CyberPower PDU41003 Switched PDU, 100-120V, 30A (Derated to 24A), 16 Outlets, 2U Rackmount
Quick take
The CyberPower PDU41003 is a 2U rackmount switched PDU designed for 100-120V (listed as 125V) power distribution with 16 NEMA 5-20R outlets. It supports remote and local control of outlets through a web interface and RJ45 network connection, plus a multifunction LCD that displays metrics like amperage, voltage, power (kW), and network information. The main practical caveat is the fixed 12 ft input cord, which can be harder to manage depending on where you mount it in your rack.
Pros and cons
Pros
- Remote switched outlet control for 16 outlets individually or as groups via network access (RJ45) and a browser-based management console.
- Front LCD provides immediate monitoring details, including amperage, voltage, kW, and IP address.
- 2U metal, mountable design suitable for server racks, with dedicated rack mounting hardware and cord retention components.
- Built-in capability to monitor power conditions and manage power without leaving the rack (local display control).
Cons
- Long fixed 12 ft L5-30P input cord can be awkward for cable management in tighter rack layouts.
- Output current is effectively derated (listed as 30A input derated to 24A), so power planning matters for high-load environments.
What buyers think
Buyer-review evidence is limited, but the feedback themes that do show up are straightforward. Setup and basic operation are described as working as expected for rack use, and the unit is viewed as sturdy and well-built. One recurring usability detail is that the 16 outlets are arranged as two outlet banks (useful to understand if your rack power scheme depends on grouping). The most commonly cited drawback is practical cable management, specifically the input cord length being longer than necessary for some placements.
Who this PDU is best for
- Server and IT racks that need per-outlet power control: If you regularly reboot, sequence startup, or manage individual devices, switched outlets can be a big operational upgrade over basic non-switched PDUs.
- Teams that want network visibility and control: The RJ45 Ethernet connection and web-based management console are aimed at centralized administration without walking to the rack.
- Buyers who value local monitoring too: The LCD is meant to show key operating details immediately, which helps during troubleshooting.
Key features that affect real-world use
16 switched outlets, manageable individually or in groups
You get 16 NEMA 5-20R receptacles and the ability to control them individually or collectively. That matters when you want to handle things like staged power-on routines or selective rebooting without shutting down the entire rack.
Network control plus local LCD monitoring
This PDU is built for both remote and on-site workflows. Over the network (via RJ45), you can use a management console through a web browser. On the device itself, the LCD displays detailed condition information, including amperage, voltage, kW, and IP address, so you can confirm what is happening without relying on a single external tool.
Power input, rack form factor, and physical build
It is a 2U rackmount unit using a NEMA L5-30P input with a 12 ft power cord. The enclosure is metal, and it is intended to be installed in standard racks with included mounting and cable management support (rack mounting hardware and cord retention components).
Pros and cons in plain terms
Pros
- Switching and monitoring are built-in, not an afterthought.
- Remote network control supports typical datacenter or lab workflows.
- Local display helps with quicker confirmation during outages or troubleshooting.
- 2U rackmount form factor is aligned with common server deployments.
Cons
- Cord length is a layout dependency. In some rack placements, 12 ft may create extra slack or cable routing complexity.
- Derating means you need to plan load carefully if you intend to push near maximum capacity.
Price and availability
The listed price for this model can vary, and availability may change frequently. Check the current listing for the latest cost and stock status before you plan your rack build.
What to compare before you buy
If you are evaluating switched rack PDUs, your biggest decision drivers are usually outlet type, total available amperage, and how you want to manage and monitor power. Use this checklist to make sure the PDU fits your rack and devices.
- Outlet compatibility: Confirm that your devices use NEMA 5-20R receptacles and that you are not expecting 5-15R or IEC outlets.
- Power capacity and derating: Plan based on derated available current, not just the input rating, especially if multiple devices will run heavy loads at the same time.
- Management needs: Decide whether you want network control, local display monitoring, or both.
- Physical installation: Think about where the L5-30P input will land relative to your UPS and rack distribution, since cord routing can be the difference between tidy and frustrating cable management.
Verdict
The CyberPower PDU41003 is a practical switched rack PDU for 100-120V environments where you want both network-based outlet control and an on-device LCD showing useful power and status details. It is best for server racks and IT setups that need controllable power distribution, but you should plan cable routing carefully because the 12 ft input cord can be longer than ideal for certain installations. If your rack layout and device outlet types match, it is a solid option to upgrade from basic non-switched power distribution.
FAQs
Is the CyberPower PDU41003 switched, or is it just a power distributor?
It is a switched PDU, with 16 NEMA 5-20R outlets that can be controlled individually or collectively.
Can I control the outlets over the network?
Yes. It connects via RJ45 Ethernet and supports control through a web browser using a management console, plus local control from the unit’s LCD.
What does the LCD display on this PDU?
The LCD shows power and condition information, including amperage, voltage, kW, and network-related details such as IP address.
What input plug and cord length does it use?
It uses a NEMA L5-30P straight plug input with a 12 ft power cord.
What’s the outlet rating and how should I think about capacity?
The unit is listed for 100-120V operation and a 30A maximum input, with derating noted (derated to 24A). You should plan outlet and total rack load accordingly.
Is it suitable for a standard 2U server rack?
Yes. It is a 2U rackmount metal PDU intended for installation in server racks.
Specifications
| Product Title | CyberPower PDU41003 Switched PDU, 100-120V, 30A (Derated to 24A), 16 Outlets, 2U Rackmount |
|---|---|
| Category | Electronics > Power Accessories > PDUs |
| Brand | CyberPower |
| Manufacturer | CYBERPOWER SYSTEMS |
| Model Number | PDU41003 |
| Color | Black |
| Item Weight | 7.3 Pounds |
| Number of Outlets | 16 |
| Voltage | 125 Volts |
| Other Special Features of the Product | Mountable |
| Maximum Current | 30 Amps |
| Power Plug Type | Type B - 3 pin (North American) |
| Plug Type | Type L |
| Number of Ports | 16 |
| Compatible Devices | -- Other -- |
| Smart Home Compatibility | Not Smart Home Compatible |
| Amperage | 30 Amps |
| Item Dimensions L x W | 4.41"L x 17.05"W |
| Shape | Rectangle |
| Enclosure Material | Metal |
| UPC | 649532614097 |
| Global Trade Identification Number | 00649532614097 |
| Mfr Part Number | PDU41003 |
| Item Type Name | CyberPower PDU41003 Switched PDU, 120V/30A, 16 Outlets (5-20R), 12 ft. Cord (L5-30P), 2U Rackmount |
| Built-In Media | PDU^(2) Mounting Brackets^(12) M4x8 Bracket Mounting Screws^(6) M5x12 Rack Mounting Screws and Washers^(2) Cord Retention Trays^(12) M3x6 Cord Retention Tray Screws^(24) Cable Ties^RJ45/DB9 Serial Port Connection Cable^User Manual^Registration Card^ Download Card |
| Warranty Description | Three-year limited warranty |
| Unit Count | 1.0 Count |
Available variants
Style
- PDU
Recommended next
Tripp Lite Metered PDU, 15A, 13 Outlets, 5-15R, 120V, 5-15P, 15 Ft. Cord (PDUMH15)
This 1U, rack-mount Tripp Lite metered PDU adds real-time local current monitoring (in Amps) so you can keep tighter control over load when expanding a rack or closet. It has 13 outlets (with a mix of rear-facing and one front-facing) and a switch-free design to help prevent accidental shutdowns, with a main caveat that the meter may not show meaningful readings with very light loads.
Metered-Surge Protection Power Distribution Unit, 240V, L6-30P Plug, 30A, 7200watts, (6) C13 & (2) C19 Outlets, Networking, Server Rack, Heavy Industry, Crypto Mining PDU
A rack-mountable, metered PDU with surge protection designed for 240V L6-30P setups. It combines an onboard voltage/current display with a mix of (6) C13 and (2) C19 outlets for flexible cabling, and buyers report stable 24/7 operation while using it with dedicated 30A power.
Real HD 18 Port 20 Amp High Power Security CCTV Camera Access Control Power Distribution Box (12V DC, PTC Protected)
A metal, key-locked 12V DC power distribution box designed to run up to 18 security cameras using individual PTC auto-reset protection per port. It’s an option if you want a centralized power panel for CCTV, access control, or similar 12V DC devices, with a main caveat being that each port is limited to 1A and the included short DC male pigtails may not suit all wiring setups.
9 Channel/Port 10 AMPS, 12V DC Power Supply Box, Individually review
A lockable 12V DC power supply box with 9 output channels (including a DVR port) and individual fusing for multi-device CCTV or LED setups. Buyers like how it centralizes power and helps keep systems stable, but wiring setup matters, and one failure report suggests power cord and connection quality are worth checking.