Single Board Computers
Electronics / Computers & Accessories / Computer Components / Single Board Computers
85 review articles in this category branch, ordered by product demand and buyer signal strength.
Electronics / Computers & Accessories / Computer Components / Single Board Computers
Electronics / Computers & Accessories / Computer Components / Desktop Barebones
Electronics / Computers & Accessories / Computer Components / Internal Components
Electronics / Computers & Accessories / Computer Components / Computer Screws
Electronics / Computers & Accessories / Computer Components / Laptop Replacement Parts
Electronics / Computers & Accessories / Computer Components / External Components
The Western Digital 4TB WD Blue WD40EZZX is a 3.5-inch SATA internal HDD aimed at dependable everyday storage, desktop PCs, office use, backups, and other non–ultra-fast needs. It pairs a 5400 RPM drive with 128MB cache and WD’s bundled Acronis cloning software, but it’s not designed for SSD-like responsiveness.
Kingston NV3 1TB is a single-sided M.2 2280 PCIe 4.0 NVMe SSD designed for desktop and laptop upgrades, targeting fast boot and smoother load times with up to 6,000 MB/s read speeds. It’s a strong value pick for everyday use and gaming, with one notable caveat: some buyers report speeds dropping after sustained activity.
The Seagate IronWolf Pro 24TB (ST24000NT002) is a 3.5-inch, 7200 RPM, SATA 6Gb/s NAS hard drive built for multi-bay RAID storage. It targets 24×7 reliability with CMR recording, workload support up to 550TB/year, and IronWolf Health Management, plus complimentary Rescue Data Recovery services.
The WD Black 4TB (WD4006FZBX) is a 3.5-inch SATA internal HDD designed for desktop gaming PCs and system builders who want large-capacity storage with solid mechanical drive performance. It leans into reliability features like StableTrac and Dynamic Cache, but it is also a spinning drive, so noise can be a deal-breaker for ultra-quiet setups.
The WD Blue SN5000 NVMe (4TB, M.2 2280) targets mainstream performance needs with PCIe Gen 4 speeds up to about 5,500 MB/s read. Buyers report strong real-world speed, good sustained write behavior, and solid year-over-year reliability for gaming and general system upgrades, with the main caveat being that it is not chasing PCIe Gen 5 or the absolute top-tier NVMe speeds.
Crucial P310 is a compact M.2 2230 PCIe Gen4 NVMe SSD built for handheld gaming PCs and other tight-space upgrades (Steam Deck, ROG Ally, select Surface and Dell systems). Reviewers highlight strong perceived speed, smoother responsiveness after cloning, and power-friendly behavior, with one key caution: it can run warm in some setups and small adapters.
Samsung’s 9100 PRO is a PCIe 5.0 x4 NVMe M.2 2280 SSD built for demanding workloads where fast sequential throughput matters, with hardware encryption and Samsung Magician support. It’s a strong fit for AI-ready PCs and high-end desktops, but you should only buy it if your system truly supports PCIe 5.0 and you have realistic performance needs beyond PCIe 4.0.
Seagate Skyhawk AI 16TB (ST16000VE004) is a 3.5-inch SATA 6Gb/s 7200 RPM surveillance HDD built for 24/7 video recording and AI-enabled NVRs. Buyers highlight simple installation, strong video playback/scrubbing performance, and quiet operation in everyday setups, with one note to consider possible variability in long-term reliability.
UGREEN’s USB 3.0 switch lets two computers share the same set of USB peripherals through a single, compact 4-port hub. It supports data switching up to 5Gbps (USB 3.0), works with Windows/macOS/Chrome OS/Linux, and offers both remote controller and button switching. The main caveat is that it’s a data-only USB switch (no monitor/video sharing) and some devices may need the included USB-C power approach to stay stable.
The WD Blue SN5100 1TB NVMe SSD is an M.2 2280 PCIe Gen 4.0 drive built for faster boot and quicker file transfers, with read speeds rated up to 7,100MB/s. It’s a straightforward option for PC or laptop storage upgrades, with migration software included and a 5-year limited warranty. Buyer-fit caveat: you’ll need the right M.2 2280 slot and appropriate mounting hardware (some systems may require extra screws/spacers).
Gigastone’s 2.5-inch SATA SSD lineup (sold as a 10-pack of 128GB drives) targets budget-friendly upgrades for PCs, laptops, and PS4, with claimed read speeds up to 500MB/s via SLC caching. It’s a practical option for entry-level performance and for buyers who want multiple spare drives, but 128GB is tight for modern OS and game libraries.
The SIX X7400 1TB NVMe SSD is a PCIe Gen4x4 M.2 2280 drive designed for faster gaming loads and quicker transfers, and it includes a heatsink and installation extras. It can deliver top speeds on PCIe Gen4-capable systems, but buyers with PCIe Gen3-only slots should expect reduced performance.
The iRasptek Pi 5 8GB starter kit bundles a Pi 5, a 27W USB-C PD power supply, an active PWM cooler, and a durable aluminum case, with Raspberry Pi OS (64-bit) and a 128GB preloaded card for a quicker “plug and go” setup. It is a strong choice for home labs, media playback, and projects that benefit from more RAM, with the main tradeoff being you are locked into this kit’s specific card, case, and cooling setup.
The RasTech Raspberry Pi 5 8GB Kit bundles the essentials for a quick start, including an 8GB Pi 5 board, active cooling, a RasTech case, dual 4K micro-HDMI cables, a 27W GaN USB-C power supply, and a ready-to-use 64GB card setup. Best for makers, learners, and home projects that benefit from stronger CPU/GPU performance and steadier thermals, with the main tradeoffs being case and cooling fit-by-assembly quirks.
Seagate’s BarraCuda 24TB SATA HDD (3.5-inch, 7200 RPM, 512MB cache) is a strong pick for bulk storage, media libraries, backups, and game/media drives where cost per terabyte matters. It is not meant to replace an SSD as a system boot drive, and buyer experience can depend on the SATA controller setup (especially with very large capacities).
The CanaKit Raspberry Pi 5 16GB Starter Kit PRO (Turbine Black, 128GB edition) is an all-in-one bundle aimed at getting you running fast, with 16GB RAM, a pre-loaded 128GB microSD card, a case with active cooling, a heat sink, a PWM fan, and a 45W USB-C PD power supply. It is a strong pick for learning, coding, and everyday Pi projects, especially if you want less part-hunting than a bare board. The main caveat is that it is still a single-board computer, so some desktop-style workflows may require extra peripherals and setup.
The RasTech Raspberry Pi 5 Kit bundles the Raspberry Pi 5 (8GB) with a case and active cooler, targeting makers and beginners who want a ready-to-assemble starting point. It supports dual 4Kp60 micro-HDMI displays, gigabit Ethernet, dual-band Wi‑Fi, Bluetooth 5.0, faster SD card mode (SDR104), and a PCIe interface for fast peripherals (with separate add-ons). The main catch is that it is a kit that still requires you to supply common items like a microSD card and peripherals, and assembly can take some careful alignment.
The CanaKit Raspberry Pi 5 Basic Kit is a no-fuss starting point for projects that need more performance than older Raspberry Pi models. It bundles the Raspberry Pi 5 (8GB RAM), a 45W USB-C PD power supply, and heat sinks, but you will need to add storage (it does not include an SD card).
The Seagate Exos ST32000NM004K is a 3.5-inch 32TB enterprise SATA HDD built for data-center style workloads, prioritizing high capacity, power efficiency, and long-run dependability. It suits bulk storage and always-on NAS or server use, but it is not a fast, modern alternative to SSDs, and some buyers report potential DOA or reliability issues.
The Bolt Dropper 502pcs Computer Screw Assortment Kit is a labeled, multi-thread screw and standoff set built for PC building and repairs. It’s a strong fit for people who want to avoid being stuck mid-upgrade, but it is not a guarantee for every niche device (some specialized systems may not match the included sizes).
The iRasptek Raspberry Pi 5 16GB starter kit is built for fast, low-friction setup, with an aluminum case, an active PWM fan, a 27W USB-C power supply, and a pre-installed Pi OS setup. It’s a strong pick for light desktop use, learning, media playback, and project tinkering, but buyers who want NVMe via a larger M.2 HAT+ style setup may find the included case limits.
The Arduino UNO Q 4GB is a dual-brain hybrid board that blends an AI-capable Linux side with a real-time low-power microcontroller for robotics, voice, and vision-style prototypes. It offers UNO-form-factor expansion, 4 GB RAM, 32 GB eMMC, dual-band Wi‑Fi 5, and Bluetooth, but setup and power expectations can be picky for certain USB-C hubs and workflows.
The Raspberry Pi NoIR Camera Module V2 pairs an 8MP Sony IMX219 sensor with a fixed-focus lens for sharp infrared-ready imaging. It supports common Pi camera video modes (including 1080p30) and is widely used for low-light and night projects like monitoring, security-style setups, and webcam uses.
A 400-piece assortment kit aimed at DIY PC builds and repairs, covering common screws and standoffs for motherboard, SSD/HDD, fans, power supplies, and case work. It’s valued for having the right parts on hand and keeping them organized, with one recurring tradeoff: go easy on torque to help avoid stripping on smaller screws.
The MINISFORUM MS-A2 barebone pairs an AMD Ryzen 9 9955HX with expandable memory and storage, plus multiple fast networking options (including dual 10G SFP+). It can be an attractive homelab and virtualization workstation, but the “barebone” setup means you must supply RAM, SSD(s), and an OS, and buyers report some PCIe wiring and thermal tuning caveats for heavier workloads.
A battery-friendly ESP32 learning kit that pairs an ESP32 board with a camera extension and a library of guided projects. It’s built to help beginners progress through electronics and IoT basics, with multiple programming options (Arduino C++, MicroPython, and Scratch) and a support-driven learning path.
The MSI Cyborg 15 pairs an Intel Core i7-12650H with an NVIDIA RTX 4060, 32GB DDR5, and a 1TB PCIe NVMe SSD in a 15.6-inch FHD 144Hz gaming laptop setup. It is a strong choice for 1080p high-refresh play and everyday multitasking, with a key tradeoff being the tendency to run warm under load and the fact that buyers’ installation expectations may vary.
The AITRIP Type-C ESP32 development board is a compact, maker-friendly ESP-WROOM-32 (dual-core) platform with built-in Wi-Fi and Bluetooth, USB Type-C (with CP2102) programming, and a lot of I/O options for sensors and interfaces. It is a strong fit for Wi-Fi/BLE projects and quick prototyping, with the main tradeoff being that you will need to learn C++ (or rely on an ecosystem toolchain) to fully leverage it.
The Western Digital WD Green SN3000 is a Gen4 NVMe M.2 2280 SSD built for faster app launches and smoother everyday multitasking, with read speeds up to 5,000 MB/s and a single-sided slim design for thin laptops. It appears to deliver “works as expected” performance for users, with limited but positive mentions of heat and compatibility, making it a solid upgrade for compatible M.2 slots.
The Arduino UNO Q 2GB (ABX00162) is a hybrid single-board computer built in the classic UNO form factor, combining a Qualcomm Dragonwing MPU with a low-power STM32 MCU. It’s designed for buyers who want Linux Debian, Python-friendly development, and Arduino-style expansion (UNO shields, Qwiic, Modulino) for lightweight AI vision, voice, and IoT/robotics prototypes. The main caveat: setup and accessory compatibility can be finicky because power negotiation and some companion tooling may be under active development.
The ASUS NUC 14 Pro Tall is a compact desktop barebone built around the Intel Core Ultra 7 155H, aiming at quiet, efficient everyday performance (and light server use) with Thunderbolt 4 and Wi‑Fi 6E. It’s a strong fit if you want to add your own RAM and storage, but buyer experience hinges on setup know-how and the limited onboard configuration options some users report.
A black alloy-steel screw assortment designed to help you replace missing laptop, SSD/M.2, and small PC-case fasteners without hunting down exact sizes. Reviewers report good fit for common laptop screw holes, with the main caveat being organization, since some storage issues can make it harder to pick the right screw quickly.
The LILYGO T-Deck Plus is a compact ESP32-S3 development board designed for LoRa/mesh-style field messaging, with a built-in screen and keyboard for standalone configuration and use. Reviewers highlight strong real-world reliability and helpful on-device monitoring, but setup can require computer time, and the included antenna may be underwhelming for some buyers.
ASRock’s DeskMini 310W is a compact Intel 8th-gen barebones system built around low-power performance, flexible storage (2.5-inch drives plus an Ultra M.2 slot), and triple display outputs (DP, HDMI, VGA). It’s a strong fit for a quiet home office or small workstation, but it is not designed for power-gpu builds, and Intel 8th-gen CPUs can be a sourcing challenge.
The Freenove Raspberry Pi Pico 2 W is a dual-core development board with built-in 2.4 GHz 802.11n Wi-Fi and Bluetooth 5.2, plus GPIO, PWM, ADC, and common serial interfaces for maker projects. Buyers like the overall value, strong wireless connectivity, and the flexibility to program with MicroPython, C, or other included example code, with the main caveat that you will need to download tutorials and supporting items for projects.
A compact, industrial-style USB to serial converter that connects to RS232, RS485, or TTL (UART) devices. It emphasizes isolation and protection circuitry around the embedded FT232RL, plus a metal enclosure for hands-on installs and testing in the field or lab.
The ASTARON M.2 SSD screws kit is a small, practical fix for anyone adding an M.2 2280 NVMe SSD and missing the mounting hardware. It includes multiple screw heights, a magnetic screwdriver to make handling tiny screws easier, and a simple slotted drive design.
The ELEGOO 3PCS ESP-32 Development Board USB-C is a compact dual-core ESP-32 board bundle aimed at fast prototyping. With integrated 2.4GHz Wi‑Fi and Bluetooth, a 240 MHz dual-core processor, and common interfaces (GPIO, UART, SPI, I2C), it’s a solid choice for low-power IoT experiments and smart-device builds.
The CanaKit Raspberry Pi 5 Starter Kit PRO bundles the essentials for getting started quickly: a Raspberry Pi 5 (4GB RAM), a 128GB microSD card with Raspberry Pi OS pre-loaded, a low-noise fan, a black anodized heat sink, a case, and a 45W USB-C PD power supply. It’s a strong pick for home automation projects and beginner-to-intermediate Raspberry Pi users, with one notable caveat to weigh: a reported (but not consistently proven) risk of reliability issues reported by a small number of buyers.
The KEYESTUDIO 48 Sensors Modules Starter Kit is a mixed set of Arduino-focused sensor and driver modules (plus components like an LCD, servo, and relay) designed to help beginners practice wiring and example code. It works best if you already have an Arduino-compatible board and you are comfortable using online tutorials for setup and programming.
The FEZOBR 14-inch 1080p portable screen extender is designed to add a second display on the go with plug-and-play USB-C (or HDMI plus USB-A) and extend or mirror modes. It’s a strong fit for remote work and travel, with a key caveat: compatibility can vary by laptop and connection setup.
This M.2 2280 (NGFF/PCIe NVMe) mounting screw kit is a budget-friendly way to replace missing screws or stock up before an SSD install. It includes 16 flat-head screws and a small screwdriver, with reports of a snug, no-wobble fit for common 2280 NVMe SSDs.
Cooler Master CRYOFUZE is a thermal paste aimed at lowering CPU temperatures, including for refreshed builds where old paste has dried out. Reviewers describe strong cooling results for the price, with the main caveat being that application technique still matters and some buyers received paste that was too hard to use.
The Sintron ST-002 is a coin-operated timer control power box designed for commercial, time-based equipment like washers, arcade machines, and massage chairs. It supports up to 110V/120V 16A and uses an 8-channel multi-coin acceptor with an LED countdown display, but buyers should plan for setup, programming, and potential reliability variability seen in limited reviews.
The ASUS Chromebox 5a is a compact Chrome OS desktop built for everyday web work, Gmail, Docs, and light productivity, with quad-display support and modern wireless (Wi‑Fi 6E, Bluetooth). It pairs an Intel Celeron 7305 with 8GB RAM and a 128GB NVMe SSD for responsive day-to-day use, but Chrome OS limitations and limited storage headroom may be a tradeoff for heavier workflows.
This Flipper Zero Wi-Fi developer board starter kit bundles the Wi-Fi hardware plus protective case parts, so you can set up wireless features while keeping your device protected. Most buyers report it works as expected, but success depends on following the flashing procedure, and the Wi-Fi board is limited to 2.4 GHz (not 5 GHz).
A 3.5-inch, 2TB SATA 6.0Gb/s surveillance-style hard drive aimed at DVR/NVRs, desktops, and NAS builds that want a large capacity with a 7200RPM class spec and 64MB cache. The main caveat is buyer reports that it may not consistently match the advertised rotational speed, plus it is a bare drive that requires formatting to show up.
A 3.5-inch 4TB SATA 6.0Gb/s internal drive built for always-on use cases like desktops, NAS, and CCTV DVR systems, with a 7200RPM spindle and 64MB cache. It’s a bare drive only, so plan for your own mounting hardware, plus formatting in your system before it shows up.