Tripp Lite Metered PDU, 15A, 16 Outlets (5-15R), 120V, 5-15P, 15 ft. Cord, 0U Vertical Rack-Mount Power (PDUMV15)
Quick take
The Tripp Lite PDUMV15 is a vertical, rack-mount metered PDU that gives you 16 NEMA 5-15R outlets plus a built-in two-digit current meter to help you monitor total draw in amps. It is a practical upgrade from zip-tied power strips for anyone powering multiple devices in a rack or enclosure, with the main catch being that mounting instructions can be confusing and the 15 ft cord may add cable management work.
Pros and cons
Pros
- 16 NEMA 5-15R outlets for distributing power to many 120V devices from a single input.
- Integrated current meter with a two-digit, lighted display to show combined output current.
- All-metal construction designed for demanding environments, plus a covered, locking power switch.
- Includes a 15A circuit breaker.
Cons
- Mounting instructions may not be straightforward for all rack styles, requiring extra patience and parts handling.
- The 15 ft (4.5 m) input cord can create extra slack to route, especially when the UPS and rack are close.
What buyers think
Buyer feedback consistently highlights the PDU’s usefulness for powering multiple devices in an enclosure, especially because it replaces improvised power strip setups. Many reviewers specifically mention the convenience of the ammeter readout for understanding how much current is being drawn, and they also describe the unit as sturdy and well-built for rack use. Overall, buyer-review evidence points to strong day-to-day practicality, with limited but real friction around installation guidance.
How the PDUMV15 metered PDU fits into a rack setup
This is a 120V, 15A metered PDU built around vertical distribution in a 0U-friendly form factor. Instead of just offering outlets, it focuses on visibility, adding a two-digit lighted meter that reports combined total output current in amps. That matters when you are grouping multiple devices on a single feed and want to avoid guessing at load levels.
The unit provides 16 NEMA 5-15R receptacles, meaning it is intended for standard North American 3-prong (Type B) loads typical of networking gear, monitors, home theater components, and many office and lab devices that accept 5-15 style plugs.
Key features that affect buying decisions
Metering and monitoring
The integrated two-digit current meter is the main differentiator. Reviewers who bought specifically for the ammeter report satisfaction with the ability to see current draw while devices are running. If your goal is to troubleshoot load distribution, validate how busy an outlet group is, or simply stop treating rack power as a black box, this feature is one of the reasons you would choose a metered PDU over a basic strip.
Power switching and safety-minded design
The PDUMV15 includes a lighted power switch inside a transparent protective cover, which is intended to help prevent accidental toggling. A 15A circuit breaker is also included, giving you built-in overcurrent protection for the PDU itself.
Rack mounting and build
The housing is made from all-metal extruded aluminum, positioned as suitable for network closets, labs, and factory environments. In practice, buyers report the unit mounts well when your enclosure supports the style of attachment points it expects.
Pros and cons in plain language
Where it makes the most sense
- You want total load visibility: the meter display is useful when you are distributing power across many connected devices.
- You are replacing basic power strips: the rack-oriented layout and outlet count help clean up cable management inside an enclosure.
- You need multiple 120V outlets: 16 NEMA 5-15R receptacles are a strong fit for A/V closets, network setups, and similar spaces.
Where you may want to think twice
- If your rack mounting is very specific: installation may require extra attention due to unclear mounting instructions for some setups.
- If you have tight cable routing: the 15 ft input cord can result in extra slack when your UPS or power source is close.
Verdict: is this metered PDU worth it?
The PDUMV15 is a strong pick when you want a vertical rack-mount PDU with a built-in current meter and enough outlets (16 total) to consolidate power cleanly. It is especially appealing for users who value monitoring total draw in amps and want a more reliable, enclosure-ready alternative to improvised power strip setups. The main reasons it might not be the best fit are practical, not performance-related: confusing mounting instructions and the possibility of extra cable slack due to the long input cord.
FAQ
How many outlets does the PDUMV15 have?
It has 16 NEMA 5-15R outlets for connecting 120V devices with 5-15 style plugs.
What does the meter display?
The PDUMV15 includes a two-digit lighted meter that reports combined total output current in amps.
What input plug does it use?
It uses an attached NEMA 5-15P 15A 120V input plug, with a 15 ft (4.5 m) line cord.
Does it have circuit protection and a power switch?
Yes. It includes a 15A circuit breaker, and it has a lighted power switch located inside a transparent protective cover.
Is it suitable for UPS or generator power?
It is designed to distribute power in rack environments, including setups where alternate-waveform UPS or generator power is being passed through to connected equipment.
Who is this PDU best for?
It is best for home A/V racks, network closets, labs, and small rack enclosures where you want centralized, meter-based monitoring and a tidy outlet layout.
Who should avoid it?
If you prefer simple, low-cable-install PDUs or your mounting approach is highly specific, you may find installation guidance challenging and the 15 ft cord hard to route cleanly.
Specifications
| Product Title | Tripp Lite Metered PDU, 15A, 16 Outlets (5-15R), 120V, 5-15P, 15 ft. Cord, 0U Vertical Rack-Mount Power (PDUMV15) |
|---|---|
| Category | Electronics > Power Accessories > PDUs |
| Brand | TRIPP LITE |
| Manufacturer | Tripp Lite |
| Model Number | PDUMV15 |
| Color | Silver |
| Item Weight | 1720 Grams |
| Number of Outlets | 16 |
| Voltage | 120 Volts |
| Other Special Features of the Product | Mountable |
| Maximum Current | 15 Amps |
| Power Plug Type | Type B - 3 pin (North American) |
| Plug Type | Type B |
| Number of Ports | 16 |
| Compatible Devices | Hair Dryer, Set Top Box, Noise Maker, Freezer, Fax Machine, Modem, Iron, Tablet, Cellular Phone, Mixer Grinder, Microwave Oven, Gaming Console, Refrigerator, Smartwatch, Laptop, Projector, Radio, Air Conditioner, Television, Printer, Electric Fountain, Rice Cooker, Toaster, Lamp, DVD Player, MP3 Player, Home Theater, Light, E-Reader, Personal Computer, Smartphone, Router, Scanner, Speaker, Camera, Water Boiler, Monitor, Coffee Machine, Audio Sound System, Fan, Heater, Juicer |
| Smart Energy Saving | No |
| Amperage | 15 Amps |
| Item Dimensions L x W | 52"L x 4"W |
| Recommended Uses For Product | Apartment, Hotel, Office, Restaurant, TV |
| EU Spare Part Availability Duration | 2 Years |
| UPC | 037332132536 611101540892 031827613449 373321325368 956257958390 777779924829 803982827579 785828700409 |
| Global Trade Identification Number | 00037332132536, 00785828700409 |
| Mfr Part Number | PDUMV15 |
| External Testing Certification | UL60950-1 (USA) and CAN/CSA C22.2 No. 60950-1-03 (Canada) |
| Unit Count | 1.0 Count |
| Shape | Rectangle |
| Enclosure Material | Metal |
Available variants
Style
- 24 Outlets
- 36 Outlets
- 8 Outlets
- 28 Outlets
- 14 Outlets
- 6 Outlets
- 16 Outlets
Size
- 30 Amps
- 20 Amps
- 15 Amps
Recommended next
Tripp Lite Metered PDU, 20A Dual Circuit, 32 Outlets (5-15/20R), 120V, L5-20P/5-20P, 10 ft. Cord, 0U Vertical Rack-Mount Power (PDUMV40)
The Tripp Lite PDUMV40 is a 0U vertical, dual-circuit metered PDU built for rack setups that need clear power budgeting. With 32 NEMA 5-15/20R outlets split across two independent 20A circuits and separate current readouts, it’s designed to simplify load balancing for redundant power systems. The main tradeoff is cost and that metering only helps if you plan your rack power layout around the two circuits.
CyberPower CPS1215RMS Surge Protector, 120V/15A, 12 Outlets, 15 ft Power Cord, 1U Rackmount
The CyberPower CPS1215RMS is a 1U rackmount surge protector with 12 NEMA 5-15R outlets (front and rear) and a 15 ft power cord, built for network racks, data closets, and home office setups that need flexible plug access. It’s commonly chosen for its solid metal housing, low-profile rack fit, and practical outlet layout, with the main tradeoff being that it’s not a smart PDU and surge performance cannot be “proven” after installation.
Tripp Lite Metered PDU, 10 Outlets (8 C13, 2 C19) (PDUMH20HV)
The Tripp Lite PDUMH20HV is a 1U, all-metal, metered rack-mount power distribution unit with 10 outlets (8×C13, 2×C19) arranged into two load banks. It prioritizes simple, reliable power distribution and local load monitoring so you can keep track of current draw as you add equipment. The main caveat is that it is not a breaker-protected or outlet-level switched PDU, so it suits setups that already handle upstream protection.
PCB Double-Layer Wiring Power Distribution Board Kit, 2 x 12 Position Power Distribution Module
This PCB double-layer power distribution board kit (2 boards) splits one 24V input into up to 13 output channels and supports flexible wiring options, including expanding with multiple boards or creating multi-point connections. It is a practical, budget-friendly way to land many cables cleanly for model electronics and other low-voltage DC/AC distribution needs.