Raspberry Pi NoIR Camera Module V2 - 8MP 1080P30
Quick take
The Raspberry Pi NoIR Camera Module V2 is an 8MP camera module built around a Sony IMX219 sensor, designed specifically for Raspberry Pi projects that benefit from infrared imaging and low-light performance. It works with Pi systems using the standard CSI interface and supports video modes up to 1080p30.
The main thing to watch is that it uses a fixed-focus lens, so it is best when your subject distance is reasonably consistent (not for rapid refocus situations).
Pros and cons
Pros
- 8MP Sony IMX219 image sensor with support for stills up to 3280 x 2464.
- Video capture up to 1080p30, plus additional lower resolutions for different needs.
- NoIR design supports infrared imaging (useful for night or IR-based projects).
- Compact CSI camera module that’s commonly used in Raspberry Pi builds.
Cons
- Fixed-focus lens means you cannot fine-tune focus for changing distances.
- It is meant for Raspberry Pi platforms with a standard CSI interface, so compatibility is limited to supported boards.
What buyers think
Buyer-review evidence points to this NoIR module being a practical, good-value way to add low-light capability to Raspberry Pi projects. Many mentions focus on it working well for common Pi use cases like webcam-style setups and night imaging, especially when projects benefit from infrared-friendly capture.
Several comments also highlight ease of getting started and software compatibility in typical Raspberry Pi workflows. Overall, the review pattern suggests it performs “sufficiently” for maker projects, with low-light/IR results as a key reason people choose the NoIR variant.
Key features and specifications that matter
8MP sensor for clear stills and detailed frames
This camera module uses a Sony IMX219 sensor, rated for 8 megapixel imaging. It can capture still images at up to 3280 x 2464 pixels, which is useful for projects where you want more detail than a lower-resolution camera.
NoIR design for infrared-friendly low-light capture
The “NoIR” approach removes the infrared-cut filtering behavior common on standard cameras. That matters if your project involves infrared illumination or you want better visibility in darker environments compared to a typical daytime-oriented module.
Video modes up to 1080p30
For motion video, it supports 1080p30, as well as other listed modes (720p60 and 640x480p90) depending on your performance and framing goals.
Raspberry Pi CSI connection, fixed-focus lens
The module connects to compatible Raspberry Pi single-board computers through the CSI interface and uses a fixed-focus lens. The compact form factor makes it easier to integrate into enclosures, robots, and small monitoring builds, but the fixed-focus nature is the tradeoff that shapes buyer fit.
Who it’s best for
- Low-light and IR hobbyists who want a Raspberry Pi camera that can capture infrared-friendly images.
- Maker projects such as monitoring-style setups, night observation, or simple CCTV-like builds.
- “Pi webcam” style uses where the camera is mounted at a stable distance and you mainly need consistent framing.
Who should avoid it
- Buyers needing adjustable or autofocus-like framing, since the lens is fixed focus.
- People whose devices do not support the standard CSI interface, because this module is intended for compatible Raspberry Pi platforms.
Pros and cons (real-world take)
Why people choose it
- Low-light capability is a core selling point. The NoIR approach is a direct match for night projects.
- Enough resolution and video modes for typical Pi builds. 8MP stills and up to 1080p30 give you flexibility without going into premium camera territory.
- Consistent integration for Raspberry Pi ecosystems. Reviews frequently tie the module to working well for common Pi workflows and use cases.
Main limitations to plan around
- Fixed focus affects what “good” looks like. If your subject distance changes a lot, you may want a different camera approach.
- Compatibility depends on CSI. If your board does not have the correct interface, you will need a different camera option.
Price and availability
The module is positioned as an affordable camera add-on for Raspberry Pi users, with the listing showing a current price point in the sub-$50 range and limited stock shown at the time of lookup. If you need it for a time-sensitive build, it can be smart to check availability before designing around the module.
Verdict
The Raspberry Pi NoIR Camera Module V2 - 8MP 1080P30 is a strong pick for Pi users building low-light or infrared-friendly projects, especially when the camera can be mounted so focus does not need to change. It offers a solid mix of resolution and supported video modes through the CSI interface, and buyer feedback suggests it is a reliable, straightforward module for maker-style applications.
FAQ
Is the Raspberry Pi NoIR Camera Module V2 good for night vision?
Yes, it is designed for infrared-friendly imaging because the NoIR approach supports capturing in low-light conditions when paired with the right infrared illumination setup.
Does it support 1080p video?
It supports video capture up to 1080p30, with additional listed modes such as 720p60 and 640x480p90.
Will it work with any Raspberry Pi?
It is meant for Raspberry Pi single-board computers and development boards that provide a standard CSI interface, since the module connects via CSI.
Is autofocus available?
No. This module uses a fixed-focus lens, so it is best for projects where the camera distance to the subject is fairly consistent.
What resolution can it capture for still photos?
It can capture static images up to 3280 x 2464 pixels.
Specifications
| Product Title | Raspberry Pi NoIR Camera Module V2 - 8MP 1080P30 |
|---|---|
| Category | Electronics > Computers & Accessories > Computer Components > Desktop Barebones |
| Brand | Raspberry Pi |
| Manufacturer | Raspberry Pi Foundation |
| Model Name | Raspberry Pi NoIR Camera Module V2 |
| Model Number | RPI3-NOIR-V2 |
| Operating System | Raspbian |
| Memory Storage Capacity | 1 TB |
| Connectivity Technology | Infrared |
| Processor Brand | Broadcom |
| Wireless Compability | Infrared |
| Compatible Devices | Single Board Computers or Development Boards with standard CSI interface |
| RAM Memory Technology | LPDDR2 |
| Processor Count | 1 |
| Total Usb Ports | 4 |
| Item Dimensions L x W x H | 0.1"L x 1"W |
| UPC | 616909468003 640522710898 |
| Global Trade Identification Number | 00640522710898 |
| Mfr Part Number | RPI3-NOIR-V2 |
Recommended next
iRasptek Starter Kit for Raspberry Pi 5 RAM 8GB -128GB Edition of OS-Bookworm Pre-Loaded (Aluminum Case)
The iRasptek Pi 5 8GB starter kit bundles a Pi 5, a 27W USB-C PD power supply, an active PWM cooler, and a durable aluminum case, with Raspberry Pi OS (64-bit) and a 128GB preloaded card for a quicker “plug and go” setup. It is a strong choice for home labs, media playback, and projects that benefit from more RAM, with the main tradeoff being you are locked into this kit’s specific card, case, and cooling setup.
iRasptek Starter Kit for Raspberry Pi 5 16GB RAM - Pre-Loaded with 128GB Edition Pi OS (Aluminum Case)
The iRasptek Raspberry Pi 5 16GB starter kit is built for fast, low-friction setup, with an aluminum case, an active PWM fan, a 27W USB-C power supply, and a pre-installed Pi OS setup. It’s a strong pick for light desktop use, learning, media playback, and project tinkering, but buyers who want NVMe via a larger M.2 HAT+ style setup may find the included case limits.
DIN Rail Mount Bracket for Raspberry Pi 1A+ 1B+ 2B 3B 3B+ 4B 5 Zero UNO Mega-2560 BeagleBone Black
A simple aluminum DIN rail mounting plate for popular single-board computers like Raspberry Pi (multiple generations, including Pi Zero and Pi 5) and BeagleBone boards. Buyers report it snaps in securely and saves desk space, with one caveat that the DIN rail clamp can feel a bit less tight on some Pi 5 setups.
ELEGOO 3PCS 0.96 Inch OLED Display Screen Module Compact Self-Luminous SSD1306 I2C Display Mini Screens for Arduino Projects
These compact 0.96-inch OLED modules use the SSD1306 over I2C (3.3V to 5V) and are a solid fit for Arduino and Raspberry Pi projects that need clear, self-luminous 128x64 graphics. The main tradeoffs to know are the fixed (non-configurable) blue/yellow look, limited character size on the small screen, and potentially non-standard mounting hole spacing.