m2 2280ssd Screws Kit, PCIe NVMe M.2 SSD Mounting Screws
Quick take
This is a small hardware kit made for mounting 2280-length PCIe NVMe (NGFF) M.2 SSDs. It includes 16 flat-head stainless-steel screws plus a screwdriver, and buyers commonly mention a secure, snug fit that helps prevent wobble during installation. The main caveat is simple: it is designed specifically for the M.2 2280 length, so it may not match drives or standoffs for other sizes.
Pros and cons
Pros
- Made for M.2 2280 PCIe NVMe/NGFF SSD mounting, including many common Samsung 2280 models.
- Includes 16 screws and a small screwdriver, which helps when you need extras or replacements.
- Buyers report the screws fit securely and keep the SSD firmly in place.
- Flat-head, fully threaded stainless-steel machine screws for a clean mount.
Cons
- Not a universal “any M.2” kit, it targets 2280 length drives and their mounting position.
- The included screwdriver is described as “just ok,” so tight work may require your preferred tool.
What buyers think
Buyer-review evidence is strongly focused on fit and usefulness. Multiple reviews describe the screws as easy to use, with a proper fit that holds the M.2 SSD down without looseness or wobbling. Several buyers also highlight that the kit includes enough screws for a full install and future upgrades, and that it can be handy when building or replacing a drive. There are limited notes beyond installation fit, so themes like build longevity and compatibility beyond 2280-style mounts have less review coverage.
What this screw kit is for
This kit is intended for mounting 2280-length M.2 SSDs that use PCIe NVMe (NGFF) style mounting. If your SSD is the common 80 mm “2280” form factor and your motherboard or laptop has a matching standoff and screw position, this set is meant to provide the tiny hardware needed to secure the drive.
Key specs that matter during an install
- Drive length focus: M.2 2280
- Screw count: 16 pieces
- Head style: flat head
- Material: stainless steel
- Thread: metric M2, fully threaded machine screw
- Included tool: one small screwdriver
Compatibility and fit: when it’s likely to work
Based on the intended use and buyer comments, this is a good match when all of the following apply:
- Your SSD is 2280 (not 2242, 2260, or 22110).
- Your slot supports PCIe NVMe / NGFF style M.2 SSDs.
- Your device expects flat-head M.2 mounting screws for the rear standoff position.
It is also commonly associated with installing popular 2280 SSD families (including certain Samsung 850/860/950/960/970 series models), which suggests buyers are frequently using it for real-world desktop and laptop upgrades where those drives fit the standard 2280 mounting pattern.
Pros and cons from a buyer’s perspective
Pros you can count on
- Secure mounting: reviews frequently mention the screws hold the SSD down firmly.
- Good “backup” value: 16 screws means you can handle at least one install plus spares.
- Simple installation: buyers report it is straightforward to use during a swap or build.
Tradeoffs to keep in mind
- Length matters: M.2 hardware is not one-size-fits-all, so this kit is best treated as an 2280-specific solution.
- Tool quality is secondary: the screwdriver is convenient, but reviews suggest it may not be your favorite tool for finer work.
Is it worth it?
If you are planning an M.2 2280 PCIe NVMe SSD install and want the missing screws solved in one purchase, this kit is a practical, low-cost add-on. It is especially worth considering if you tend to upgrade storage devices (extra screws can prevent delays later) or if you want a simple replacement option when the original screws are missing.
If you are installing a different M.2 length or your device uses a non-standard mounting approach, you will likely want a kit specifically matched to that length and standoff arrangement.
Price and availability
It is typically positioned as a budget computer-screw accessory, and availability is generally straightforward for this category. For the most current price, check the link below.
Alternatives to consider
- Brand or motherboard-specific screw kits: these can reduce the chance of length mismatch if your device uses unusual standoff positions, but they may cost more.
- Universal M.2 kits (when available): if you work with multiple SSD lengths, a broader set can be more convenient, but you still need to verify length support matches your 2280 slot.
- Replace only what you’re missing: if you already have the correct screws for your form factor, buying a full kit might be more than you need.
FAQ
Will these screws work for any M.2 SSD?
No. This kit is meant for M.2 2280 drives. If your SSD is a different length (like 2242 or 2260), you should confirm the screw length and mount position first.
Are these screws compatible with PCIe NVMe M.2 (NGFF) drives?
They are designed for PCIe NVMe M.2 (NGFF) mounting in the 2280 format, which is the typical setup for many NVMe SSDs.
What size is the screwdriver included?
The kit includes a small screwdriver for installation convenience. Reviews suggest it is fine for the job, but it is described as “just ok,” so you can use your own preferred driver if you prefer.
How many screws come in the kit?
There are 16 screws included, which is useful for one install plus spares.
What if I only need to replace one missing screw?
This kit is a straightforward replacement option because it includes enough screws to cover common mounting needs, plus extras for future upgrades.
Is this kit good for laptop and desktop upgrades?
Yes, it is intended for common DIY and upgrade scenarios where you are mounting an M.2 2280 NVMe SSD into a matching slot.
Specifications
| Product Title | m2 2280ssd Screws Kit,PCIe NVMe M.2 SSD Mounting Screws |
|---|---|
| Category | Electronics > Computers & Accessories > Computer Components > Computer Screws |
| Brand | SGTKJSJS |
| Manufacturer | SGTKJSJS |
| Item Weight | 9.07 g |
| Color | Silver/Metallic |
| Material | Stainless Steel |
| Thread Size | M2 |
| Thread Coverage | Fully Threaded |
| Fastener Size | M2 |
| Size Name | 2mm |
| Compatible Groove Diameter | 22 Millimeters |
| Number of Pieces | 16 |
| Fastener Type | Machine Screw |
| UPC | 194999247963 |
| Set Name | M.2 SSD Mounting Screws Kit |
| Number Of Items | 16 |
| Part Number | m2ls-16 |
| Model | m2ls-16 |
| Unit Count | 1 Count |
| Screw Head Style | Flat |
| Screw Point Style | Flat Point |
| Head Type | Flat |
| Thread Type | Metric |
| Set Screw Thread Type | Metric |
| Thread Style | Right Hand, Fully Threaded |
| Thread Class | 2B |
Recommended next
Bolt Dropper 502pcs Computer Screw Assortment Kit
The Bolt Dropper 502pcs Computer Screw Assortment Kit is a labeled, multi-thread screw and standoff set built for PC building and repairs. It’s a strong fit for people who want to avoid being stuck mid-upgrade, but it is not a guarantee for every niche device (some specialized systems may not match the included sizes).
400PCS Computer Screws Motherboard Standoffs Assortment Kit for Universal Motherboard
A 400-piece assortment kit aimed at DIY PC builds and repairs, covering common screws and standoffs for motherboard, SSD/HDD, fans, power supplies, and case work. It’s valued for having the right parts on hand and keeping them organized, with one recurring tradeoff: go easy on torque to help avoid stripping on smaller screws.
ASTARON PC Screws M.2 Screw Kit, NVMe Screw m.2 SSD Mounting Kit for ASUS Motherboard
If your ASUS system didn’t include the tiny M.2 (NVMe/NGFF) mounting screws, ASTARON’s kit covers common needs with 10 M2 screws/standoffs plus a magnetic screwdriver to keep installation from turning into a scavenger hunt. The main limitation is compatibility: it’s made for ASUS M.2 screw requirements, not MSI or Gigabyte.
ASTARON M.2 SSD Screws Kit, PCIe NVMe M.2 SSD Mounting Screw Kit for Asus, Gigabyte, ASRock, or MSI motherboards
A small but practical kit for installing or replacing a PCIe NVMe M.2 SSD on supported ASUS, ASRock, Gigabyte, and MSI motherboards. It includes studs of different heights, multiple screw sizes, and a magnetic screwdriver bit to make working with tiny fasteners easier.