Yuarise 9 Channel/Port DC 12V 10 Amp Security Camera Power Supply Distribution (Metal Box, 9 Outputs)
Quick take
The Yuarise 9-channel DC 12V security camera power distribution box is built for multi-camera CCTV and IP setups that benefit from per-port protection. It supports up to 9 cameras with independent fuses and LED indicators per output, but it is capped at a total 10A and up to 1A per channel, so your camera current draw needs to fit the load budget.
Pros and cons
Pros
- 9 DC 12V output pairs for multi-camera systems
- Independent fuses and LED indicators per channel for localized fault isolation
- Total max output is 10A, with a stated limit of 1A per channel
- Includes a metal box form factor for organizing a small surveillance power hub
Cons
- No wall power cord included, you must use the correct AC-to-12V input setup
- Voltage can be fine-tuned, but improper adjustment could affect camera stability
- Buyer reports suggest power capacity can be a limiting factor for higher-draw cameras, especially when all ports are fully loaded
What buyers think
Buyer-review evidence for this power distribution box is generally positive for basic functionality and convenience. Several reviews describe the unit as working reliably for existing CCTV systems and highlight the value of having an on/off switch and fuses per channel, which can reduce the impact of a problem on one camera port. There is also appreciation for independent channel protection as a practical design choice for surveillance builds.
That said, review detail also includes some concerns when systems are pushed near the power limits. In particular, at least one review indicates that not all cameras remained powered when many ports were in use, suggesting it is important to verify the camera power requirements against the device’s total 10A ceiling and per-channel current limits.
What this is for (and what it is not)
This is a DC 12V power distribution box designed to split one 12V supply into multiple camera outputs (9 channels/outputs). It is a fit when you want cleaner cable management for a DVR/NVR-based security setup and want per-port fusing so one problem port does not necessarily take down the rest.
It is not a universal power adapter for unknown voltage systems. The unit expects DC 12V operation and is intended for camera loads within its stated current capability. Also note that it does not include a power supply cord to plug into the wall, so you will need the appropriate input wiring or AC power source compatible with the unit’s AC input range.
Key specs that affect real-world compatibility
Power limits: total 10A, up to 1A per channel
The most important buying detail is how current is allocated. The unit is rated for a maximum total output of 10A, with a maximum of 1A per channel. If your cameras draw more than the per-channel limit, or if multiple cameras together exceed the total 10A budget, you can run into partial operation.
Per-channel fuse and LED indicator
Each output has an independent fuse and an LED indicator. The red LED indicator is intended to help you quickly identify when an individual camera output is not functioning, and the design goal is that one affected port should not shut down the rest of the outputs.
Input voltage range and power adjustment
The input is specified as 110V to 240V AC, and the output is DC 12V. The box also includes a voltage fine-tuning feature (a yellow adjustment button) to dial in the output voltage. This can be helpful for setups that need a tighter voltage target for stable camera operation, but it adds another step to get right during installation.
Pros and cons in plain terms
Where it shines
- Multi-camera organization: Nine DC outputs make it straightforward to power a larger camera lineup from one place.
- Localized protection: Independent fuses and per-port LEDs are useful when you want troubleshooting to be faster and failures to be contained.
- Suitable for typical 12V CCTV loads: The combination of 12V output and per-channel limits aligns well with many standard CCTV camera power requirements.
Where you need to double-check
- Power budget matters: If you have higher-draw cameras (for example, models with more demanding night-view or IR performance), verify their current draw so you do not exceed the 10A total or the 1A per-channel cap.
- Installation details: The unit does not include a wall power cord, so plan your AC input connection accordingly.
- Voltage tuning: If you adjust output voltage, confirm you are landing within the recommended 12V operating range for your cameras.
Who should buy it
- You are building or upgrading a 9-camera (or fewer) 12V CCTV/IP surveillance system.
- You want per-channel fusing and a quick way to spot which output might be failing.
- You prefer a centralized, metal-box style power distribution layout.
Who should skip it
- Your cameras consistently require more than 1A on a single port, or the combined total will push beyond 10A when fully populated.
- You do not want to handle installation wiring details (since no wall power cord is included).
- You are not comfortable verifying camera current ratings and planning around total load.
Verdict
The Yuarise 9-channel DC 12V 10A power distribution box is a practical option for many multi-camera 12V security setups, especially if you value independent port protection and easier troubleshooting. The biggest “make or break” factor is power compatibility. If your cameras’ current draw fits within the total 10A and per-channel 1A limits, this can be a clean, organized way to power your system. If you plan to run demanding cameras on every output, you may need to size up your power approach before buying.
Want to see the most up-to-date pricing and availability? Buy on Amazon
FAQ
How many cameras can this power?
It supports up to 9 cameras via its 9 output channels, but the actual number you can run reliably depends on each camera’s power draw and whether the total current stays within the unit’s maximum output limits.
What is the maximum current this power supply distribution can deliver?
The maximum total output is 10A, with a maximum of 1A per channel (port). If cameras require more than the per-channel limit or the combined load exceeds 10A, you may see ports fail to power.
Does it include a wall power cord?
No. It includes the 9-port power distribution box, but you will need to provide the appropriate AC-to-input connection, since a wall power cord is not included.
Are the fuses independent for each output?
Yes. Each output has its own fuse and LED indicator, which is intended to localize a problem to a single channel rather than shutting down every port.
Can I adjust the output voltage?
Yes, the unit includes a fine-tuning adjustment (a yellow button) to set the output voltage. Use this feature carefully to match your cameras’ recommended operating voltage.
Will it work for any DC 12V camera?
It is designed for DC 12V camera loads. Before installation, confirm voltage compatibility and check camera current draw so your system stays within the device’s total 10A and 1A-per-channel limits.
Specifications
| Product Title | Yuarise 9 Channel/Port DC 12V 10 Amp Security Camera Power Supply Distribution with Metal Box for Security Cameras, IP Cameras, CCTV DVR Surveillance System, 9CH 10A |
|---|---|
| Category | Electronics > Power Accessories > PDUs |
| Brand | Yuarisx |
| Manufacturer | Yuarisx |
| Model Name | 02001 |
| Model Number | 02001 |
| Item Weight | 1.28 Kilograms |
| Compatible Devices | Camera |
| Connector Type Used on Cable | DC Power Connectors |
| Output Wattage | 120 Watts |
| Form Factor | External Power Supply Box |
| Wattage | 100 watts |
| Cooling Method | Air |
| Power Supply Design | External |
| Connector Quantity | 9 |
| Current Rating | 9 Amps |
| Maximum Input Voltage | 240 Volts |
| Minimum Input Voltage | 110 Volts |
| UPC | 702103336733 |
| Mfr Part Number | 02001 |
| Connector Type | DC Power Connectors |
Available variants
Size
- 18CH 20A
- 9CH 10A
Recommended next
CyberPower CPS1215RMS Surge Protector, 120V/15A, 12 Outlets, 15 ft Power Cord, 1U Rackmount
The CyberPower CPS1215RMS is a 1U rackmount surge protector with 12 NEMA 5-15R outlets (front and rear) and a 15 ft power cord, built for network racks, data closets, and home office setups that need flexible plug access. It’s commonly chosen for its solid metal housing, low-profile rack fit, and practical outlet layout, with the main tradeoff being that it’s not a smart PDU and surge performance cannot be “proven” after installation.
CyberPower PDU24001 Metered ATS PDU, 100-120V, 15A (Derated to 12A), 10 Outlets, 1U Rackmount
The CyberPower PDU24001 is a 1U, network-manageable metered ATS PDU built for racks that need power redundancy. It uses dual NEMA 5-15P inputs (A and B) with automatic transfer switching plus a color-selectable LCD for live power metrics, with a switch-free design to help prevent accidental shutdowns. The main catch is fit and compatibility, including true sine wave input requirements and a 100-120V, 15A rating that is derated to 12A.
Progressive Dynamics PROG Dynamic PD4560AV Inteli-Power 4500 Series All-in-One AC/DC Distribution Panel - 50 Amp
The Progressive Dynamics PROG Dynamic PD4560AV is a 50 amp all-in-one AC/DC distribution panel designed for RV and similar 12V systems, featuring front-access to the converter/charger section, LED indicators for blown fuses, and multiple branch fuse holders. It’s a strong fit for buyers replacing an older panel, but the main breaker and some wiring hardware are not included, so planning the installation details matters.
CyberPower PDU41001 Switched PDU, 100-120V/15A (Derated to 12A), 8 Outlets, 1U Rackmount
The CyberPower PDU41001 is a 1U, rackmount switched PDU that adds network control (local and remote) for 8 NEMA 5-15R outlets plus an LCD for at-a-glance electrical readings. It’s designed for people who want to power-cycle devices from anywhere and monitor PDU vitals, with the main tradeoff being an input current limit that’s derated to 12A in practice.