EVERSECU 18 Channel DC12V 30 Amp Reset Fuse CCTV DC Distributed Power Box with AC Plug and Lock for Security Cameras, DVRs, CCTV Power Supply
Quick take
This 18-output DC12V CCTV power distribution box is built for multi-camera installs where each channel needs its own protection. It uses resettable PTC fuses with LED indicators and includes protection features for short, high-voltage, and over-current events, but you should size your cameras to the per-channel and total current limits and plan for airflow and potential fan noise.
Pros and cons
Pros
- 18 independent DC12V outputs, each with a resettable PTC fuse and LED indicator.
- Protection designed to limit the impact of faults to an individual output, not the whole unit.
- Built with a metal enclosure and includes AC plug and a lock with keys.
- Cooling features were called out positively compared with simpler “no-vent” CCTV power supplies.
Cons
- Fan noise is a realistic consideration, since buyers have noted it can be noticeable.
- You still have to account for power budgeting, including total 30A capacity and up to 1.1A per channel.
- For some layouts, internal cable routing and connector lengths can be a practical install detail.
What buyers think
Buyer-review evidence points to a few consistent themes. Many people bought this to solve a real-world power shortfall, reporting that cameras powered more reliably after switching from a lower-output supply. Setup and usability come up often, including mounting and the usefulness of the channel switches and circuit protection. Buyers also tended to like the cooling approach, with the vented front panel and fan being treated as a meaningful advantage over smaller, more basic enclosures. The main recurring downside is that the fan can be noisy for some setups, though opinions vary on whether the noise is excessive. Overall, review sentiment is strongest around channel protection, adequate distributed power, and practical day-to-day operation once installed.
What this power box is for
The EVERSECU 18-channel DC12V power distribution unit is meant to replace multiple separate “power cubes” or underpowered supplies with one centralized AC input and many DC output channels. It is designed for common CCTV loads such as fixed cameras, PTZ cameras, IR illuminators, video processors, and access-control devices that run on DC12V.
Key features that matter for multi-camera installs
Per-output resettable protection (PTC) with LED indicators
Each of the 18 outputs has an independent PTC resettable fuse and an LED indicator. The practical benefit is fault isolation. If an output experiences a short or overload event, the protection is designed so only the affected output is impacted while the rest can keep running.
Multiple protection modes
Beyond channel-level resettable fusing, the unit is also described as having protection for circuit short conditions, high voltage events using surge protection, and over-current scenarios that move the supply into a self-protection state and return to normal once conditions clear.
Power capacity you have to size correctly
The unit is specified for AC 100-240V input and provides DC12V output with a total supply current of 30A. It also lists a maximum per channel rating of 2A/Channel and a PTC fuse rating of 1.1A per output. In practice, this means you should confirm your cameras’ current draw per channel and account for any power loss over longer runs, so the overall total and each channel stay within the operating limits.
Cooling, enclosure design, and install convenience
Buyers have highlighted cooling as a differentiator, especially the presence of a fan and a vented front panel. The enclosure is metal, includes reinforcement, and comes with a lock and keys, which can help when the box is mounted where access should be controlled.
Setup and real-world usability
Reviewers frequently describe the unit as easy to use and easy to mount, with switches and visible indicators that support troubleshooting. The most important install consideration is planning your camera wiring and power budgeting upfront, especially if you are moving from a smaller 10A or otherwise underpowered supply. Some buyers also mention that connector placement and cable length can affect how cleanly you can route wires between the power box and your DVR, so it is worth checking your layout before committing to final mounting.
Pros and cons summary
- Best for: installers and homeowners building a distributed DC12V CCTV system with 18 channels and wanting channel-by-channel fault isolation (rather than one failure taking out everything).
- Who should buy: multi-camera setups, color night vision cameras with higher power needs, and anyone who prefers resettable protection over replacing fuses after a short.
- Who should avoid: installs where fan noise is unacceptable, or setups that cannot be sized correctly to the unit’s total 30A capacity and per-output limits.
Is it worth it?
If your main pain point is reliable DC12V power across multiple security cameras, especially when channel protection and resettable behavior matter, the EVERSECU 18-channel power box is a compelling option. The biggest reasons people stick with it are improved camera reliability compared with underpowered supplies and the practical benefit of independent protection per output. Just make sure your cameras’ power draw fits the unit’s capacity, and think about where the fan-equipped enclosure will be located.
FAQ
How many cameras can this power box support?
It provides 18 DC12V outputs with a total 30A capacity. The real number of cameras depends on each camera’s current draw per channel. If your cameras need near the maximum per-channel current, fewer cameras will fit within the total current budget.
Does one short shut down the entire system?
The design focuses on independent PTC protection per output, so faults should be isolated to the affected channel, allowing other outputs to continue powering.
Is the fuse resettable?
Yes. The unit uses PTC resettable fuses for each output, which are intended to open during a fault condition and return to normal after the condition clears.
Is there a fan, and is it quiet?
The unit uses forced air cooling, and some buyers have noted that the fan can be noticeable. If you plan to place the enclosure in a quiet indoor area, consider that noise may be a tradeoff.
What input voltage does it use?
It is specified for AC 100-240V input (50/60Hz).
What devices can it power?
It is designed for DC12V loads such as CCTV cameras, PTZ cameras, IR illuminators, video processors, and certain access-control systems, as long as their voltage and current requirements match the power box’s output ratings.
Will it work with both older and newer DC-only cameras?
The unit is a DC12V distribution box, so it is intended for devices that require DC power. It can be a good upgrade when cameras have changed to DC-only, but you still need to verify each camera’s DC12V current draw.
Specifications
| Product Title | EVERSECU 18 Channel DC12V 30 Amp Reset Fuse CCTV DC Distributed Power Box with AC Plug and Lock for Security Cameras, DVRs, CCTV Power Supply |
|---|---|
| Category | Electronics > Power Accessories > PDUs |
| Brand | EVERSECU |
| Manufacturer | EVERSECU |
| Model Name | EVERSECU 18 Channel DC12V 30 Amp Reset Fuse CCTV DC Distributed Power Box |
| Model Number | CP1218-30A |
| Item Weight | 3.07 Kilograms |
| Compatible Devices | Camera |
| Connector Type Used on Cable | lightning |
| Output Wattage | 30 Watts |
| Form Factor | ATX |
| Wattage | 360 watts |
| Cooling Method | Air |
| Power Supply Design | Non-Modular |
| Connector Quantity | 18 |
| Current Rating | 30 Amps |
| Maximum Input Voltage | 240 Volts |
| Minimum Input Voltage | 100 Volts |
| UPC | 778299332200 |
| Mfr Part Number | CP1218-30A |
| Connector Type | lightning |
Recommended next
CyberPower CPS1215RMS Surge Protector, 120V/15A, 12 Outlets, 15 ft Power Cord, 1U Rackmount
The CyberPower CPS1215RMS is a 1U rackmount surge protector with 12 NEMA 5-15R outlets (front and rear) and a 15 ft power cord, built for network racks, data closets, and home office setups that need flexible plug access. It’s commonly chosen for its solid metal housing, low-profile rack fit, and practical outlet layout, with the main tradeoff being that it’s not a smart PDU and surge performance cannot be “proven” after installation.
TRENDnet 6-Outlet Managed PDU, TPI-06, Rackmount Power Distribution Unit, UL review
The TRENDnet TPI-06 is a network-manageable, rackmount PDU with six controllable NEMA 5-15R outlets plus one bypass outlet, built for remote power control and per-outlet monitoring. It’s a strong fit for small server closets, labs, and home networking setups that benefit from scheduled power and email alerts, with the main caveat that managed features require using TRENDnet Hive.
Tripp Lite Metered PDU, 15A, 16 Outlets (5-15R), 120V, 5-15P, 15 ft. Cord, 0U Vertical Rack-Mount Power (PDUMV15)
The Tripp Lite PDUMV15 is a vertical 0U rack-mount metered PDU with 16 NEMA 5-15R outlets and a built-in two-digit current meter so you can monitor total load in amps. It is a solid choice for data closets, home A/V racks, or labs where you want cleaner cable management than basic power strips, with the main tradeoff being limited guidance for mounting and a 15 ft input cord that can create cable slack.
Proxicast ezOutlet5-2R dual outlet internet power switch with automatic reboot (EZ-73a)
Proxicast ezOutlet5-2R is a dual-outlet, internet-connected power switch designed to monitor connectivity and automatically power-cycle devices like modems and routers when your broadband drops or equipment locks up. It supports Wi-Fi (2.4G) or Ethernet, lets you control outlets via a mobile app, cloud web interface, or Google Home integration, and includes scheduling for routine power cycles. The biggest buying caveat is that advanced monitoring features like event logs and notifications may require a subscription.