18 Channel 12 Volt DC Output 10A CCTV Distributed Power Supply Box for Security Camera with AC Plug and Lock (10A 18-Channel)
Quick take
This 18-channel CCTV distributed power supply provides 12V DC output with a total 10A rating, designed to centralize power for security cameras and similar 12V DC devices. Buyers who use it for multi-camera setups report easy setup and reliable powering without video issues, with emphasis on the value of per-port protection. The main buying caveat is making sure your cameras’ total power draw stays within the 10A budget (120W total) and that the 12V DC requirement matches your devices.
Pros and cons
Pros
- Supports 12V DC output rated at 10A total (up to 18 channels).
- Per-output protection approach, including individual fuses/LED indicators for port-level troubleshooting.
- Multiple protection features, including short-circuit behavior and over-current self-protection.
- Centralized AC-to-distribution design, helpful for organized camera power wiring.
Cons
- Best fit for cameras/devices that are actually 12V DC, not 24V or other voltages.
- Total capacity matters, if your camera power draw approaches the 10A limit you may need a different solution.
- Review evidence in the provided snippets is limited in depth, so real-world performance details are not extensive.
What buyers think
Buyer-review evidence is generally positive and centers on practical day-to-day use: powering multiple cameras reliably, straightforward setup, and no noticeable video problems when used with multi-camera installations. Several reports specifically highlight the idea of using it to replace an existing power supply or to support home security camera arrays, with comments that the system performed as expected and that multiple units are used for installs.
That said, the available review snippets do not provide much detail on fine-grained topics like noise/heat under load, long-term longevity tracking, or comparison versus other power supplies, so patterns around those areas are limited.
Key specs that matter for choosing a CCTV power box
- Channels: 18 individual outputs.
- Output voltage: 12V DC.
- Output current: 10A total.
- Total power: 120W (10A at 12V DC).
- Form factor and connectors: White unit, listed with ATX connector type on the cable (use this to confirm compatibility with your camera harnesses).
- Physical size: 9 x 2 x 7 inches, item weight listed at 3 pounds.
- Protection features: lightning/surge protection, overload/over-current protection, short-circuit protection behavior, and independent per-output protection with separate fuse and LED indicator.
Protection and troubleshooting, port by port
A big reason people choose a distributed CCTV power supply is isolating faults. This unit’s protection design is described in a way that emphasizes independence per output: each channel includes its own fuse and LED indicator, so when a problem occurs, the impact can be contained to that output while other channels continue operating. It also uses PTC-based over-current behavior, short-circuit protection that opens and then returns when the issue is removed, and surge/lightning protection intended to help safeguard connected equipment.
For buyers managing multiple cameras, the practical benefit is less guesswork when only one camera acts up. Instead of a full system blackout, port-level indicators and independent protection can make troubleshooting faster.
Who this power supply is best for
- Homeowners running multiple wired security cameras: If your cameras are 12V DC and you want one centralized power distribution box.
- Small installations: Projects where you want an organized 18-output layout and simplified cabling from a single AC feed.
- DIYers who value organized fault isolation: Particularly when you want per-port fusing/LED indicators to help narrow down issues.
Who should avoid it (or double-check first)
- Anyone with non-12V DC cameras: This supply is designed for 12V DC output, so it is not the right fit for other voltage requirements.
- High-draw camera setups near the 10A total: You need to estimate total current draw across all connected devices to ensure you do not exceed the 10A capacity.
- Buyers expecting a plug-and-play match for every camera harness: The unit is listed with an ATX connector type on the cable, so confirm your camera leads and connector compatibility before committing.
Pros, cons, and the decision tradeoff
This power supply’s main appeal is the combination of 18 outputs, centralized 12V DC distribution, and a protection design that targets independent output behavior. In real-world use, buyer comments focus on reliability for multi-camera powering and ease of use when setting up a camera system.
The tradeoff is capacity and compatibility: the 10A total rating is shared across channels, so your camera power requirements must fit within 120W total, and your devices must be 12V DC. If you have a mixed-voltage system or a high-power set of cameras, you may need to consider a different distribution approach.
How it compares to other PDUs (what to look for)
When shopping for CCTV PDUs or distributed power supplies, the key differentiators are usually more important than brand names. Use this checklist to compare options you are considering:
- Voltage match: Confirm the unit’s output voltage matches your cameras exactly (12V DC here).
- Total current vs. per-port needs: Look at the unit’s total current rating and compare it to your combined camera draw.
- Isolation/protection style: Per-port fusing and indicators can be more useful than a single upstream fuse for troubleshooting.
- Connector compatibility: Ensure the cable/connector type you will plug into your camera power leads is compatible.
- Installation fit: Physical size and mounting/locking expectations matter, especially for tidy enclosures.
Price and availability
Pricing and stock can change. Check the current listing for the most up-to-date price and purchase options.
FAQ
How many cameras can this 12V DC power supply run?
It is listed as an 18-channel 12V DC output unit. How many cameras you can run in practice depends on each camera’s power draw and whether the combined load stays within the unit’s total 10A (120W) rating.
Does each output have separate protection?
Yes. The design is described as having independent per-output protection, including separate fuses and a separate LED indicator for each port, intended to help isolate faults to individual channels.
What is the total power capacity of this CCTV power supply?
It is rated for 12V DC output at 10A total, which corresponds to a total power of 120W across all connected channels.
What connector type does it use?
The cable connector type is listed as ATX. Confirm this fits your camera harnesses and wiring plan before purchasing.
Is lightning and surge protection included?
The unit is described as including lightning protection and surge/over-voltage protection features intended to help protect connected equipment.
Will it work if only one camera has a fault?
The protection description emphasizes independent output behavior, so the goal is that a problem on one port affects only that output while other channels can remain powered.
Does this come with a warranty?
A 1-year manufacturer warranty is listed, with coverage described as from the date of purchase (US location manufacturer warranty).
Specifications
| Product Title | 18 Channel 12 Volt DC Output 10A CCTV Distributed Power Supply Box for Security Camera with AC Plug and Lock for Security Cameras, DVRs, CCTV Power Supply (10A 18-Channel) |
|---|---|
| Category | Electronics > Power Accessories > PDUs |
| Brand | OOSSXX |
| Manufacturer | OOSSXX |
| Model Number | 10A 18-Channel |
| Color | White |
| Item Weight | 3 Pounds |
| Connector Type Used on Cable | ATX |
| Amperage | 10 Amps |
| Form Factor | ATX |
| Maximum Power | 2160 Watts |
| Output Current | 10 Amps |
| Output Voltage | 12 Volts (DC) |
| Output Wattage | 120 Watts |
| Item Dimensions | 9 x 2 x 7 inches |
| UPC | 678067333630 |
| Mfr Part Number | oossxx 01020304 |
| Warranty Description | US Location Manufacturer Warranty for 1 Year from Date of Purchase |
| Connector Type | ATX |
Available variants
Model
- 360 Watts
- 5A 9-Channel
- 10A 18-Channel
- 20A 18-Channel
Recommended next
CyberPower CPS1215RMS Surge Protector, 120V/15A, 12 Outlets, 15 ft Power Cord, 1U Rackmount
The CyberPower CPS1215RMS is a 1U rackmount surge protector with 12 NEMA 5-15R outlets (front and rear) and a 15 ft power cord, built for network racks, data closets, and home office setups that need flexible plug access. It’s commonly chosen for its solid metal housing, low-profile rack fit, and practical outlet layout, with the main tradeoff being that it’s not a smart PDU and surge performance cannot be “proven” after installation.
EVERSECU 18 Channel DC12V 10 Amp Reset Fuse CCTV DC Distributed Power Box with AC Plug and Lock
The EVERSECU 18-channel DC12V PTC-fused power box is designed for running multiple security cameras from a single AC input. Each output has its own resettable fuse and LED status, with short and over-current protection to limit what goes down if one channel has an issue. It is a strong fit for multi-camera analog or IP projects that want centralized, per-channel protection, with the tradeoff that there are no individual output switches.
StarTech.com 1U 19 inch 8 Port Rack Mount PDU (PDU08C13H)
A 1U, horizontal rack-mount PDU with eight IEC C13 outlets and built-in circuit protection, designed to tidy installs in standard 19-inch server racks. Best for setups that need organized power distribution, but buyers should plan carefully around input connection fit and total load to avoid nuisance breaker trips.
TRENDnet 6-Outlet Managed PDU, TPI-06, Rackmount Power Distribution Unit, UL review
The TRENDnet TPI-06 is a network-manageable, rackmount PDU with six controllable NEMA 5-15R outlets plus one bypass outlet, built for remote power control and per-outlet monitoring. It’s a strong fit for small server closets, labs, and home networking setups that benefit from scheduled power and email alerts, with the main caveat that managed features require using TRENDnet Hive.