Evertech Power Box 18 Ch Channel 12V DC 10 A Power Supply Distribution Box
Quick take
The Evertech Power Box distributes 12V DC power across up to 18 channels for CCTV cameras, DVRs, and other 12V devices, with individual PTC resettable fuses and per-channel protection. Buyers like how it keeps installations cleaner than using many separate adapters, but the main buying caveat is ensuring your cameras and their actual wattage fit the unit’s total current capacity, especially if you plan to use many channels at once.
Pros and cons
Pros
- 18-channel 12V DC distribution with individual PTC resettable fuses per output channel
- Clear safety-oriented design, including short-circuit protection and over-current protection
- Metal enclosure with a key lock for reduced risk of unauthorized access
- Wall-mounting support, plus LED indicators for AC (red) and DC (green)
Cons
- Wiring space inside the box can feel tight when routing many cables for all channels
- To avoid overload, you may need to verify each camera’s power draw rather than assuming all channels can run at maximum load
- It is a 12V DC power distribution unit, so it will not work for setups that require other voltages
What buyers think
Buyer-review themes are largely consistent around practicality and stability. Many users describe the unit as effective for replacing a dead or inadequate power supply, and they report that cameras run reliably once connected. Reviewers also frequently call out the benefit of consolidating power into one enclosure, reducing the need for multiple adapters and making the system look more organized. The main recurring friction point is physical cable management, since the enclosure can be tight for routing and tucking in up to 18 cables. Finally, there is limited but notable feedback urging buyers to double-check total power requirements, since running all channels at high draw may push the usable capacity.
How the Evertech power box is set up
This is an external-style, 12V DC distribution box built for CCTV-style systems. Power comes in via an AC IEC input, then distributes low-voltage 12V DC to individual outputs using terminal blocks marked positive (+) and negative (-). Each DC channel has its own PTC resettable fuse and LED indication, so you can quickly see whether the box is receiving AC and outputting DC.
Safety and protection features
Key protection features include short-circuit protection and over-current protection. Each output channel uses a PTC (resettable) fuse, which is intended to limit faults on that specific channel rather than leaving the whole system down. The metal enclosure also includes a key lock for added physical security.
Key specs that affect real-world use
- Channels: 18 independent 12V DC output channels
- Input: AC 100-240V, 50/60 Hz
- Output: 12V DC (rated for up to 10A max total output current)
- Fuse rating: 1.1A per channel (PTC resettable fuses)
- Power adjustment: a voltage adjust trimmer from 12V to 15V
Who it’s best for
This power distribution box is a good fit if you want a single centralized 12V DC supply for a multi-camera setup, with per-channel protection and a locked enclosure. It is especially appealing when you are tired of managing many separate power adapters, and you want a cleaner wiring approach for camera and DVR systems or 12V LED lighting that matches the voltage requirements.
Who should avoid it
Avoid it if your devices do not run on 12V DC, or if your planned camera wattage per channel and total system current are uncertain. Because the box must stay within its total current capability, buyers who have high-draw cameras across many channels at once should calculate the total load carefully before committing.
Pros and cons, in plain terms
Pros you will likely notice
- Neater installations: consolidates multiple camera power feeds into one controlled enclosure.
- Per-channel protection: individual PTC fuses provide localized fault resistance at the output level.
- Helpful indicators and enclosure security: AC red and DC green indicators plus key lock help with troubleshooting and access control.
Tradeoffs to plan around
- Cable routing space: some users report the interior can be tight for 18 cables, so plan your cable length and routing.
- Power budgeting matters: if you intend to use many channels simultaneously, confirm each camera’s actual power draw so you do not operate beyond what the unit can supply comfortably.
Is the evertech power box 18 ch channel 12V DC 10 a worth it?
It tends to make sense for buyers who want a straightforward 12V DC CCTV-style distribution box, prefer a locked metal enclosure, and value per-channel resettable protection to reduce the impact of a channel-level fault. If you are going to use most or all channels, the biggest deciding factor is whether your cameras and their wattage fit within the box’s total output current. If you cannot estimate power draw, you may be better off choosing a distribution option that more clearly aligns with your expected load.
View latest price on Amazon: Buy on Amazon
FAQ
Can I use this power box for CCTV cameras and a DVR?Yes. It is designed to distribute 12V DC power for CCTV security equipment such as cameras and DVRs, as long as your devices use 12V DC.
Does it have fuses per channel?Yes. Each output channel uses a PTC resettable fuse, with an LED indication for each DC output.
What does the AC and DC indicator mean?The box includes an LED indicator for AC input (red) and DC output (green), which helps confirm power is present and the unit is actively supplying 12V DC.
Is 18 channels always usable at full load?You should budget power based on your cameras’ actual wattage and the box’s total current capacity. Using all channels does not guarantee that every device can run at maximum consumption at once.
Will it work outdoors?The enclosure is for mounted installations, but you should install it in a location protected from moisture and direct sunlight, consistent with typical camera power box placement.
FAQs
- Can I use this power box for CCTV cameras and a DVR?Yes. It is designed to distribute 12V DC power for CCTV security equipment such as cameras and DVRs, as long as your devices use 12V DC.
- Does it have fuses per channel?Yes. Each output channel uses a PTC resettable fuse, with an LED indication for each DC output.
- What does the AC and DC indicator mean?The box includes an LED indicator for AC input (red) and DC output (green), which helps confirm power is present and the unit is actively supplying 12V DC.
- Is 18 channels always usable at full load?You should budget power based on your cameras’ actual wattage and the box’s total current capacity. Using all channels does not guarantee that every device can run at maximum consumption at once.
- Will it work outdoors?The enclosure is for mounted installations, but you should install it in a location protected from moisture and direct sunlight, consistent with typical camera power box placement.
Specifications
| Product Title | Evertech Power Box 18 Ch Channel 12V DC 10 A Power Supply Distribution Box for CCTV DVR Security Camera LED Lights |
|---|---|
| Category | Electronics > Power Accessories > PDUs |
| Brand | Evertech |
| Manufacturer | EVERTECH |
| Model Name | EV-PB18-10P |
| Model Number | EV-PB18-10PL Big Size Box |
| Compatible Devices | Camera |
| Connector Type Used on Cable | DC power connector |
| Output Wattage | 120 Watts |
| Form Factor | Large |
| Wattage | 120 watts |
| Cooling Method | Air |
| Power Supply Design | External |
| Current Rating | 4 Amps |
| Maximum Input Voltage | 240 Volts |
| Minimum Input Voltage | 100 Volts |
| UPC | 609728880255 |
| Mfr Part Number | EV-PB18-10PL Big Size Box |
| Warranty Description | 1 Year |
| Item Type Name | power supply distribution box |
| Unit Count | 1.0 Count |
| Connector Type | DC power connector |
Recommended next
Real HD 18 Port 20 Amp High Power Security CCTV Camera Access Control Power Distribution Box (12V DC, PTC Protected)
A metal, key-locked 12V DC power distribution box designed to run up to 18 security cameras using individual PTC auto-reset protection per port. It’s an option if you want a centralized power panel for CCTV, access control, or similar 12V DC devices, with a main caveat being that each port is limited to 1A and the included short DC male pigtails may not suit all wiring setups.
CyberPower CPS1215RMS Surge Protector, 120V/15A, 12 Outlets, 15 ft Power Cord, 1U Rackmount
The CyberPower CPS1215RMS is a 1U rackmount surge protector with 12 NEMA 5-15R outlets (front and rear) and a 15 ft power cord, built for network racks, data closets, and home office setups that need flexible plug access. It’s commonly chosen for its solid metal housing, low-profile rack fit, and practical outlet layout, with the main tradeoff being that it’s not a smart PDU and surge performance cannot be “proven” after installation.
9 Channel/Port 10 AMPS, 12V DC Power Supply Box, Individually review
A lockable 12V DC power supply box with 9 output channels (including a DVR port) and individual fusing for multi-device CCTV or LED setups. Buyers like how it centralizes power and helps keep systems stable, but wiring setup matters, and one failure report suggests power cord and connection quality are worth checking.
Tripp Lite Metered PDU, 20A Dual Circuit, 32 Outlets (5-15/20R), 120V, L5-20P/5-20P, 10 ft. Cord, 0U Vertical Rack-Mount Power (PDUMV40)
The Tripp Lite PDUMV40 is a 0U vertical, dual-circuit metered PDU built for rack setups that need clear power budgeting. With 32 NEMA 5-15/20R outlets split across two independent 20A circuits and separate current readouts, it’s designed to simplify load balancing for redundant power systems. The main tradeoff is cost and that metering only helps if you plan your rack power layout around the two circuits.