PCB Double-Layer Wiring Power Distribution Board Kit, 2 x 12 Position Power Distribution Module
Quick take
This PCB power distribution board kit splits a single 24V supply into a set of 13 dual-pass output channels, packaged as two identical boards. It is a good fit for hobby and maker builds where you want a tidy way to route power to many accessories, such as model train projects. The main caveat is staying within the stated 24V operating voltage and 10A current limit, especially when feeding multiple outputs from the same supply.
Pros and cons
Pros
- Offers a 13-output distribution approach for one 24V input (2 boards included).
- Supports multiple connection styles, including expanding by wiring multiple boards together.
- Uses double-layer thick PCB wiring intended to improve power flow.
- Built with copper pin terminals, designed for stable and reliable connections.
Cons
- Best suited for low-voltage DC or AC distribution, not high-voltage mains applications.
- Current handling depends on total current, so it may require planning for how many outputs you power at once.
- It is a wiring/power-routing component, so it does not provide features like sensing, regulation, or protection modules beyond basic distribution.
What buyers think
Buyer-review evidence is fairly consistent around practical usefulness for multi-connection model and hobby setups. Reviewers describe it as working as intended for distributing power to multiple accessories and highlight value for the money. There are also mentions that it helps land a lot of cables and that the build quality feels well engineered for the jobs it is designed to do. Overall, the review themes point to reliability in real wiring projects, but the dataset here is limited in detail, so it is harder to draw a strong pattern about long-term durability or performance across specific load types.
What this power distribution board kit is for
This kit is designed to take a single power feed and distribute it across multiple output channels on a PCB. The intended sweet spot is projects that need the same voltage and power source shared by multiple accessories, where you want cleaner wiring than using ad-hoc terminal blocks and jumpers.
Because it is rated for 24V operation and up to 10A current, it is most relevant to low-voltage DC or AC distribution tasks. Typical buyers include hobbyists building accessory systems and model electronics that need multiple connection points from a common supply.
Key features and how the wiring options work
13-channel distribution from one input
The board’s core function is to split a single channel power supply into 13 dual-pass output channels. This makes it easier to connect many devices to the same power source without redesigning your wiring every time you add an accessory.
Three connection methods for different layouts
Instead of forcing one wiring style, the board is designed around multiple ways to configure connections:
- Direct split: divide the positive and negative poles of one input channel into 13 channels.
- Expand interfaces: connect multiple boards together when you need more power interfaces.
- Multi-point effect: short-circuit interfaces at both ends of the board to create a multi-point single-pass style.
Double-layer thick PCB wiring and copper terminals
The kit uses double-layer thick wiring on the PCB, which is intended to support better power flow through the board. Terminals are made from copper pin terminals, aiming for stable, reliable contact when you attach wiring to the outputs.
Key specifications to confirm before you buy
- Number of boards: 2
- Output channels: 13
- Operating voltage: 24V (DC or AC compatible)
- Output current: up to 10A (follow total current limits, not just individual output expectations)
- Board size: approximately 9.9 x 1.9 x 1.2 cm
- Materials: copper terminals and PCB copper wiring
If your project power draw is close to the limit, treat 10A as a total system planning constraint across all outputs you power simultaneously.
Pros and cons for common buyer use cases
Best for
- Model and hobby accessory wiring: distributing power to multiple accessories from one 24V source.
- Projects that need more connection points later: use the ability to connect several boards for expansion.
- Clean cable management: reviewers specifically mention it helps land many cables more neatly.
Who should avoid it
- High-voltage or mains power projects: it is intended for 24V low-voltage distribution.
- Builders who need smart features: this is a distribution component, not a regulated supply, sensor, or protection system.
- Anyone unwilling to plan current draw: you will need to ensure your total load stays within the 10A constraint.
Price and availability
This is positioned as an affordable, practical power distribution accessory kit. If you are comparing options, treat value as a combination of board count (2 boards), channel count (13 outputs), and whether your project matches the 24V and 10A requirements.
How it compares to other PDU-style options
Because this is a PCB distribution board kit, it sits on the simpler end of the PDU spectrum. If you are choosing between distribution approaches, consider:
- Simple PCB distribution vs. enclosure PDUs: PCB kits are great for custom builds and tight spaces, while enclosed PDUs can be easier for quick installs and labeling.
- Power routing vs. protection/regulation: this board focuses on splitting and routing, so if you need safeguards or voltage regulation, you will likely want a more feature-complete power solution.
- Channel count needs: if you need many outputs, the expand-by-adding-boards approach can be a cost-effective path.
Without a one-size-fits-all alternative named here, the best comparison is your required voltage (24V), current budget (10A total), and how many channels you need today and in future add-ons.
Verdict
If your project runs on 24V and you want a straightforward way to split power across many accessory channels, this double-layer PCB distribution kit can be a solid choice, especially for hobby builds. The tradeoff is that you must do the electrical planning yourself, mainly around total current draw, because this component is built for distribution rather than built-in protection or smart control.
FAQ
Common questions
- What voltage is this power distribution board kit designed for? It is designed for 24V operation and supports DC and AC distribution.
- How many outputs does one board provide? Each board provides distribution across 13 channels.
- What is the maximum current rating? The maximum current is 10A, and you should observe total current limits across the powered outputs.
- Can I connect multiple boards together? Yes, the design includes an option to connect several boards to expand power interfaces.
- Is this suitable for mains voltage? No, it is intended for low-voltage 24V power distribution.
Specifications
| Product Title | PCB Double-Layer Wiring Power Distribution Board Kit, 2 x 12 Position Power Distribution Module 2 Inputs 2 x 13 Outputs for DC AC 24V 10A |
|---|---|
| Category | Electronics > Power Accessories > PDUs |
| Brand | WayinTop |
| Manufacturer | WayinTop |
| Material | Copper |
| Brand Name | WayinTop |
| Model | FC#WYTP77-NEW |
| Part Number | Power Distribution Board Kit |
| Maximum Current | 10 Amps |
| Number Of Circuits | 13 |
| Phase Type | Single Phase |
| Material Type | Copper |
| AC Adapter Current | 10 Amps |
Recommended next
TRENDnet 6-Outlet Managed PDU, TPI-06, Rackmount Power Distribution Unit, UL review
The TRENDnet TPI-06 is a network-manageable, rackmount PDU with six controllable NEMA 5-15R outlets plus one bypass outlet, built for remote power control and per-outlet monitoring. It’s a strong fit for small server closets, labs, and home networking setups that benefit from scheduled power and email alerts, with the main caveat that managed features require using TRENDnet Hive.
Champion Power Equipment Pro Grade OSHA Compliant Power Distribution Box, 50-Amp Twist Lock Inlet, Six 120V GFCI Duplexes, One 120/240V 30A Locking Outlet, 30A and 50A RV Adapters
This pro-grade, OSHA-compliant power distribution box is designed to turn a single 50A inlet (generator or utility) into multiple grounded, GFCI-protected 120V duplex outlets plus one 120/240V locking outlet. It is built with a heavy-duty steel frame and weather-ready enclosure, making it a practical option for job sites, outdoor events, and storm outages, as long as you have the matching inlet cord and compatible outlet/adapters.
CyberPower CPS1215RMS Surge Protector, 120V/15A, 12 Outlets, 15 ft Power Cord, 1U Rackmount
The CyberPower CPS1215RMS is a 1U rackmount surge protector with 12 NEMA 5-15R outlets (front and rear) and a 15 ft power cord, built for network racks, data closets, and home office setups that need flexible plug access. It’s commonly chosen for its solid metal housing, low-profile rack fit, and practical outlet layout, with the main tradeoff being that it’s not a smart PDU and surge performance cannot be “proven” after installation.
WTH-CS/PDU-C13-E (US121052E) Heavy Duty Metal 1U Rack Mount PDU, Inlet C20 20A 120/240V Open end (Without Extension Cord), Outlet C13 x10 Ports
The WatchfulEyE WTH-CS/PDU-C13-E is a 1U metal rack PDU designed for tidy power distribution, with a C20 (open-end) inlet for custom cord selection and 10 IEC 320 C13 outlets for rack-friendly devices. It is best for server cabinets and lab racks where you want a solid, straightforward unit, but you need to supply the right input cord and you should confirm whether you actually need surge protection for your setup.