Evertech 16 Channel 12 Volt DC Output CCTV Distributed Power Supply Box
Quick take
The Evertech 16-channel 12V DC CCTV distributed power supply box consolidates power for many cameras into one lockable metal enclosure. Buyers commonly like the easier wiring, per-channel protection, and the way a dedicated supply can reduce video issues compared with relying on camera or DVR adapters. The main buying caveat is capacity, each channel is fused at 1.1A, so you need to confirm your camera power draw fits the overall 12V 10A max.
Pros and cons
Pros
- 16 independent 12V DC outputs with individual resettable PTC fuses for overload and short-circuit protection.
- Metal housing with key lock, plus wall-mounting holes for a more secure installation.
- AC input accepts 100-240V, making it suitable for typical US power as well as wider voltage ranges.
- Includes 18 DC male pigtail connectors and a 3-prong AC power cord for a ready-to-wire setup.
Cons
- It is a 12V DC distributor, so it only works for cameras and accessories that accept 12V DC (not higher-voltage or PoE gear).
- Channel current and total draw matter, with a 12V 10A maximum output and 1.1A per channel fuse rating.
- Management of wiring and unused leads is on you, you must connect each output through the terminal blocks and cap or route unused channels.
- Adjustable output voltage (12-15V) can be helpful, but if you are unsure about your camera’s required input voltage, you will need to verify before powering on.
What buyers think
Buyer-review evidence centers on installation practicality and real-world power stability. Many shoppers describe the unit as straightforward to set up and a “required component” for multi-camera surveillance, especially when replacing or supplementing weaker adapter-based power. Several reports mention fewer video problems or improved picture behavior after moving to centralized 12V DC distribution, though review evidence is not consistent enough to claim a universal video-quality improvement for every system. Overall, the feedback pattern suggests buyers value consolidated wiring, per-output protection, and the physical security of the enclosure, with occasional limitations noted around long-term reliability or the need to troubleshoot output/power loss if the system eventually degrades over time.
Who this power supply is for
This is a strong fit for homeowners and small business installers who want a single, dedicated 12V DC distribution box for multiple analog CCTV cameras and related 12V devices (such as DVR-related power needs) in one enclosure. If your current setup uses individual camera power adapters, this can be a cleaner wiring approach, and the per-channel resettable fuse design can help protect against overloads on specific outputs.
What to know before you buy
Match your cameras to 12V DC input
Because this unit provides 12V DC outputs, it is only appropriate for cameras (and any connected 12V accessories) that explicitly require 12V DC. If your cameras are PoE or require a different voltage, you will need a different type of power solution.
Capacity and per-channel limits
Key numbers to plan around are the 12V DC 10A maximum supply current and 1.1A fuse rating per channel. For best results, confirm each camera’s power draw (usually listed in watts or amps for 12V) and make sure the total draw stays within the 10A max, including any additional 12V loads you intend to power from the box.
Voltage adjustment is available, but verify camera requirements
The unit includes a voltage adjust trimmer from 12V to 15V. That flexibility can be useful when a system needs a specific operating voltage margin, but it also means you should verify your camera manufacturer’s recommended input voltage and set the supply accordingly before connecting power.
Key features that affect daily use
Individual resettable PTC fuses per output
Each DC output is protected with a resettable PTC fuse. In practical terms, this helps limit damage and isolate issues when an individual channel is overloaded or experiences a short circuit, without forcing you to replace traditional fuses.
Lockable, durable enclosure
The wear-resistant metal housing with a key lock is designed for controlled access. It also includes wall-mounting holes and internal wiring access features, which can help keep the installation cleaner and more secure.
Wiring method: terminal blocks and channel labeling
Outputs are accessed via terminal blocks marked for positive (+) and negative (-). If you are planning a longer run or pre-terminated camera leads, having a predictable wiring point per channel can simplify labeling, routing, and future changes.
Pros and cons for different camera setups
Best for multi-camera analog CCTV runs
If you are distributing power to many 12V DC cameras, consolidating adapters into one box can reduce clutter and make maintenance easier. The per-channel protection also supports selective troubleshooting if a single camera or lead causes a problem.
Not ideal for PoE-only systems
If your cameras are PoE, you should not use a 12V DC distribution box as a substitute. You would typically use a PoE switch or PoE injector system designed for network-powered cameras.
Verdict
The Evertech 16-channel 12V DC CCTV distributed power supply box is a practical choice for structured, multi-camera analog surveillance setups that benefit from one centralized, lockable power distribution point. It earns strong marks for installation convenience and the convenience of individual resettable fuses, with the biggest “make sure you plan it” factor being power budgeting per channel and total 12V 10A capacity. If you confirm your cameras are 12V DC and keep the load within spec, it is a solid upgrade path from scattered adapters.
FAQ
Is the Evertech 16-channel power supply compatible with all CCTV cameras?
It is designed for devices that accept 12V DC input. If your cameras require a different voltage or are PoE cameras, you will need a different power solution.
What does “1.1A per channel” mean in practice?
Each of the 16 outputs is protected by a resettable PTC fuse rated at 1.1A. Make sure each connected camera’s power draw stays within that channel limit.
What is the total output capacity?
The unit is specified for 12V DC with a maximum output supply current of 10A. Your combined camera and accessory loads should not exceed that total.
Does it include connectors and power cord?
Yes. It includes a 3-prong AC power cord and DC male pigtail connectors for distributing power to camera leads.
Can I adjust the output voltage?
Yes. There is a voltage adjustment trimmer that can be set from 12V to 15V. Double-check your cameras’ recommended input voltage before powering on.
What kind of protection does it offer?
It includes short-circuit protection and over-current protection through individual resettable PTC fuses, along with additional safety protections such as high-voltage protection.
Specifications
| Product Title | Evertech 16 Channel 12 Volt DC Output CCTV Distributed Power Supply Box for Security Camera with 18 Pcs. DC Male Pigtail |
|---|---|
| Category | Electronics > Power Accessories > PDUs |
| Manufacturer | EVERTECH |
| Item Weight | 4.11 pounds |
| Package Dimensions | 9.88 x 8.46 x 2.76 inches |
| Item model number | SPB18C10PDJ181 |
| Is Discontinued By Manufacturer | No |
Recommended next
EVERSECU 18 Channel DC12V 30 Amp Reset Fuse CCTV DC Distributed Power Box with AC Plug and Lock for Security Cameras, DVRs, CCTV Power Supply
The EVERSECU 18-channel DC12V CCTV power box is designed for distributed 12V camera power, with per-output PTC resettable fusing, LED indicators, and multiple protection modes. It is a solid fit for multi-camera installs that want channel-by-channel fault isolation, but you will need to plan for per-channel current capacity and consider fan noise if the enclosure will be placed in a quiet space.
CyberPower CPS1215RMS Surge Protector, 120V/15A, 12 Outlets, 15 ft Power Cord, 1U Rackmount
The CyberPower CPS1215RMS is a 1U rackmount surge protector with 12 NEMA 5-15R outlets (front and rear) and a 15 ft power cord, built for network racks, data closets, and home office setups that need flexible plug access. It’s commonly chosen for its solid metal housing, low-profile rack fit, and practical outlet layout, with the main tradeoff being that it’s not a smart PDU and surge performance cannot be “proven” after installation.
EVERSECU 18 Channel DC12V 10 Amp Reset Fuse CCTV DC Distributed Power Box with AC Plug and Lock
The EVERSECU 18-channel DC12V PTC-fused power box is designed for running multiple security cameras from a single AC input. Each output has its own resettable fuse and LED status, with short and over-current protection to limit what goes down if one channel has an issue. It is a strong fit for multi-camera analog or IP projects that want centralized, per-channel protection, with the tradeoff that there are no individual output switches.
netBooter NP-02B Remote Switched PDU with 2 Power Outlets, 120V/13A. Control via Web, telnet, or USB
The Synaccess netBooter NP-02B is a compact, independently controlled 2-outlet remote switched PDU for network equipment, designed for web and telnet (plus a USB serial port option). It supports autoping-based reboot, plus daily or weekly scheduling, but features and interfaces are not equally “friendly” for everyone, and the limited outlet count makes it a niche fit.