EVERSECU 9 Channel AC 24V 5 Amp Reset Fuse CCTV DC Distributed Power Box
Quick take
This 9-channel CCTV power distribution box converts an AC input (100-240VAC) to AC 24V and provides independent resettable PTC fuse protection per output. It is a practical choice for multi-camera installs where you want one fault to be isolated to a single channel, and many buyers like the fanless setup.
Pros and cons
Pros
- 9 independent AC 24V output channels with per-channel PTC resettable fuses and LED indicators for easier fault isolation.
- Multiple protections, including short protection (PTC reset), high-voltage/surge protection, and over-current self-protection.
- Lockable metal housing with AC plug included, designed for secure installations.
Cons
- One review suggests the actual output voltage may run high (reported around 29VAC), which can be a deal-breaker for cameras with strict voltage requirements.
- Channel-level current limit matters, with a maximum of 2A per channel and a total of 5A across all 9 outputs, so heavier loads may require planning.
- Buyer-review evidence is limited (only a small number of reviews), so patterns about long-term behavior and real-world voltage consistency are less certain.
What buyers think
Buyer-review evidence is limited, but the available feedback clusters around a few decision-relevant themes. Several buyers report it working as intended as a centralized 24V AC source for their security equipment. There is also at least one negative experience tied to output voltage being higher than expected, which caused camera shutdown for that setup. Overall, the reviews support that the box can be effective for multi-device power distribution, while also highlighting that output voltage compatibility is important for sensitive cameras.
Key features that matter for CCTV power distribution
9 channels with independent resettable PTC fuse protection
Each output channel uses a resettable PTC fuse with an LED indicator. In a fault condition, the affected channel is isolated while the remaining channels can continue running. After the problem clears, the PTC fuse is designed to automatically return to a closed state, which reduces downtime compared with replace-and-rewire approaches.
Protection modes for common power problems
Beyond per-channel PTC isolation, the unit includes additional safeguards intended for security installations:
- Short-circuit protection: when a short condition occurs, the relevant PTC fuse opens, then re-closes once the condition is removed.
- Over-current protection: if current draw is excessive, the supply switches into self-protection mode, then returns to normal operation after the condition is corrected.
- High-voltage protection: a surge protection path is used to help protect connected devices during voltage spikes.
Built for safe installs, with a lockable metal enclosure
The power box uses a reinforcement-style metal housing intended to handle real-world mounting environments. It also supports physical security, including a locking feature with keys, and it includes an AC plug for straightforward deployment.
Power specs you should sanity-check before buying
Input and output
- Input: 100-240VAC (50/60Hz compatible)
- Output: AC 24V (9 output channels)
Current limits across channels
- Total supply current: 5A
- Max per channel: 2A
This is the practical planning part. If several cameras or accessories pull close to their individual limits, you can exceed the total 5A budget even if each channel is below 2A. A simple way to avoid surprises is to add up each device’s expected current draw on the shared 24V AC rail and keep the totals within capacity.
Voltage consistency concerns
One recurring buying concern can be summed up as compatibility. A buyer reported an output voltage reading significantly above 24V AC, and that mismatch caused their cameras to shut down. If your cameras (or other connected security equipment) are sensitive to voltage, it is wise to confirm your system requirements, and if possible, plan a way to measure output under load once installed.
Setup and day-to-day usability
This type of security PDU is usually valued because it reduces messy wiring and concentrates distribution in one enclosure. The independent channel design also helps during troubleshooting because a problem should remain localized to the channel it affects, and the LED indicators give quick visual feedback.
Whether your environment is dusty or outdoors, fanless designs can reduce maintenance concerns, but as always, ensure the unit is installed with sensible airflow clearance if required in your environment.
Price and availability
The listing price can fluctuate, and stock levels may change. If you are comparing options, consider not just the cost of the box, but also whether it fits your exact device count and current draw so you do not need additional adapters or separate power supplies.
Who should buy it, and who should skip it
Best for
- Security camera setups that need centralized AC 24V distribution across multiple devices (up to 9 channels).
- Buyers who value fault isolation, because a channel-specific PTC fuse can limit how many cameras go down at once.
- Installations where fan noise or fan longevity is a concern (fanless behavior is a positive theme in reviews).
Who should skip it
- If you have high-current accessories that will push near the 2A per-channel or total 5A limits, you may need either a different distribution approach or a higher capacity unit.
Verdict
The EVERSECU 9-channel AC 24V reset-fuse power box is a strong fit for typical multi-camera CCTV and security builds that benefit from channel isolation and protection features. The biggest decision point is voltage compatibility. If your equipment tolerates AC 24V well, this is an organized, lockable solution with per-channel resettable protection. If your cameras are sensitive to voltage, it is worth validating output behavior before committing.
FAQ
Is this a fanless CCTV power distribution box?
Does one channel fault shut down all cameras?
The design uses independent PTC resettable fuses per output channel, so a fault on one channel is intended to affect only that channel while others remain working.
What is the maximum load per channel?
The unit is rated for up to 2A per channel, with a total output current budget of 5A across all channels.
Is the output voltage always exactly 24V AC?
If your devices are voltage-sensitive, verify compatibility.
What devices is it intended for?
It is intended for CCTV camera and related security equipment such as DVRs, PTZ devices, IR illuminators, and other 24V AC security loads.
Specifications
| Product Title | EVERSECU 9 Channel AC 24V 5 Amp Reset Fuse CCTV DC Distributed Power Box with AC Plug and Lock for Security Cameras, DVRs, CCTV Power Supply |
|---|---|
| Category | Electronics > Power Accessories > PDUs |
| Brand | EVERSECU |
| Manufacturer | EVERSECU |
| Model Number | ES-CP2409-5A |
| Compatible Devices | Camera |
| Connector Type Used on Cable | lightning |
| Output Wattage | 120 Watts |
| Form Factor | New Metal housing, Compressive, Wear-resisting Reinforcement Enclosure Structure |
| Wattage | 120 watts |
| Cooling Method | Air |
| Current Rating | 5 Amps |
| Maximum Input Voltage | 220 Volts |
| Minimum Input Voltage | 110 Volts |
| Upper Temperature Rating | 60 Degrees Celsius |
| UPC | 778299332729 |
| Mfr Part Number | ES-CP2409-5A |
| Connector Type | lightning |
Available variants
Size
- 18CH 10Amp
- 9CH 5Amp
Recommended next
Tripp Lite 24 Outlet Horizontal 1U Rackmount PDU, 15 Amps, 120V, 15ft Cord (PDU2430)
A basic, switchless 1U rackmount PDU with 24 NEMA 5-15R outlets (12 front, 12 rear) and a long 15-ft L5-30P input cord. It uses dual 15A circuit breakers, so you can split your loads across circuits, but you still need to plan outlet usage carefully to avoid tripping a breaker. Best for home labs and IT racks that want straightforward power distribution with solid mounting options.
CyberPower PDU41003 Switched PDU, 100-120V, 30A (Derated to 24A), 16 Outlets, 2U Rackmount
A 2U switched rack PDU that lets you control 16 NEMA 5-20R outlets individually or in groups over the network, with a front LCD for local monitoring. It is a strong fit for server racks and IT setups that want per-outlet switching and basic power telemetry, but the long fixed input cord may be awkward for tight cable management.
TRENDnet 6-Outlet Managed PDU, TPI-06, Rackmount Power Distribution Unit, UL review
The TRENDnet TPI-06 is a network-manageable, rackmount PDU with six controllable NEMA 5-15R outlets plus one bypass outlet, built for remote power control and per-outlet monitoring. It’s a strong fit for small server closets, labs, and home networking setups that benefit from scheduled power and email alerts, with the main caveat that managed features require using TRENDnet Hive.
CyberPower CPS1215RMS Surge Protector, 120V/15A, 12 Outlets, 15 ft Power Cord, 1U Rackmount
The CyberPower CPS1215RMS is a 1U rackmount surge protector with 12 NEMA 5-15R outlets (front and rear) and a 15 ft power cord, built for network racks, data closets, and home office setups that need flexible plug access. It’s commonly chosen for its solid metal housing, low-profile rack fit, and practical outlet layout, with the main tradeoff being that it’s not a smart PDU and surge performance cannot be “proven” after installation.