Tripp Lite Single Phase Switched Mini PDU, 100/120/127V, Remote LX Platform Interface, 6 ft. Cord, 0U, TAA (PDU15NETLX)
Quick take
The Tripp Lite PDU15NETLX is a switched mini PDU built for small, single-phase installations where you only need two outlets. With a built-in LX Platform interface, you can remotely control each NEMA 5-15R outlet (including remote reboot) and receive email notifications, but it is designed for a narrow outlet count, not whole-rack power distribution.
Pros and cons
Pros
- Two individually switched NEMA 5-15R outlets for remote on, off, recycle, and lockout behavior.
- Built-in LX Platform interface supports 24/7 remote access plus email notifications.
- Fits compact deployments, mounting in 0U rack space, on a wall, or under a counter.
- TAA-compliant for GSA Schedule purchases.
Cons
- Only two outlets, so it is not the right fit if you need power for many devices.
- Network control depends on LX Platform setup and connectivity, which may require initial configuration steps.
- Limited to single-phase 100/120/127V power environments (15A class), so power planning matters.
What buyers think
Buyer-review evidence for this specific model is limited, but the available feedback highlights a practical software and connectivity theme. One common point is that updated LX-based platform support can make remote access smoother, with configuration requiring a serial connection for certain network information gathering steps if DHCP is used. After setup, buyers describe the interface as straightforward for logging in and controlling or configuring the PDU remotely.
What this switched mini PDU is designed to do
The PDU15NETLX is a compact, network-managed power distribution unit intended for small equipment groups, such as a couple of network devices, a small set of servers, or any scenario where remote power cycling is helpful. Instead of simply providing outlets, it adds individual outlet control so you can remotely reboot devices that are unresponsive, shut them down, or lock them out from power actions when you need predictable behavior.
Remote power control with the LX Platform
A key differentiator is the built-in LX Platform interface, which is designed for continuous access (24/7) and supports email notifications. That combination is meant for operators who want to handle common power events without needing to be on-site. Outlet-level control is the core workflow here, with front-panel LEDs indicating each outlet’s on or off state, so local status checks are possible as well.
Outlet count and installation fit
This unit is a 0U form factor, meaning it is meant to mount without taking up rack “U” space. You can mount it vertically in 0U rack space, or use included mounting brackets for wall or under-counter placement with user-supplied hardware. The design targets small builds where you need exactly two switched outlets and don’t want a larger PDU footprint.
Electrical and compatibility basics
For power, it is rated for single-phase input in the 100/120/127V range (127V max listed) with a 15A current class and output wattage information listed around 1.4 kW. It uses a six-foot power cord with a NEMA 5-15P input plug to connect to a compatible AC power source such as a protected UPS or generator. The two outlets are NEMA 5-15R, individually controlled, which makes it best aligned with devices that fit this standard plug type.
Pros and cons in plain terms
When it’s a good match
- You want remote power reboot and control for a small number of devices (two outlets).
- Your environment supports single-phase 100/120/127V power and you’re using NEMA 5-15R equipment.
- You value always-on remote management with email notifications and the ability to lock out outlet power behavior when needed.
When you should look elsewhere
- You need more than two controlled outlets, such as a full rack distribution scenario.
- You prefer a simpler, purely local switched strip with no LX-style remote configuration requirements.
- Your devices require different outlet types or different voltage/current planning than the unit supports.
Price and availability
Pricing varies by marketplace timing. Availability can be limited, so if this model fits your exact outlet and voltage needs, it can be worth checking current stock and the latest price before you plan installation.
Alternatives to consider (by use case)
If you are deciding between PDUs, the biggest choice drivers here are outlet count, remote management method, and rack or non-rack mounting needs.
- More outlets, same remote-control goal: Look for a switched network PDU with a higher number of outlets if you’re powering more than two devices.
- Simpler control: If you only need local switching, a basic power strip style switched PDU may reduce complexity, though you lose remote reboot capabilities.
- Different power standards: If your equipment uses other plug types, prioritize a PDU that matches your outlet standard rather than trying to adapt.
Verdict
The Tripp Lite PDU15NETLX is a strong fit for small, single-phase network deployments that need remote outlet-level power actions for two devices. It is compact, designed for 0U mounting, and built around the LX Platform interface for always-on access and notification workflows. The main reason it may not work for every buyer is the limited two-outlet capacity, so it’s best viewed as a targeted remote power control tool rather than a general-purpose rack PDU.
FAQs
How many devices can you control with this mini PDU?
It provides two NEMA 5-15R outlets, and each outlet is individually switched for remote control actions.
Does it support remote power reboot or recycle?
Yes. Each outlet can be remotely controlled, including functions described for remote on, off, recycle, and lockout behavior.
What kind of power does it work with?
It is designed for single-phase 100/120/127V AC power (with a 15A class rating listed) and uses a NEMA 5-15R outlet type for connected devices.
Can it be mounted without using rack space?
It is a 0U form factor, and you can mount it vertically in 0U rack space, or mount it on a wall or under a counter using the included mounting brackets and user-supplied hardware.
What does the LX Platform interface provide?
The built-in LX Platform interface is intended to support 24/7 remote access and includes email notifications, plus the ability to log in and control each outlet.
Is it TAA-compliant?
Yes, it is listed as TAA-compliant for GSA Schedule purchases.
Is this a good choice for a full rack installation?
Usually no, because it only has two switched outlets. It is better for small groups of devices where you need remote control for one or two plugs.
CTA: Buy on Amazon
Specifications
| Product Title | Tripp Lite Single Phase Switched Mini PDU, 100/120/127V, Remote LX Platform Interface, 6 ft. Cord, 0U, TAA (PDU15NETLX) |
|---|---|
| Category | Electronics > Power Accessories > PDUs |
| Brand | TRIPP LITE |
| Manufacturer | TRIPP LITE |
| Model Name | 44979603 |
| Model Number | PDU15NETLX |
| Item Weight | 2.6 Pounds |
| Compatible Devices | Personal Computer |
| Connector Type Used on Cable | ATX |
| Output Wattage | 100 |
| Form Factor | 0U |
| Wattage | 1.4 KW |
| Cooling Method | Air |
| Power Supply Design | External |
| Connector Quantity | 2 |
| Current Rating | 15 Amps |
| Maximum Input Voltage | 127 Volts (AC) |
| Minimum Input Voltage | 63.5 Volts (AC) |
| System Bus Connector Type | ATX |
| Item Dimensions | 1.73 x 5 x 7 inches |
| UPC | 037332203267 |
| Global Trade Identification Number | 00037332203267 |
| Mfr Part Number | PDU15NETLX |
| Warranty Description | 2-year limited warranty |
| Item Type Name | Power Distribution Unit |
| Built-In Media | ^PDU15NETLX 1.4kW 100/127V Single-Phase Switched Mini PDU^(2) Mounting brackets w/screws^Owner’s manual |
| Connector Type | ATX |
Recommended next
TRENDnet 6-Outlet Managed PDU, TPI-06, Rackmount Power Distribution Unit, UL review
The TRENDnet TPI-06 is a network-manageable, rackmount PDU with six controllable NEMA 5-15R outlets plus one bypass outlet, built for remote power control and per-outlet monitoring. It’s a strong fit for small server closets, labs, and home networking setups that benefit from scheduled power and email alerts, with the main caveat that managed features require using TRENDnet Hive.
CyberPower CPS1215RMS Surge Protector, 120V/15A, 12 Outlets, 15 ft Power Cord, 1U Rackmount
The CyberPower CPS1215RMS is a 1U rackmount surge protector with 12 NEMA 5-15R outlets (front and rear) and a 15 ft power cord, built for network racks, data closets, and home office setups that need flexible plug access. It’s commonly chosen for its solid metal housing, low-profile rack fit, and practical outlet layout, with the main tradeoff being that it’s not a smart PDU and surge performance cannot be “proven” after installation.
Mopar Genuine Mopar Power Distribution Center - 68305537AB
The Mopar Genuine Power Distribution Center (68305537AB) is an OEM-style power accessory intended to replace or complete an automotive power setup. Buyer feedback is limited but points to authentic fit and straightforward functionality when you need the correct Mopar part.
CyberPower PDU41001 Switched PDU, 100-120V/15A (Derated to 12A), 8 Outlets, 1U Rackmount
The CyberPower PDU41001 is a 1U, rackmount switched PDU that adds network control (local and remote) for 8 NEMA 5-15R outlets plus an LCD for at-a-glance electrical readings. It’s designed for people who want to power-cycle devices from anywhere and monitor PDU vitals, with the main tradeoff being an input current limit that’s derated to 12A in practice.