EVERSECU 18 Channel DC12V 10 Amp Reset Fuse CCTV DC Distributed Power Box with AC Plug and Lock
Quick take
This EVERSECU 18-channel DC12V power distribution box is built to run many security devices from one 100-240VAC input while giving you per-output protection via resettable PTC fuses and LED indicators. It is a practical choice for multi-camera installations that value channel-level fault isolation, but it does not include individual output switches, so you may need to plan how you control power per camera.
Pros and cons
Pros
- 18 independent outputs for centralized DC12V distribution to cameras and related devices.
- Resettable PTC fuse per output with an LED indicator, so one channel issue does not necessarily take down the entire box.
- Protection features include short-circuit protection, high-voltage (surge) protection, and over-current self-protection behavior.
- Lockable, metal housing intended for safer installation in real-world security setups.
Cons
- No separate on/off switches per output, which some installers may want for troubleshooting or staged startup.
- Channel current is capped (PTC fuse rating is 1.1A per channel), so you need to confirm each camera or accessory stays within limits.
What buyers think
Buyer-review evidence is limited but points to a consistent theme: the unit is straightforward to install and has been used successfully as a replacement or for multi-camera powering. Reviews commonly mention that it provides solid value when you need to power multiple cameras from one centralized box, and that it appears to work reliably over the first several months for typical setups. A recurring practical note is that there are no individual switches per output, so some buyers plan around that using external inline controls.
Who this power box is for
- Multi-camera security projects (analog, PTZ, IR illuminators, video processors, and similar devices that run on DC12V).
- Installers and DIY builders who prefer centralized power distribution with per-channel fault isolation.
- Anyone replacing an older CCTV power supply where you want more outputs and resettable protection behavior.
Key specs that matter for real installs
- Input: AC 100-240VAC (50/60Hz).
- Output: DC 12V (specified as DC 12V +/- 5%).
- Total power budget: 10A total output current.
- Outputs: 18 channels.
- Per-channel protection: resettable PTC fuse with LED indicator (PTC rating listed as 1.1A per channel).
- Protection behavior: independent circuit protection for short conditions (PTC opens on fault, then returns after the condition is removed), plus high-voltage/surge and over-current self-protection behavior.
- Construction: metal housing with reinforcement, includes a lock with keys, and includes an AC plug.
Pros and tradeoffs compared to simpler CCTV power supplies
When it is a great fit
If your priority is running many DC12V devices from one place, this box helps you keep wiring organized while adding per-channel resettable protection. That can be especially useful in multi-camera setups where troubleshooting is easier when a single output can isolate a fault instead of shutting everything down.
Where buyers may need to plan ahead
The lack of per-output switches is a clear workflow tradeoff. If you frequently power-cycle individual cameras during setup, firmware work, or diagnostics, you may prefer a unit with individual toggles. In practice, some installers handle this with external inline switches, or by controlling cameras through the NVR/DVR workflow.
Verdict
The EVERSECU 18-channel DC12V reset-fuse power box is a solid option for multi-camera CCTV builds that want centralized distribution, per-output LED status, and resettable PTC protection so one problematic channel does not automatically become a system-wide outage. It is best for buyers comfortable planning for per-camera control externally, and for anyone whose cameras and accessories fit within the stated per-channel and total current limits.
FAQ
1) How many cameras can this power box run?It provides 18 DC12V outputs. How many cameras you can run in practice depends on each camera’s power draw and staying within the total 10A output budget and the per-channel PTC fuse rating.
2) Are the fuses replaceable or resettable?Each output uses a resettable PTC fuse. When a fault condition occurs, the affected output opens, and once the condition is removed it automatically returns to a closed state.
3) Does one bad camera shut down all the others?The design focuses on independent channel protection, so a problem on one output is intended to only affect that specific channel rather than disabling all outputs.
4) Does it include a per-output power switch?No per-output switches are included. If you need individual on/off control for troubleshooting or staged installation, plan for external inline switching.
5) What input voltage does it accept?It is specified for AC 100-240VAC input (50/60Hz).
Specifications
| Product Title | EVERSECU 18 Channel DC12V 10 Amp Reset Fuse CCTV DC Distributed Power Box with AC Plug and Lock for Security Cameras, DVRs, CCTV Power Supply |
|---|---|
| Category | Electronics > Power Accessories > PDUs |
| Brand | EVERSECU |
| Manufacturer | EVERSECU |
| Material | Metal |
| Product Dimensions | 8.46"W x 9.84"H |
| Brand Name | EVERSECU |
| UPC | 605621342951 |
| Model | ES-120W-B |
| Part Number | ES-120W-B |
| Unit Count | 18.0 Count |
| Maximum Current | 10 Amps |
| Number Of Circuits | 18 |
| Phase Type | Three Phase |
| Item Dimensions L x W x H | 8.46"W x 9.84"H |
| Material Type | Metal |
| AC Adapter Current | 10 Amps |
Recommended next
18 Output 29 Amp 12V DC CCTV Distributed Power Supply Box for Security Camera, UL Listed
This 18-output 12V DC CCTV distributed power supply is designed for installations that need multiple camera runs from one centralized box. With regulated power, individual fuse protection per channel, and a manually adjustable voltage range (12V to 13.7V), it’s a solid fit for powering 12V security cameras, including IR night vision, but it is sized for 12V DC systems and requires careful total current planning across all cameras.
CyberPower CPS1215RMS Surge Protector, 120V/15A, 12 Outlets, 15 ft Power Cord, 1U Rackmount
The CyberPower CPS1215RMS is a 1U rackmount surge protector with 12 NEMA 5-15R outlets (front and rear) and a 15 ft power cord, built for network racks, data closets, and home office setups that need flexible plug access. It’s commonly chosen for its solid metal housing, low-profile rack fit, and practical outlet layout, with the main tradeoff being that it’s not a smart PDU and surge performance cannot be “proven” after installation.
TRENDnet 6-Outlet Managed PDU, TPI-06, Rackmount Power Distribution Unit, UL review
The TRENDnet TPI-06 is a network-manageable, rackmount PDU with six controllable NEMA 5-15R outlets plus one bypass outlet, built for remote power control and per-outlet monitoring. It’s a strong fit for small server closets, labs, and home networking setups that benefit from scheduled power and email alerts, with the main caveat that managed features require using TRENDnet Hive.
EVERSECU 9 Channel DC12V 5 Amp PTC Fuse CCTV Power review
The EVERSECU 9 Channel DC12V 5 Amp PTC Fuse CCTV power supply is a metal, lockable 12V DC distribution box designed for multi-camera setups. Each output includes an independent resettable PTC fuse with an LED, aiming to limit faults to the affected channel while the rest keep running.