DIN Rail Mount Bracket for Raspberry Pi 1A+ 1B+ 2B 3B 3B+ 4B 5 Zero UNO Mega-2560 BeagleBone Black
Quick take
This aluminum DIN rail bracket is designed to mount several popular maker and industrial SBC boards, including many Raspberry Pi models and BeagleBone variants. It includes the mounting hardware and standoffs needed for a straightforward rail-based install, and buyers generally describe the clips and fit as secure. The main caveat is that, for some setups (notably certain Pi 5 placements), the clamp feel can be slightly looser than other DIN plates.
Pros and cons
Pros
- Supports a wide range of boards (Raspberry Pi generations, Pi Zero, UNO/Mega, and multiple BeagleBone models).
- Made from an aluminum bracket sheet (1.5 mm) and built for stable DIN rail mounting.
- Includes rail adapters, screws, and M2.5 standoffs for installation.
- Buyers report snug clasps and secure mounting in real use.
Cons
- Some buyers feel the DIN rail grip could be tighter for certain Pi 5 configurations.
- DIN rail compatibility depends on the rail width you have (it supports common sizes like 35 mm, 32 mm, and 15 mm).
What buyers think
Buyer-review evidence is limited but consistent on a few decision-relevant points. Multiple buyers describe the bracket as working as intended, with snug clasps and everything fitting properly. People also use the mount to clean up setups (for example, mounting multiple Raspberry Pis and freeing up desk space when relocating boards to a rail or wall-mounted rail). The clearest limitation mentioned is that the DIN rail fit can feel less tight than alternative DIN plates in at least one Pi 5 use case.
What this bracket is for
This is a DIN rail mounting solution for single-board computers and compatible embedded boards, aimed at installs where you want repeatable mounting, easier cable organization, and a more industrial-looking layout. It can be useful for workshop prototypes, automation projects, and vehicle or remote deployments where boards need to be firmly secured and protected from accidental contact.
Compatibility and rail fit
The bracket is intended for a broad set of boards, including many Raspberry Pi models (such as Pi 1A+, Pi 1B+, Pi 2 B, Pi 3 B/B+, Pi 4B, Pi 5, Pi Zero, and Pi Zero W). It also targets Arduino UNO R2/R3/R4, Mega 2560 R2/R3, and several BeagleBone variants (including BeagleBone Black and AI, Wireless, and Green models, plus the SanCloud BeagleBone Enhanced line).
On the DIN rail side, it is designed to work with DIN rail widths of 35 mm, 32 mm, and 15 mm. If you are using an uncommon rail profile or width, confirm that it matches these supported sizes before installing.
Build quality and included hardware
The bracket is made from a 1.5 mm aluminum sheet, balancing a light footprint with rigidity. The included kit supports a cleaner install without needing extra scavenged hardware: you get the aluminum bracket, a DIN rail adapter feed and mount screws, M2.5 standoffs, and both flat head and pan head M2.5 screws. There is also support for separating the carrier feet for wall-mount style use if you are not installing exclusively on a rail.
Pros for real-world use
Secure mounting for multi-board setups
Where buyers are mounting several boards together, the most practical value is consistency. Reviews describe the clasps and fit as snug, which matters when you are building a layout that should stay stable over time.
Good fit for Pi and BeagleBone projects that need protection
Mounting boards to a rail can help reduce desk clutter and keep devices more protected than leaving them on a tabletop. Buyers specifically mention improved protection and space savings when moving boards off a work surface.
Potential tradeoffs to consider
DIN rail tightness can vary by setup
One recurring point is that the rail clamp feel may not be as tight as some alternatives, at least in certain Pi 5 setups. If your rail is slightly different in tolerances, or if you are used to a tighter-fitting DIN plate, you may want to compare how you expect the board to seat and stay secured.
Check your board model and rail width first
This bracket supports many models, but the adapter and screw geometry are still specific. If your board is a less common revision, or if your DIN rail width does not match the supported sizes, you could run into fit issues.
Who should buy this bracket
- You are building a DIN rail enclosure or an industrial-style SBC setup for Raspberry Pi or BeagleBone.
- You want an aluminum mount that is intended to be stable on the rail and easier to mount than improvising with generic parts.
- You plan to mount one board or several boards cleanly, with the included standoffs and screws covering common installation needs.
Who should consider alternatives
- You need a very tight, very specific DIN rail clamp experience (for example, if you already own a different DIN plate that fits your rail more snugly).
- Your project uses an unusual DIN rail width or board revision not clearly covered by the bracket’s intended compatibility list.
Price and availability
Pricing can change over time. Use the button below to check the latest cost and shipping options for the current listing.
FAQ
Will this DIN rail mount fit Raspberry Pi 5?
It is designed to support Raspberry Pi 5.
Does it work with pi zero and pi zero w?
Yes, the bracket is intended to support Raspberry Pi Zero and Pi Zero W.
What DIN rail widths does it support?
It is specified for DIN rail widths of 35 mm, 32 mm, and 15 mm.
What hardware comes in the package?
The kit includes the aluminum bracket, a DIN rail adapter feed and mount screws, M2.5x10mm standoffs, M2.5x6mm flat head screws, and M2.5x6mm pan head screws.
Can you mount it on a wall instead of a DIN rail?
Yes. The carrier feet can be taken apart for wall-mount use.
Will it work with BeagleBone Black?
It is intended to support BeagleBone and BeagleBone Black, along with several other BeagleBone variants.
Specifications
| Product Title | DIN Rail Mount Bracket for Raspberry Pi 1A+ 1B+ 2B 3B 3B+ 4B 5 Zero UNO Mega-2560 BeagleBone Black |
|---|---|
| Category | Electronics > Computers & Accessories > Computer Components > Desktop Barebones |
| Brand | Chunzehui |
| Manufacturer | Electronics-Salon |
| Model Name | CASE-046-1 |
| Model Number | 8541612576 |
| Operating System | Linux |
| Color | Black |
| Specific Uses For Product | Industrial Control |
| Personal Computer Design Type | Barebone |
| Additional Features | DIN Rail Mounting |
| Hardware Interface | DVI, HDMI |
| Video Output Interface | DVI, DisplayPort, HDMI |
| Style Name | Industrial |
| Compatible Devices | Raspberry Pi, UNO MEGA-2560, BeagleBone |
| Power Plug Type | No Plug |
| Video Output | HDMI, DSI |
| Graphics Description | Dedicated |
| Graphics Card Interface | Integrated |
| Total Number of HDMI Ports | 1 |
| Connectivity Technology | HDMI |
| Wireless Compability | 802.11ac |
| Wireless Technology | Wi-Fi |
| Wireless Network Technology | Wi-Fi |
| Built-In Media | Aluminum bracket, DIN rail adapter feed and mount screws, M2.5x10mm standoffs, M2.5x6mm flat head screws, M2.5x6 pan head screws |
| Processor Brand | ARM |
| Memory Storage Capacity | 1 TB |
Recommended next
iRasptek Starter Kit for Raspberry Pi 5 RAM 8GB -128GB Edition of OS-Bookworm Pre-Loaded (Aluminum Case)
The iRasptek Pi 5 8GB starter kit bundles a Pi 5, a 27W USB-C PD power supply, an active PWM cooler, and a durable aluminum case, with Raspberry Pi OS (64-bit) and a 128GB preloaded card for a quicker “plug and go” setup. It is a strong choice for home labs, media playback, and projects that benefit from more RAM, with the main tradeoff being you are locked into this kit’s specific card, case, and cooling setup.
Sintron ST-002 Industrial Coin Operated Timer Control Power Box
The Sintron ST-002 is a coin-operated timer control power box designed for commercial, time-based equipment like washers, arcade machines, and massage chairs. It supports up to 110V/120V 16A and uses an 8-channel multi-coin acceptor with an LED countdown display, but buyers should plan for setup, programming, and potential reliability variability seen in limited reviews.
Raspberry Pi NoIR Camera Module V2 - 8MP 1080P30
The Raspberry Pi NoIR Camera Module V2 pairs an 8MP Sony IMX219 sensor with a fixed-focus lens for sharp infrared-ready imaging. It supports common Pi camera video modes (including 1080p30) and is widely used for low-light and night projects like monitoring, security-style setups, and webcam uses.
MINISFORUM AMD Ryzen 9 9955HX Barebone with MS-A2 Mini PC
The MINISFORUM MS-A2 barebone pairs an AMD Ryzen 9 9955HX with expandable memory and storage, plus multiple fast networking options (including dual 10G SFP+). It can be an attractive homelab and virtualization workstation, but the “barebone” setup means you must supply RAM, SSD(s), and an OS, and buyers report some PCIe wiring and thermal tuning caveats for heavier workloads.