Evemodel PCB005 1X Power Distribution Board (3 Inputs, 2 x 10 Outputs)
Quick take
The Evemodel PCB005 is a compact low-voltage distribution board designed to route power from up to 3 input connections to 20 output points (organized as two rows of 10). It is especially useful for model train layouts and accessory lighting where you want one organized “hub” instead of multiple hand-taps. The main buying caveat is you must match your system to its maximum voltage (30V AC/DC) and keep total and per-connection current within its limits.
Pros and cons
Pros
- Multiple connection options, 3 inputs and 2 x 10 outputs for powering more than one accessory point.
- Built for compact mounting, includes 4 mounting holes with spacers.
- Clear electrical limits for planning, max 30V AC/DC and up to 8A total supply current, with 6A max per connection.
- Comes with assorted connectors, including banana plugs and spade terminals (for common wiring to model accessories).
Cons
- It is a distribution board, not a power supply, so you still need an appropriate 2-pole DC/AC power source.
- Current limits mean higher-load accessories may require separate routing or multiple boards to avoid overloading.
- Buyer evidence is strongly focused on model train lighting use, so fit for other projects depends on your wiring plan and load requirements.
What buyers think
Buyer feedback for this PCB005 centers on practical wiring and layout convenience. Multiple users describe it as a solid way to power several accessories on a model train setup, particularly for lighting (including building or detail LEDs). Review themes also point to the board being easy to work with and having enough outputs for moderate accessory counts without needing to “double tap” other connections. Overall buyer sentiment is positive, with comments commonly reflecting good value for the intended low-voltage distribution role.
What it is, and how it fits common setups
The PCB005 is a small distribution hub meant to take one or more low-voltage inputs and provide multiple output connections. With 3 input connectors feeding 2 x 10 output terminals, it is designed for scenarios where you want to split power cleanly across many lighting points, accessory circuits, or device leads.
It is sized to mount neatly, using four holes and included spacers, which can help keep wiring organized under a layout or behind an enclosure where you want power distribution out of sight.
Key specs that determine compatibility
Voltage and current limits
- Maximum voltage: 30V AC or 30V DC.
- Total supply maximum current: 8A (noted for a 2-pole power supply to the terminal).
- Current carrying capacity per connection: 6A (maximum).
Connection layout
- Inputs: 3 connectors for voltage input.
- Outputs: 2 rows of 10 outputs, for 20 total output points.
- Mounting: 4 mounting holes and spacers included.
Included items and wiring support
Along with the board, the package includes banana plug components (red and black), a DC plug, and spade terminal connectors (10 red and 10 black). The terminal connectors are listed as supporting AWG22-16 wire, which is an important detail if you are matching existing wiring on your layout or accessory harness.
Pros and cons, in plain terms
Pros
- Good output density for accessory lighting: 20 output points helps when you have multiple LED runs or independent device leads.
- Organized wiring under a layout: mounting support plus multiple terminal points make it easier to build a tidy power plan.
- Simple planning with clear limits: voltage and current caps make it easier to size your power source and avoid overload.
- Useful for common hobby builds: buyer feedback repeatedly mentions powering multiple accessories without extra tapping.
Cons
- Not a complete power system: you still need a suitable power supply that matches the voltage and current limits (it distributes power, it does not generate it).
- May need multiple boards for higher loads: if your accessory set approaches the total 8A or per-connection 6A caps, you will likely need a revised wiring plan.
- Limited detail on advanced features: there is no indication of switching or regulation here, so it is best viewed as a wiring splitter for low-voltage distribution.
Who should buy it
Choose the Evemodel PCB005 if you want a straightforward low-voltage distribution board for a compact accessory wiring project, especially where you need many output terminals from a centralized location. It is a strong fit for model train lighting and similar hobby setups that rely on multiple small loads spread across a layout.
Who should consider other options
It may not be the right choice if your project requires higher voltage, higher current than the listed limits, or if you specifically need a power supply unit with built-in switching, regulation, or protection. If you are unsure whether your accessories will stay under the total 8A and 6A per-connection caps, you may want a distribution approach designed around your exact load profile.
Verdict
The Evemodel PCB005 is a practical, hobby-focused power distribution board that helps turn one low-voltage feed into a clean set of multiple outputs. For model train lighting and other accessory wiring where you want organized routing and enough terminal points for moderate expansion, it looks like a sensible option, as long as you plan your voltage and current loads within its 30V AC/DC, 8A total, and 6A per-connection limits.
View latest price and check availability
FAQ
What voltage can the Evemodel PCB005 handle?
The maximum voltage rating is 30V AC or 30V DC.
How many output terminals does it have?
It provides 2 x 10 outputs, for 20 total output points.
Is this board a power supply?
No, it is a power distribution board. You need to supply power from an appropriate 2-pole power supply within the board’s voltage and current limits.
What current limits should I plan for?
The total supply maximum current is 8A, and the current carrying capacity per connection is 6A (maximum).
What wire gauge do the included spade terminals support?
The included spade terminals are listed as supporting AWG22-16 wire.
Is it meant for model train lighting?
Yes, it is commonly used for powering multiple accessory points such as LEDs in model train layouts, and it has the terminal count and wiring organization that fit that use case.
Specifications
| Product Title | PCB005 1X Power Distribution Board 3 Inputs 2 x 10 Outputs for DC AC Voltage |
|---|---|
| Category | Electronics > Power Accessories > PDUs |
| Brand | Evemodel |
| Manufacturer | evemodel |
| Item Weight | 0.14 Kilograms |
| Brand Name | Evemodel |
| Model | PCB005 |
| Part Number | PCB005 |
| Number Of Circuits | 20 |
| Number of Items | 13 |
| Number of Packs | 1 |
Recommended next
CyberPower CPS1215RMS Surge Protector, 120V/15A, 12 Outlets, 15 ft Power Cord, 1U Rackmount
The CyberPower CPS1215RMS is a 1U rackmount surge protector with 12 NEMA 5-15R outlets (front and rear) and a 15 ft power cord, built for network racks, data closets, and home office setups that need flexible plug access. It’s commonly chosen for its solid metal housing, low-profile rack fit, and practical outlet layout, with the main tradeoff being that it’s not a smart PDU and surge performance cannot be “proven” after installation.
1U 12V 20A 18-Channel Rack Mount Power Supply – 12V
A 1U rack-mount DC power distribution unit designed for CCTV, security cameras, and similar 12V setups. It provides 18 fused 12V outputs with front-panel status lighting and safety features like PTC reset protection plus surge and lightning protection, with a key wiring convenience benefit: rear-facing connections.
Yuarise 9 Channel/Port DC 12V 10 Amp Security Camera Power Supply Distribution (Metal Box, 9 Outputs)
A compact 9-output DC 12V power distribution box for CCTV, IP cameras, and DVR setups that want per-channel protection. It offers a total 10A max (up to 1A per channel) with independent fuses and LED indicators, but you need to confirm your cameras’ current draw so the total load fits within spec.
TRENDnet 6-Outlet Managed PDU, TPI-06, Rackmount Power Distribution Unit, UL review
The TRENDnet TPI-06 is a network-manageable, rackmount PDU with six controllable NEMA 5-15R outlets plus one bypass outlet, built for remote power control and per-outlet monitoring. It’s a strong fit for small server closets, labs, and home networking setups that benefit from scheduled power and email alerts, with the main caveat that managed features require using TRENDnet Hive.