Tripp Lite 24 Outlet Horizontal 1U Rackmount PDU, 15 Amps, 120V, 15ft Cord (PDU2430)
Quick take
The Tripp Lite PDU2430 is a straightforward, switchless 1U rack PDU designed to distribute 120V power to 24 NEMA 5-15R outlets (12 front and 12 rear). It includes dual 15A circuit breakers and a 15-foot L5-30P input cord, which helps with load planning in higher-density server and networking setups. The main buying caveat is that outlet organization matters, because overloading one circuit can trip that circuit and shut down connected equipment.
Pros and cons
Pros
- 24 standard NEMA 5-15 outlets (12 front, 12 rear) for flexible rack wiring
- Dual 15A circuit breakers to protect outlets against overloads
- Switchless design helps prevent accidental shutdowns
- Reversible all-metal housing, mounts horizontally in 1U (and supports optional vertical mounting)
Cons
- No built-in switching or per-outlet control, so it is not ideal if you need individual outlet management
- You still have to balance loads across the two circuits to avoid breaker trips
- Buyer-review evidence is limited on failure modes, and there is at least one reported issue involving the input plug type, so double-check compatibility when the unit arrives
What buyers think
Buyer-review evidence is somewhat mixed but generally points to practical day-to-day usefulness. Several comments highlight that the PDU is sturdy, space efficient for a 24-outlet layout, and works as expected in IT-style racks and office computer rooms. Reviewers also note that the front and rear outlet placement helps when you plan cable runs, and that the tight fit of power cables can reduce accidental looseness. The most notable negative theme is limited, but it includes a reported mismatch with the expected input plug configuration on one unit, so it is wise to confirm you receive the correct L5-30P-style input for your setup.
Who this PDU is for
- Home labs and small data closets that want a simple rack power distribution unit without software or outlet-level switching.
- Networking, telecom, security, and AV racks using standard NEMA 5-15 power bricks and cords.
- Teams that can plan power loads across two circuits, since the unit is built around dual 15A breaker protection.
Who should look elsewhere
- If you need remote power control (for example, per-outlet on/off, metering, or network management), this basic PDU type is likely not the right tool.
- If your rack can easily exceed one circuit during normal operation, you may want a model with more monitoring or a different circuit strategy to reduce breaker-trip risk.
- If your available input power is not compatible with the L5-30P connection, confirm electrical fit before purchase.
Key features that matter in real installs
24 outlets in a 1U footprint
With 12 outlets on the front and 12 on the rear, the PDU helps you distribute connections without making the rack cable run chaos. The tradeoff is that rear outlets do not help you if your rack layout, cable lengths, or device placement makes rear access awkward, so plan your equipment positions and patching before you mount it.
Dual circuit breaker protection, not “total” capacity freedom
Dual 15A circuit breakers protect against overloads, which is a good safety feature for dense racks. However, breaker protection also means your real usable capacity depends on how you split the load between the two circuits. Reviews mention that plugging too many high-load devices into one circuit can trip the breaker and cause multiple devices to power off together.
Switchless design for uptime-focused setups
The switchless design is intended to reduce the chance of an accidental shutdown. For many rack setups, that translates into fewer “oops” moments from bumping a control switch, but it also means there is no built-in power control to intentionally reset or sequence your gear at the PDU.
Mounting flexibility
This model mounts horizontally in a standard 1U position for 19-inch 2-post and 4-post racks and requires only a limited amount of rack depth. The housing is reversible (so you can orient it to match your cable management approach), and mounting is not limited to racks, since it can also mount on a wall, workbench, or under a counter. Vertical mounting is possible with an optional accessory, which can be helpful when rack depth or airflow layout is a concern.
Pros and cons recap
- Choose it if you want a durable, basic 1U rack PDU with lots of standard outlets and breaker protection, and you are comfortable planning your power distribution across two circuits.
- Skip it if you want managed power features (remote control, per-outlet metering, or advanced monitoring), or if you cannot reliably keep each circuit within its limits.
Price and availability
It is currently listed as in stock in the US market. For the latest pricing and availability, check the live listing.
FAQ
Does the PDU have outlets on both the front and rear?
Yes. It provides 24 NEMA 5-15R outlets, with 12 outlets on the front and 12 outlets on the rear.
Is this PDU switchable or remotely controlled?
This is a basic, switchless PDU, so it is not designed for remote outlet control. It focuses on straightforward power distribution with breaker protection.
How do the circuit breakers affect device powering?
The PDU uses dual 15A circuit breakers. If a single circuit is overloaded, that circuit can trip, shutting down the outlets tied to it. Load balancing across the two circuits is important for stable operation.
What input plug does it use?
It uses an L5-30P input plug with a 15-foot cord. Since plug compatibility matters, confirm your facility rack power configuration matches what you are installing.
Is it only for 19-inch racks?
No. It can mount horizontally in a 1U rack space, and it can also be mounted on a wall, workbench, or under a counter. Vertical mounting may require an optional accessory.
Is it suitable for home server racks?
For many home lab setups, it can be a good fit because it offers a dense 24-outlet layout in 1U, uses standard NEMA 5-15 outlets, and includes basic overload protection. If your setup needs monitoring or per-outlet control, you would likely want a different category of PDU.
Specifications
| Product Title | Tripp Lite 24 Outlet Horizontal 1U Rackmount PDU, 15 Amps, 120V, 15ft Cord, Power Strip for Network Server Racks, Two 15A Circuit Breakers, NEMA 5-15 Outlets & L5-30P Input, 5-Year Warranty (PDU2430) |
|---|---|
| Category | Electronics > Power Accessories > PDUs |
| Brand | TRIPP LITE |
| Manufacturer | Tripp Lite |
| Model Number | PDU2430 |
| Color | Black |
| Item Weight | 7 Pounds |
| Number of Outlets | 24 |
| Voltage | 120 Volts |
| Other Special Features of the Product | Mountable |
| Maximum Current | 30 Amps |
| Power Plug Type | Type B - 3 pin (North American) |
| Plug Type | Type B |
| Number of Ports | 24 |
| Compatible Devices | Hair Dryer, Set Top Box, Noise Maker, Freezer, Fax Machine, Modem, Iron, Tablet, Cellular Phone, Mixer Grinder, Microwave Oven, Gaming Console, Refrigerator, Smartwatch, Laptop, Projector, Radio, Air Conditioner, Television, Printer, Electric Fountain, Rice Cooker, Toaster, Lamp, DVD Player, MP3 Player, Home Theater, Light, E-Reader, Personal Computer, Smartphone, Router, Scanner, Speaker, Camera, Water Boiler, Monitor, Coffee Machine, Audio Sound System, Fan, Heater, Juicer |
| Smart Home Compatibility | Not Smart Home Compatible |
| Amperage | 30 Amps |
| Item Dimensions L x W | 21"L x 11"W |
| Shape | Rectangle |
| Enclosure Material | Metal |
| UPC | 151903072646 971472881414 151903688311 373321172818 012300175449 803982788559 778888472416 398000136141 037332117281 080850205923 763615949842 999998302831 179506127754 191120052816 666669784233 040421774401 |
| Global Trade Identification Number | 00037332117281, 00778888472416 |
| Mfr Part Number | PDU2430 |
| Built-In Media | PDU2430 2.9kW Single-Phase 120V Basic PDU; Mounting hardware; Owner’s manual |
| External Testing Certification | UL60950-1/CAN/CSA C22.2 No. 60950-1-03 |
| Warranty Description | 5-Year Limited Manufacturer's Warranty |
| Unit Count | 1.0 Count |
Available variants
Size
- 30 Amps
- 20 Amps
- 15 Amps
Recommended next
18 Channel 12 Volt DC Output 10A CCTV Distributed Power Supply Box for Security Camera with AC Plug and Lock (10A 18-Channel)
A 12V DC, 10A CCTV distributed power supply box designed to run up to 18 security cameras from one AC plug, with per-port fusing and multiple protection features (PTC/over-current, short-circuit behavior, surge/lightning protection, and independent output protection). Best for homeowners or installers consolidating camera power, especially when you want a centralized, protected distribution layout.
Proxicast ezOutlet5-2R dual outlet internet power switch with automatic reboot (EZ-73a)
Proxicast ezOutlet5-2R is a dual-outlet, internet-connected power switch designed to monitor connectivity and automatically power-cycle devices like modems and routers when your broadband drops or equipment locks up. It supports Wi-Fi (2.4G) or Ethernet, lets you control outlets via a mobile app, cloud web interface, or Google Home integration, and includes scheduling for routine power cycles. The biggest buying caveat is that advanced monitoring features like event logs and notifications may require a subscription.
TRENDnet 6-Outlet Managed PDU, TPI-06, Rackmount Power Distribution Unit, UL review
The TRENDnet TPI-06 is a network-manageable, rackmount PDU with six controllable NEMA 5-15R outlets plus one bypass outlet, built for remote power control and per-outlet monitoring. It’s a strong fit for small server closets, labs, and home networking setups that benefit from scheduled power and email alerts, with the main caveat that managed features require using TRENDnet Hive.
CyberPower CPS1215RMS Surge Protector, 120V/15A, 12 Outlets, 15 ft Power Cord, 1U Rackmount
The CyberPower CPS1215RMS is a 1U rackmount surge protector with 12 NEMA 5-15R outlets (front and rear) and a 15 ft power cord, built for network racks, data closets, and home office setups that need flexible plug access. It’s commonly chosen for its solid metal housing, low-profile rack fit, and practical outlet layout, with the main tradeoff being that it’s not a smart PDU and surge performance cannot be “proven” after installation.