Bioenno Power 12V, 12Ah LFP LiFePO4 Lithium Iron Phosphate Battery (PVC, BLF-1212A)
Quick take
The Bioenno Power BLF-1212A is a 12V, 12Ah LiFePO4 battery aimed at portable 12V electronics, including amateur radio setups. Users commonly describe straightforward charging and run time that can cover real-world sessions, but its weight and size make it better for “grab-and-go” use than for long-distance lugging.
Pros and cons
Pros
- 12V, 12Ah LiFePO4 capacity for portable 12V power
- Integrated protection circuit module (PCM) for internal cell balancing and protection
- Discharge connector uses Anderson Powerpole, convenient for common hobby power wiring
- Buyers frequently mention easy use, easy charging, and solid run time for gear like 100W transmitters
Cons
- Charger choice matters, use a LiFePO4-compatible charger (not an SLA charger)
- BPC-1502DC 2A charger is not included, so you may need to purchase separately
- Not ideal for very lightweight backpacking, the battery is roughly “brick-like” in size and weight
What buyers think
Buyer-review evidence is consistent on a few decision-relevant points. Many users describe the battery as easy to operate and easy to charge, with run time that matches their portable equipment needs (especially ham radio, including scenarios involving transmitting). Several comments frame it as a good fit for field-day style setups and portable cases, rather than a travel-light option. Overall, the review themes support practical value for off-grid 12V use, while the main recurring limitation is portability for longer carries.
Key specs and what they mean for your setup
Voltage and capacity
This is a 12V battery with a 12Ah capacity, designed to power 12V devices rather than 24V systems. If your equipment is built around 12V input, this battery size is often a practical match for portable runs where you want enough energy without going to much larger packs.
Discharge limits
It supports a maximum continuous discharge current of 20A, with a peak pulse up to 40A. That makes it more capable than low-current “trickle” batteries for common hobby and portable electronics that can have higher momentary draw.
Connectors and integration
The charge connector is a DC barrel plug, while discharge uses Anderson Powerpole connectors. That matters if you already use Powerpole wiring, or if you want a familiar, modular connector system for your power distribution.
Protection and quiet operation
The integrated PCM provides internal cell balancing and protection, which can simplify safe day-to-day use. The battery is also described as having no EMI/RFI (electromagnetic interference/radio-frequency interference) and being “absolutely quiet,” which is particularly relevant for sensitive audio and radio applications.
Charging and compatibility caveat
To get the right charging behavior, plan to use a charger compatible with LiFePO4 batteries. Using an SLA charger is not the right match, so if you already own a lead-acid charger, double-check whether it is explicitly LiFePO4 compatible. The listed 2A charger (BPC-1502DC) is also not included, so budgeting for a compatible charger may be necessary depending on what you already have.
Portability, build, and everyday usability
The battery comes in a PVC case and is relatively compact, but it is also described by buyers in terms that point to “grab-and-go” rather than long-distance carrying. Expect it to feel substantial for backpacking. For setups like a portable radio case, field operations, and other short-carry use cases, that tradeoff can be worthwhile for the added energy capacity.
Who this battery is best for
- Ham radio and other portable 12V electronics where you want a compact, real-world usable energy reserve
- Buyers who prefer Anderson Powerpole discharge connectors for modular power distribution
- People who value LiFePO4 charging compatibility and want built-in protection features
Who should avoid it (or consider a different size)
- If you need a very lightweight pack for long hikes, this form factor and weight may feel too “heavy as you go.”
- If you do not already own a LiFePO4-compatible charger and do not want to add one, total setup cost could be higher than expected.
- If your device requires a different voltage or connector type, you may need adapters or a different battery model.
Verdict
The Bioenno Power BLF-1212A is a strong option for buyers building a portable 12V power setup, especially in ham radio and similar electronics where practical run time and connector convenience matter. The main things to get right are charger compatibility and accepting that it is more suitable for short carries and portable cases than for ultralight backpacking.
FAQ
How long will a Bioenno Power 12V 12Ah battery run a 12V device?
Run time depends on your device’s power draw (watts) and duty cycle. The battery’s 12V 12Ah capacity and discharge limits support portable use, but transmitting, motors, or heaters can reduce runtime compared with lower-draw accessories.
Do I need to buy a charger separately?
The 2A charger (BPC-1502DC) is not included. If you do not already have a LiFePO4-compatible charger, you will need one.
Can I charge this battery with an SLA (lead-acid) charger?
No. It should be charged using a LiFePO4-compatible charger, not an SLA charger.
What connectors does it use for charging and powering devices?
Charging uses a DC barrel plug. Discharge uses Anderson Powerpole connectors.
Is this battery good for backpacking?
It can work for portable field use, but buyer feedback suggests it is better for grab-and-go carrying and portable cases than for long-distance backpacking due to its weight and size.
Specifications
| Product Title | Bioenno Power 12V, 12Ah LFP LiFePO4 Lithium Iron Phosphate Battery (PVC, BLF-1212A) |
|---|---|
| Category | Electronics > Power Accessories > PDUs |
| Brand | Bioenno Power |
| Manufacturer | Bioenno Power |
| Model Name | BLF 1212A |
| Model Number | BLF-1212A |
| Item Weight | 3.9 Pounds |
| UPC | 857329003980 |
| Battery Cell Type | Lithium |
| Battery Capacity | 12 Amp Hours |
| Voltage | 12 Volts |
| Reusability | Rechargeable |
| Amperage | 20 Amps |
| Unit Count | 1 Count |
| Item Dimensions | 8.46 x 2.2 x 3.11 inches |
| Antenna Location | Radio |
| Battery Cell Composition | Lithium |
| Recommended Uses For Product | Radio |
Recommended next
Evertech Power Box 18 Ch Channel 12V DC 10 A Power Supply Distribution Box
The Evertech 18-channel 12V DC power distribution box is designed for CCTV camera, DVR, and similar 12V devices, with per-channel PTC resettable fuses and visible power indicators. It can simplify wiring versus multiple wall adapters, but you need to plan your total camera load carefully if you plan to use all channels.
CyberPower CPS1215RMS Surge Protector, 120V/15A, 12 Outlets, 15 ft Power Cord, 1U Rackmount
The CyberPower CPS1215RMS is a 1U rackmount surge protector with 12 NEMA 5-15R outlets (front and rear) and a 15 ft power cord, built for network racks, data closets, and home office setups that need flexible plug access. It’s commonly chosen for its solid metal housing, low-profile rack fit, and practical outlet layout, with the main tradeoff being that it’s not a smart PDU and surge performance cannot be “proven” after installation.
Proxicast ezOutlet5-2R dual outlet internet power switch with automatic reboot (EZ-73a)
Proxicast ezOutlet5-2R is a dual-outlet, internet-connected power switch designed to monitor connectivity and automatically power-cycle devices like modems and routers when your broadband drops or equipment locks up. It supports Wi-Fi (2.4G) or Ethernet, lets you control outlets via a mobile app, cloud web interface, or Google Home integration, and includes scheduling for routine power cycles. The biggest buying caveat is that advanced monitoring features like event logs and notifications may require a subscription.
Tripp Lite 24 Outlet Horizontal 1U Rackmount PDU, 15 Amps, 120V, 15ft Cord (PDU2430)
A basic, switchless 1U rackmount PDU with 24 NEMA 5-15R outlets (12 front, 12 rear) and a long 15-ft L5-30P input cord. It uses dual 15A circuit breakers, so you can split your loads across circuits, but you still need to plan outlet usage carefully to avoid tripping a breaker. Best for home labs and IT racks that want straightforward power distribution with solid mounting options.