient 0U vertical format. It is built for server racks, offers multiple mounting orientations, and uses a 20A-rated L5-20P input with 5-15/20R outputs plus a resettable circuit breaker. The main buying caveat is fit, it only makes sense if your rack and power feed match the L5-20 input and you can support the agency de-rated continuous current.
PDUs $316
★★★★★ 4.2/5 7 ratings The Mopar Genuine Power Distribution Center (68305537AB) is an OEM-style power accessory intended to replace or complete an automotive power setup. Buyer feedback is limited but points to authentic fit and straightforward functionality when you need the correct Mopar part.
PDUs $179
★★★★★ 4/5 12 ratings A rack-mountable, metered PDU with surge protection and breaker support designed for 240V L6-30P setups. It gives you 6 C13 and 2 C19 outlets for flexible power distribution, especially for data center, mining, and ASIC/RIG workloads. The main caveat is that multiple buyers reported issues with the ground indicator, so it is important to verify safe installation and behavior before trusting it for unattended runs.
PDUs $640
★★★★★ 5/5 3 ratings The CyberPower PDU41004 is a 1U, rackmount switched PDU designed for remote power control and monitoring. With eight front switchable IEC C13 outlets, an RJ45 Ethernet connection, and a power control display, it fits server rooms and IT closets that need rebooting, sequencing, or load management. The main buying caveat is capacity planning: it’s rated for 15A input but is derated to 12A, so you need to confirm your total equipment load.
PDUs $213
★★★★★ 4/5 8 ratings The CyberPower MBP15A6 is a 1U, rackmount maintenance bypass PDU built for scenarios where you need to move connected equipment between UPS power and utility power. It offers six rear NEMA 5-15R outlets, a manual bypass switch, and a rugged metal housing, with the main caveat being its derated electrical capacity (15A listed, derated to 12A).
PDUs $752
★★★★★ 2.4/5 2 ratings A vertical, rack-mount switched PDU designed for network and IT environments that need per-outlet control plus remote monitoring. The LX Platform interface supports secure web access and multiple network protocols, but buyer-review evidence is limited (only two ratings), so fit depends heavily on your monitoring and rack orientation needs.
PDUs $21.83
★★★★★ 4/5 62 ratings This outdoor-rated 2-way distribution box is designed for compact power protection in sheds, garages, and similar locations, with an IP65 case and a dual MCB setup that can be configured around 6A/16A/20A with a 32A rating. It can be a good fit when you need a small, wall-mountable distribution enclosure, but wiring layout and compatibility are crucial, especially for neutral and ground routing.
PDUs $93.78
★★★★★ 3.6/5 14 ratings A wall-mounted power distribution box designed to run lights and small loads from a Mil.Waukee 18V battery, with three individually switched output lines, dual 5V USB charging, and adjustable low-voltage cut-off. Best for DIY lighting and utility setups, but buyer-fit depends heavily on whether you actually need 18V power and whether the low-voltage settings are compatible with how you intend to use it.
PDUs $79.99
★★★★★ 4.2/5 16 ratings The EVERSECU 18-channel 12V regulated UPS is designed for security setups like CCTV, burglar alarms, and access control, using auto-switchover to a separate 12V SLA/AGM battery (battery not included). It offers 18 independent outputs (PTC-protected per channel) and a metal, lockable enclosure, but it can run its cooling fan frequently under heavier loads.
PDUs $155
★★★★★ 4.8/5 8 ratings A compact 0U switched mini PDU with two individually controlled NEMA 5-15R outlets and a built-in LX Platform interface for remote, always-on power control. Best for small network racks or closets where you want the ability to remotely reboot or shut down one or two devices, with the main caveat that this is a limited-outlet setup designed for single-phase 100/120/127V environments.
PDUs $120
★★★★★ 4.8/5 10 ratings The RVMARINEPAT 600A bus bar kit is built for high-current DC power distribution in 12V, 24V, and 48V systems. With a thick nickel-plated copper core, six M10 studs per bus bar, and a protective cover, it’s a practical way to keep large battery and inverter wiring organized, solid, and less cluttered.
PDUs $381
★★★★★ 5/5 3 ratings A rackmount metered PDU with an automatic transfer switch (ATS) designed for 120V, single-phase setups where you want redundancy plus real-time load monitoring. It’s built around fast primary-to-secondary switching (2 to 7 ms) and a digital load meter, with the main practical tradeoff being limited outlet placement (front-facing outlets) for cable management.
PDUs $209
★★★★★ 5/5 5 ratings The Voswitch JL500 is a Jeep JL/JT power distribution switch panel designed to look factory, mount into the headlamp bezel area, and run multiple fused circuits with a weather-resistant power module. It is a strong fit for Wrangler JL (2018+) and Gladiator JT (2020+) owners who want a cleaner, plug-and-play approach, with the biggest caveat being strict compatibility and required bezel plug coverage.
PDUs $59.99
★★★★★ 4.4/5 16 ratings The EVERSECU 9-channel AC 24V power distribution box is designed for CCTV and similar security loads, with independent resettable PTC fuses per output and multiple protection modes. It is a solid fit if you want centralized power management, reliable circuit isolation, and a fanless design, but buyers should double-check real-world output voltage expectations before powering sensitive cameras.
PDUs $38.28
★★★★★ 4.3/5 21 ratings The MEAN WELL MDR-100-24 is a 24V DC DIN-rail switching power supply built for panel and control projects, with built-in protections (short-circuit, overload, overvoltage, and over-temperature) and a universal AC input range. It’s best for buyers who need a compact 4A, 24V output and straightforward reliability in a DIN-rail enclosure, with the main caveat being that at least one buyer reported high-pitched noise.
PDUs $13.99
★★★★★ 4.7/5 52 ratings A compact 2 in 8 out terminal block module built for DIN rail and panel mounting work in PLC and servo power wiring. It supports 25A and up to 300V, uses screw terminals for fast wire connections, and fits common 35mm (C45) DIN rails, but it may feel loose on some rails.
PDUs $39.14
★★★★★ 3.7/5 17 ratings The W Box Technologies 4CPW5A60W is a compact 12V DC CCTV power distribution unit designed to feed up to four channels with up to 60W total output. It supports universal 100 to 240VAC input, includes adjustable output voltage for longer cable runs, and offers PTC-style output protection. Buyer feedback is mixed, with some units reported working for years and others failing after a couple of years or even just a few months.
PDUs $45.99
★★★★★ 4.4/5 14 ratings The RVMARINEPAT 400A DC bus bar kit is built for high-current RV, marine, and off-grid power distribution, using a thick nickel-plated copper core and an insulated, cover-protected housing. It’s a practical “hub” solution for organizing positive and ground connections, but buyers should double-check lug sizing and stud thread fit before ordering.
PDUs $152
★★★★★ 4.7/5 4 ratings A 24V DC, 20A (480W) three-phase industrial DIN rail power supply designed for panel installs that need high output power. It accepts a wide 340 to 550VAC input range and uses natural air cooling, with a DIN rail form factor for electrical cabinets. Buying caveat: it is built for specific three-phase input systems, so confirm compatibility before ordering.
PDUs $17.98
★★★★★ 4.7/5 32 ratings The Inchoco 12v power distribution block is a compact way to tidy and consolidate high-current battery wiring for cars, boats, RVs, and solar setups. It uses a nickel-plated bus bar with a flame-retardant nylon base and removable protective cover for safer, cleaner connections, though some buyers report missing certain hardware like mounting screws and additional nuts.
PDUs $45.99
★★★★★ 4.4/5 12 ratings A lockable metal 9-channel 12V DC power distribution box built for CCTV setups that need centralized powering of multiple cameras and DVRs. It includes resettable fuses per channel for overload and short-circuit protection, plus an enclosed design that helps deter tampering. The main tradeoff is that it requires careful wiring and matching your camera power needs to the box’s 12V, 10A total output.
PDUs $35.00
★★★★★ 4.9/5 13 ratings A 12-channel DIN-rail DC power distribution module that lets you switch multiple low-voltage circuits independently, with per-channel rocker switches and power-on LED indication. Best for lab setups, automation prototypes, and off-grid style DC distribution, as long as your total load stays within the module’s 0 to 50V and 30A total limits.
PDUs $25.00
★★★★★ 4.7/5 16 ratings A DIN-rail mounted DC power distribution strip with 6 individually switched outputs and per-channel ON/OFF LED indication. Built for wiring projects that need tidy terminations, clear control, and expansion options, with key limitations around DC range and total current capacity.
PDUs $33.99
★★★★★ 4.2/5 10 ratings This 18-port 12V DC power distribution box is designed to simplify wiring for security cameras and DVR setups, with per-port fuses and visual indicators to help isolate a failed channel. It can support up to 18 paired outputs, but it requires you to provide your own AC power cord and be mindful of cooling noise and potential reliability tradeoffs.
PDUs $112
★★★★★ 3.8/5 3 ratings The ONTISIV WF-8930 is a compact RV AC/DC power distribution center designed for 30/50 amp, 120V/240V setups, offering 15 DC circuits and up to 12 AC branch circuits. It can be a straightforward retrofit option, but buyer caution is warranted because multiple reviews call out a lack of visible U.S. electrical or fire-safety compliance markings and no included instructions, plus no DC fuses or AC breakers come with the panel.