CyberPower PDU41001 Switched PDU, 100-120V/15A (Derated to 12A), 8 Outlets, 1U Rackmount
Quick take
The CyberPower PDU41001 is a 1U rackmount switched PDU that gives you network-controlled power for 8 NEMA 5-15R outlets, plus an onboard LCD and remote monitoring. It’s a practical fit for home labs and small server racks where you want to power-cycle equipment and see real-time electrical readings. The main caveat is the derated input current (100-120V/15A derated to 12A), so you will want to account for total load before buying.
Pros and cons
Pros
- 8 switched NEMA 5-15R outlets with individual or grouped control
- Local and remote management via network interface, plus an LCD that shows electrical conditions
- Event notifications for power events (email, SMS, or SNMP traps)
- 1U rackmount metal housing with upgradeable firmware
Cons
- Input is specified as 15A but derated to 12A, which can limit the total draw across all outlets
- Some advanced outlet “cascading” use may require workarounds if software behavior isn’t as expected
What buyers think
Buyer feedback is generally strong around setup and day-to-day usability. Many users describe configuration as straightforward, and remote control as reliable once the unit is connected to the network. There is also frequent appreciation for the LCD and the visibility into power consumption, since it helps remove guesswork when managing multiple devices. A smaller amount of feedback points to occasional quirks with more complex outlet features (notably cascading), but users indicate it can be worked around. Overall, buyer-review evidence suggests this PDU is a dependable choice for remote power cycling and monitoring in rack and rack-adjacent setups, with the biggest “buyer responsibility” being load planning.
Who this PDU is for
The CyberPower PDU41001 is best for anyone who needs more than a basic power strip, specifically when you want:
- Remote power control for multiple devices, such as network appliances, lab servers, or small IT setups.
- At-a-glance and logged electrical information using the built-in multifunction LCD and remote monitoring.
- Power-event alerts so you can respond quickly if something changes.
Good fit
- Home labs or small racks where a 1U footprint matters
- Users who need to power-cycle equipment from outside the room or site
- Teams that prefer monitoring and notifications instead of relying on manual checks
Not the best fit
- If you expect to run a high total wattage across all connected devices, the derated 12A limit means you must add up your load carefully.
- If your deployment depends heavily on advanced multi-unit outlet cascading workflows, you may want to verify that your intended configuration matches how the system behaves in practice.
Key features that matter in real use
Switched control for 8 outlets
Each of the 8 outlets is switched, letting you control individual devices or power up/down multiple outlets together. That is especially helpful when equipment should be restarted in a particular sequence or when you want targeted resets instead of shutting everything off.
LCD monitoring plus network visibility
The multifunction LCD displays PDU conditions, including amperage, voltage, and power (KW), and the unit can show additional operational details such as network information (for example, IP address). In practice, this reduces “where is the problem” troubleshooting time because you can validate whether the PDU is measuring expected conditions while you manage devices.
Remote management and notifications
Management is available both locally and remotely through a network interface (RJ45 Ethernet), using web and console-based options. It also supports automatic event notifications via email, SMS, and SNMP traps, which is useful when you need alerts without staying logged into a dashboard all day.
Rackmount build and firmware updates
The PDU is designed for a 1U rack space with a durable metal housing. Firmware updates are supported, which matters for staying current with improvements to the management experience and features over time.
Pros and cons, summarized
Buy it if you want a switched, network-controllable 1U PDU with enough outlets (8) for common lab and small rack use, and you value visibility into amperage, voltage, and power alongside remote power cycling.
Skip it or shop carefully if your installation is likely to exceed the derated 12A input capacity, or if your power strategy relies on complex cascading setups where software behavior may not match expectations in every scenario.
Price and availability
Pricing can vary by listing, and current availability may fluctuate. If you are comparing with other PDUs, focus less on the headline price and more on whether the total outlet count, switch control needs, and monitoring features match your setup. Check the latest price before deciding.
Alternatives to consider (by buying criteria)
Since no specific competitor models were provided, here are practical comparison points to guide your search:
- More outlets vs. rack space: If 8 switched outlets is not enough, look for a higher-outlet 1U or 2U switched PDU.
- Management style: If you need deeper integration with your monitoring stack, prioritize models that support SNMP and robust event alerting.
- Total load requirements: Compare the input rating and any derating rules, then calculate expected total draw across your outlets.
- Setup complexity: If you have limited time for configuration, choose units that emphasize straightforward web setup and reliable network behavior.
FAQ
Is the cyberpower PDU41001 switched or always-on?
It is a switched PDU. The 8 outlets are controllable individually or together, which lets you power-cycle connected equipment without removing power cables.
Does it support remote monitoring and alerts?
Yes. It supports remote monitoring and can send automatic notifications about power events via email, SMS, and SNMP traps (in addition to local monitoring through its LCD).
What’s the input power limit for connected devices?
It is specified for 100-120V service and listed as 15A, but it is derated to 12A. You should total your expected load across all outlets to ensure you stay within the derated limit.
How is the PDU controlled on the network?
It connects over Ethernet (RJ45) and supports management through network-based options, along with local control using the LCD.
Is it suitable for a 1U rack?
Yes. It is designed as a 1U rackmount unit with a durable metal housing.
Does it support firmware updates?
Yes. Firmware is upgradeable, allowing updates to programs that run the PDU.
Specifications
| Product Title | CyberPower PDU41001 Switched PDU, 100-120V/15A (Derated to 12A), 8 Outlets, 1U Rackmount |
|---|---|
| Category | Electronics > Power Accessories > PDUs |
| Brand | CyberPower |
| Manufacturer | CYBERPOWER SYSTEMS |
| Model Number | PDU41001 |
| Color | Black |
| Item Weight | 5.7 Pounds |
| Number of Outlets | 8 |
| Voltage | 120 Volts |
| Other Special Features of the Product | Mountable |
| Maximum Current | 15 Amps |
| Power Plug Type | Type B - 3 pin (North American) |
| Plug Type | Type B |
| Number of Ports | 8 |
| Compatible Devices | -- Other -- |
| Amperage | 15 Amps |
| Item Dimensions L x W | 17.05"L x 4.41"W |
| Shape | Rectangle |
| Recommended Uses For Product | Cabinet |
| EU Spare Part Availability Duration | 3 Years |
| UPC | 649532614073 |
| Global Trade Identification Number | 00649532614073 |
| Mfr Part Number | PDU41001 |
| Item Type Name | CyberPower PDU41001 Switched PDU, 120V/15A, 8 Outlets (5-15R), 12 ft. Cord (5-15P), 1U Rackmount |
| Built-In Media | PDU^(4) Mounting Brackets 2 short and 2 long^(10) Flat Head M4x8 Bracket Mounting Screws^Cord Retention Tray^(10) Cable Ties^(6) M3x6 Cord Retention Tray Mounting Screws^(6) M5x12 Screws^(6) Washers^RJ45/DB9 Serial Port Connection Cable^User Manual^ Registration Card^CD |
| External Testing Certification | UL, FCC |
| Warranty Description | Three-year limited warranty |
Available variants
Style
- 120V/20A
- 120V/15A,
Pattern Name
- Switched PDU
Recommended next
CyberPower CPS1215RMS Surge Protector, 120V/15A, 12 Outlets, 15 ft Power Cord, 1U Rackmount
The CyberPower CPS1215RMS is a 1U rackmount surge protector with 12 NEMA 5-15R outlets (front and rear) and a 15 ft power cord, built for network racks, data closets, and home office setups that need flexible plug access. It’s commonly chosen for its solid metal housing, low-profile rack fit, and practical outlet layout, with the main tradeoff being that it’s not a smart PDU and surge performance cannot be “proven” after installation.
TRENDnet 6-Outlet Managed PDU, TPI-06, Rackmount Power Distribution Unit, UL review
The TRENDnet TPI-06 is a network-manageable, rackmount PDU with six controllable NEMA 5-15R outlets plus one bypass outlet, built for remote power control and per-outlet monitoring. It’s a strong fit for small server closets, labs, and home networking setups that benefit from scheduled power and email alerts, with the main caveat that managed features require using TRENDnet Hive.
Furman M-8Dx Merit X Series 8 Outlet Power Conditioner & Surge Protector with LED Voltmeter & Dual Lights Plus Hosa 18 Gauge Electrical Extension Cable
The Furman M-8Dx is a rack-mount power conditioner and surge protector built for audio and AV setups that want cleaner power and switched outlet control. It adds a digital LED voltmeter (60 to 150 VAC), AC noise filtering to help reduce RFI and EMI, and bright red rack illumination with dimmer control.
18 Output 29 Amp 12V DC CCTV Distributed Power Supply Box for Security Camera, UL Listed
This 18-output 12V DC CCTV distributed power supply is designed for installations that need multiple camera runs from one centralized box. With regulated power, individual fuse protection per channel, and a manually adjustable voltage range (12V to 13.7V), it’s a solid fit for powering 12V security cameras, including IR night vision, but it is sized for 12V DC systems and requires careful total current planning across all cameras.