CCTV Power Supply Box 9 Channel 12V 10A, Lockable Metal Power Distribution with Resettable Fuse for Security Cameras DVRs
Quick take
This 9-channel CCTV power distribution box delivers centralized DC 12V power for up to nine security cameras or DVR-related devices, with a total output of 10A. It uses an enclosed, lockable steel housing and includes auto-reset fuses per channel for overload and short-circuit protection. The key caveat is that you still need to handle DC wiring and ensure your cameras’ voltage and current draw fit the box’s 12V, 10A capacity.
Pros and cons
Pros
- 9 separate DC output channels for centralized powering of multiple cameras/DVR devices at 12V.
- Up to 10A total output, with channel-level protection via auto-reset fuses.
- Lockable metal enclosure, helpful when the box will be accessible outside a locked control cabinet.
- Designed for simple AC input powering with a plug-and-play style setup.
Cons
- Not a true plug-and-play solution for every system, because channel wiring and correct DC polarity are required.
- Capacity is limited to 10A total, so higher-draw cameras may require careful channel planning.
- Ripple and operating specs are provided, but buyer-review evidence is limited, so performance patterns can be hard to confirm.
What buyers think
Buyer-review evidence is limited, but the available feedback points to one clear theme: many users find the box to be a practical, solid way to power multiple cameras in a centralized setup. Several reviews are brief and confirm basic operation, while at least one negative review is present, though details are too sparse to identify a recurring technical problem. Overall, the evidence supports the idea that this is a straightforward power-distribution device that works well when installation wiring and power matching are done correctly.
What this power supply box does (and who it’s for)
This is a CCTV-focused power distribution unit that takes AC input and distributes DC 12V power across nine channels. In real installations, that typically means fewer individual adapters and a cleaner “one box to feed the system” layout, especially for DVR-based or multi-camera surveillance.
Best for:
- Installers or DIYers who want a centralized 12V power hub for multiple cameras.
- Install locations where a lockable, enclosed metal housing is preferable to exposed adapters.
- Systems where each camera can run from a shared 12V rail and you can wire outputs to the right channels.
Who should avoid it:
- Buyers with cameras that do not run on 12V DC (or have materially different voltage requirements).
- Anyone who needs a fully turnkey adapter-style solution without doing any wiring work.
- Installations where total camera load is likely to exceed the box’s 10A ceiling, unless you redesign the channel plan or use an alternative power strategy.
Key features that matter in a CCTV installation
9-channel centralized DC output
The unit provides nine positive and negative output terminals, organized as nine channels. This helps you distribute power across multiple cameras or camera-related devices while keeping connections tidy and easier to manage later.
Total power capacity: 12V at 10A
The box is rated for DC 12V with a total current output of 10A (about 120W output). It also specifies that each channel supports up to 1.6A. In practice, that means your camera lineup needs to be sized so the combined current draw stays within the total 10A budget.
Resettable fuse protection per channel
Each channel includes an auto-reset fuse intended to protect against overload and short-circuit conditions. Compared to one-time fuses, this approach can reduce downtime after a fault is cleared, but it is still not a substitute for correct wiring and appropriate camera power matching.
Lockable metal case for better physical security
The steel enclosure is lockable (keys included) and designed to help prevent unauthorized access and protect the power distribution hardware. This is a practical benefit for commercial spaces or any installation where the box may be accessible.
Installation and compatibility considerations
This device is meant to be powered from AC input (110V AC, 47 to 63 Hz). It is also specified as using a NEMA 5-15P connector type on the AC side (the included AC input plug connects to a compatible outlet).
On the DC side, the installation depends on your camera cabling and how you plan to connect each camera to a channel. Reviews mention wiring, including the need to adapt existing power ends to the box, so expect some electrical work rather than a purely adapter-based swap.
Pros and cons summary for quick decision-making
- Choose it if you want an enclosed, lockable 12V distribution box for up to nine cameras, and you can plan your wiring and total current draw around the 10A rating.
- Skip it if your camera system does not use 12V DC or if you need a no-wiring solution.
Price and availability
Pricing can fluctuate on the marketplace, so it’s best to check the latest listing details before ordering. Availability is shown as in stock in the current listing data.
FAQ
How many cameras can this power supply box run?
It is designed for nine channels of centralized DC 12V output, so it’s intended to power up to nine compatible CCTV cameras or DVR-related devices, assuming the total system current stays within the unit’s 12V, 10A capacity.
Is this a 12V power supply, or does it support multiple voltages?
It outputs DC 12V. If your cameras require a different voltage, you will need a different power approach.
What does “resettable fuse” mean on each channel?
Each channel includes an auto-reset fuse intended to protect against overload and short-circuit conditions. When a fault is cleared, power is expected to return without replacing a fuse.
Do I need to wire the cameras to the channels?
Yes. While the unit uses an AC input plug, the DC side provides channel terminals, so you will need to connect each camera power feed to the correct channel using appropriate wiring and correct polarity.
What should I check before buying?
Confirm that your cameras run on 12V DC, then check that the combined current draw of all cameras you plan to power stays within the unit’s total 10A rating (and that individual channel loads do not exceed the channel’s current limit).
What is the benefit of a lockable metal enclosure?
The metal case with a lock helps protect the power distribution components and can reduce tampering in installations where the box might be accessible.
Specifications
| Product Title | CCTV Power Supply Box 9 Channel 12V 10A, Lockable Metal Power Distribution with Resettable Fuse for Security Cameras DVRs |
|---|---|
| Category | Electronics > Power Accessories > PDUs |
| Brand | guanghuifeng |
| Manufacturer | guanghuifeng |
| Compatible Devices | Security Camera, DVR |
| Connector Type Used on Cable | NEMA 5-15P |
| Output Wattage | 120 Watts |
| Form Factor | Enclosed |
| Wattage | 120 watts |
| Cooling Method | Air |
| Current Rating | 10 Amps |
| Maximum Input Voltage | 125 Volts (AC) |
| Item Dimensions | 9 x 7.8 x 1.8 inches |
| UPC | 716841010541 |
| Mfr Part Number | power-1 |
| Unit Count | 1.0 Count |
| Connector Type | NEMA 5-15P |
| Item dimensions L x W x H | 9 x 7.8 x 1.8 inches |
Available variants
Color
- 18 Channel/(12V/10A)
- 9 Channel/(12V/5A)
- 18 Channel/(12V-20A）
- 18 Channel/(12V/30A）
- 9 Channel/(12V/10A)
Recommended next
CyberPower CPS1215RMS Surge Protector, 120V/15A, 12 Outlets, 15 ft Power Cord, 1U Rackmount
The CyberPower CPS1215RMS is a 1U rackmount surge protector with 12 NEMA 5-15R outlets (front and rear) and a 15 ft power cord, built for network racks, data closets, and home office setups that need flexible plug access. It’s commonly chosen for its solid metal housing, low-profile rack fit, and practical outlet layout, with the main tradeoff being that it’s not a smart PDU and surge performance cannot be “proven” after installation.
CyberPower PDU41001 Switched PDU, 100-120V/15A (Derated to 12A), 8 Outlets, 1U Rackmount
The CyberPower PDU41001 is a 1U, rackmount switched PDU that adds network control (local and remote) for 8 NEMA 5-15R outlets plus an LCD for at-a-glance electrical readings. It’s designed for people who want to power-cycle devices from anywhere and monitor PDU vitals, with the main tradeoff being an input current limit that’s derated to 12A in practice.
EVERSECU 18 Channel DC12V 10 Amp Reset Fuse CCTV DC Distributed Power Box with AC Plug and Lock
The EVERSECU 18-channel DC12V PTC-fused power box is designed for running multiple security cameras from a single AC input. Each output has its own resettable fuse and LED status, with short and over-current protection to limit what goes down if one channel has an issue. It is a strong fit for multi-camera analog or IP projects that want centralized, per-channel protection, with the tradeoff that there are no individual output switches.
Evemodel PCB012 Power Distribution Board Self-Adapt Distributor HO N O LED Street Light Hub DC AC Voltage Train Power Control
The Evemodel PCB012 is a compact power distribution hub designed for powering multiple LED lights on HO, N, and O gauge layouts. It supports DC or AC input (4V to 24V), includes output voltage control options, and offers dimmer-style brightness adjustment. Best for modelers who want one distribution board for up to 28 light outputs, as long as all connected lights share compatible voltage and current requirements.