9 Channel/Port 10 AMPS, 12V DC Power Supply Box, Individually Fused for CCTV, LED, and All 12v DC Devices
Quick take
This 9-channel 12V DC power supply box is built for centralized powering of multi-camera CCTV and other 12V devices, with a separate fused output per channel to help limit how far a single-line issue spreads. It can simplify cabling and reduce instability versus using separate power adapters, but it requires careful wiring because setup choices directly affect performance and which devices it can support.
Pros and cons
Pros
- Individually fused outputs, designed to prevent one affected line from taking down the whole system.
- Centralizes power for a multi-device 12V DC setup (9 channels including a dedicated DVR port).
- Lockable metal enclosure, aimed at protecting internal components for indoor installs.
- Includes a screwdriver plus extra fuses for initial setup and basic maintenance.
Cons
- Review evidence suggests correct connections and installation technique matter, especially for first-timers.
- Some setups may require additional DC pigtails or compatible wiring that is not always included for every camera model.
- One report points to a defective power cord or socket issue, so it is smart to verify the power connection on arrival.
What buyers think
Buyer-review evidence is mixed but generally points to a few recurring themes. Many buyers describe improved stability and a cleaner, centralized way to power multiple cameras compared to using separate power packs. Several reviews mention the unit running long cable runs successfully for cameras, with the enclosure and overall setup feeling practical for installations. On the other hand, installation quality and connection technique come up in feedback, and a small number of buyers report power-cord or socket problems that made the unit a poor value until addressed. There is also limited but relevant feedback that the box may still require additional wiring components (like pigtails) depending on the camera system.
How this 9-channel 12V power supply works
This power box is designed to take one main DC input and distribute 12V DC power across multiple outputs. It includes a dedicated channel for a DVR, with additional channels intended for cameras and other 12V DC devices. The key feature for reliability is that each output channel is individually fused, so an issue on one line is less likely to disrupt power to everything else.
Power capacity and how to avoid overloading
The unit is rated as a 10A 12V DC power supply and is described as supporting up to 18 cameras in at least one detailed buyer breakdown, with current divided across outputs when more devices are used. In practical terms, you should plan based on how many devices you will actually connect and what current each device needs. If you load every available output, the available current per device drops compared with a partially used setup. This is not only about whether the system “turns on,” but also whether devices that rely on stable current (for example, cameras with infrared functions) operate consistently.
Installation considerations (where buyers win or struggle)
1) Wiring and connections
Several reviews emphasize that installation technique matters. If you are new to powering CCTV systems, take your time with wiring, insulation, and connection fit. Poorly seated connections or rushed assembly can create instability or cause failures that look like “the power box is bad,” when the real culprit is the connection.
2) Device plugs and cables
Some buyers report needing additional DC pigtails or specific connector wiring to fit their cameras, because the box may not include the exact ends you need for every camera model. Before buying, confirm your cameras and DVR use compatible 12V DC connections, and verify what cabling or pigtails you already have on hand.
3) Enclosure and security
The lockable metal enclosure is intended to protect internal components from tampering and everyday damage. That makes it a better match for installations where the power distribution box will be visible and you want a more professional, protected setup than an open power brick.
Pros and cons in plain terms
- Good fit for: homeowners and small installers who want one centralized 12V DC distribution point for a multi-camera CCTV system or mixed 12V devices (like certain LED setups), and who are comfortable doing careful wiring.
- Better when you have multiple devices: the value increases as you reduce the number of separate adapters you would otherwise use.
- Potential drawbacks: if you need exact camera-side connectors that are not included, plan for additional wiring parts. Also, power delivery quality depends on correct connections.
- Power quality check on arrival: because one review reports a cord or socket failure after a period of use, it is reasonable to inspect the power cord seating and look for any physical issues when you set it up.
Who should buy this power supply box
Consider it if you are building or upgrading a multi-camera 12V DC system and want individually fused channels to improve resilience. It also makes sense if you have a mix of 12V devices and want a single, organized power distribution approach in a lockable enclosure.
Who should skip it
Skip it if you only need power for one or two devices, because separate compact adapters may be simpler. Also, if you are not comfortable with wiring tasks or cannot source compatible 12V DC connector pigtails for your specific cameras, you may find the setup more frustrating than using a plug-and-play adapter for each device.
Alternatives to consider
If you are comparing options in the “12V DC power distribution” category, the main differences usually come down to (1) number of channels, (2) whether outputs are individually fused, (3) input and output connection type, and (4) build quality and enclosure. Look for a power box that matches your number of cameras, offers the same type of protective fusing, and has connector compatibility with your DVR and camera wiring needs. For very small systems, a simpler multi-output adapter might reduce wiring complexity.
Price and availability
This model is typically listed as a budget-to-midrange option for centralized 12V power distribution, with a current Amazon listing available. If you are sensitive to total cost, compare the price against what you would spend on separate adapters and any additional pigtails or fuses you might need.
Verdict
The 9-channel individually fused 12V power supply box is a practical choice for multi-camera CCTV and other 12V DC projects when you want centralized power, organized cabling, and per-line protection. The biggest success factor is careful installation and connector compatibility, and buyer feedback suggests you may need extra wiring components for certain camera models. If that fits your build, it can be a clean upgrade from scattered power bricks.
FAQs
Can this power box run a DVR and multiple cameras? Yes, it is designed with a dedicated DVR output channel plus additional channels intended for cameras and other 12V DC devices.
Does it have individual fusing for each output? Yes, each channel is individually fused, which is meant to help limit the impact of a fault on one line.
How do I know if I have enough power for my cameras? Plan your camera count and total current needs for a 12V system. As you use more outputs, available current per device decreases, so match your device requirements to the box’s total 10A 12V capacity.
Will I need extra cables or pigtails? Some installations may require additional DC pigtails or connector wiring to match your camera leads. Check connector compatibility before installing.
Is this easy to install for beginners? Reviews suggest correct connections are important. If you are careful and follow good wiring practices, many buyers find the setup manageable, but first-timers should expect a learning curve.
Specifications
| Product Title | 9 Channel/Port 10 AMPS, 12V DC Power Supply Box, Individually Fused for CCTV, LED, and All 12v DC Devices. Includes Screw Drivers & Extra fuses |
|---|---|
| Category | Electronics > Power Accessories > PDUs |
| Brand | ARES VISION |
| Manufacturer | Ares Technology Group |
| Model Name | 4bf3f13c-74dd-4360-b715-79263496a000 |
| Model Number | ARPOW9 |
| Compatible Devices | Camera |
| Connector Type Used on Cable | ATX |
| Output Wattage | 360 Watts |
| Wattage | 120 watts |
| Cooling Method | Air |
| Connector Quantity | 1 |
| Maximum Input Voltage | 110 Volts (DC) |
| Minimum Input Voltage | 100 Volts (DC) |
| Item Dimensions | 9.25 x 8.07 x 2.13 inches |
| UPC | 689727517222 |
| Mfr Part Number | ARPOW |
| Connector Type | ATX |
| Item dimensions L x W x H | 9.25 x 8.07 x 2.13 inches |
| Number of Connectors | 1 |
Available variants
Size
- 18CH / 30 AMP
- 18CH / 20 AMP
- 9CH / 10 AMP
- 4CH / 5 AMP
Recommended next
CyberPower CPS1215RMS Surge Protector, 120V/15A, 12 Outlets, 15 ft Power Cord, 1U Rackmount
The CyberPower CPS1215RMS is a 1U rackmount surge protector with 12 NEMA 5-15R outlets (front and rear) and a 15 ft power cord, built for network racks, data closets, and home office setups that need flexible plug access. It’s commonly chosen for its solid metal housing, low-profile rack fit, and practical outlet layout, with the main tradeoff being that it’s not a smart PDU and surge performance cannot be “proven” after installation.
EVERSECU 18 Channel DC12V 20 Amp Reset Fuse CCTV DC Distributed Power Box with AC Plug and Lock
The EVERSECU 18-channel DC12V power distribution box is built for wiring multiple 12V security devices from a single AC input, with per-output PTC reset fuses and protection features. It’s a strong fit for anyone replacing a tangle of separate transformers, but buyers should confirm their 12V total load stays within the unit’s 20A output limit and that each device can be powered from DC12V.
WFCO WF-8930/50NPB-50 50 Amp or 30 Amp AC Distribution Center
WFCO WF-8930/50NPB-50 is an RV AC distribution center that combines a 120/240V 30/50A breaker panel with a DC fuse board in one unit. It offers up to 12 AC branch circuits and up to 15 DC circuits, with a door window, status indicator lights, and an install-focused design with a snap-in 12V fuse board for cleaner wiring.
TRENDnet 6-Outlet Managed PDU, TPI-06, Rackmount Power Distribution Unit, UL review
The TRENDnet TPI-06 is a network-manageable, rackmount PDU with six controllable NEMA 5-15R outlets plus one bypass outlet, built for remote power control and per-outlet monitoring. It’s a strong fit for small server closets, labs, and home networking setups that benefit from scheduled power and email alerts, with the main caveat that managed features require using TRENDnet Hive.