ASTARON M.2 SSD Screws Kit, PCIe NVMe M.2 SSD Mounting Screw Kit for Asus, Gigabyte, ASRock, or MSI motherboards
Quick take
This ASTARON M.2 SSD screws kit is built for PCIe NVMe M.2 drive installs where the motherboard needs the correct standoff height and screw type. It is best for PC builders upgrading storage on compatible ASUS, ASRock, Gigabyte, and MSI boards, especially when your SSD did not include the mounting hardware. The main catch is compatibility depends on matching your motherboard’s required standoff height and whether it uses the included “snap fit” style piece.
Pros and cons
Pros
- Comes with studs of different heights and multiple screw pieces, useful when you do not know which size you will need.
- Includes a magnetic screwdriver to help install very small M.2 screws.
- Threads are described as precise, helping the SSD sit securely in the M.2 position.
- Screws are made from S2 steel with plated treatment intended to resist rust.
Cons
- Small parts, so you need careful handling during installation.
- Fit can vary by motherboard layout, so you must confirm your board’s M.2 mounting requirement (standoff height, and whether your ASUS board uses the included snap-fit style).
- Review evidence is limited on whether every piece is always included exactly as pictured.
What buyers think
Buyer-review evidence is generally positive around practical usefulness: the kit is described as easy to install, helpful when adding a second SSD, and aligned with the expected screw and standoff purpose. Several buyers specifically mention the magnetic screwdriver as a welcome addition for handling tiny screws. Reviews also highlight that the thread quality feels solid for getting the SSD mounted correctly. Evidence is too limited to draw a detailed pattern about long-term durability, but most comments focus on “works as needed” rather than major hardware issues.
What you get, and why it matters
For M.2 NVMe installs, the two things that usually determine whether the drive mounts correctly are (1) the right standoff height so the SSD PCB sits at the correct distance from the motherboard, and (2) the correct screw size and style so you can secure the drive without stripping or forcing it.
This kit is designed to cover those practical needs with multiple pieces and the intent to match common motherboard variations. It includes studs (for M.2 slot positioning) in different heights, a set of screws, a black “carabiner” piece, and a magnetic screwdriver. The screw specification is listed as M2 x 0.4 with a Phillips drive, and the material is S2 steel, described as plated to help resist rust.
Compatibility notes for NVMe M.2 mounting
This kit is aimed at PCIe NVMe M.2 SSD mounting for ASUS, ASRock, Gigabyte, and MSI motherboards. One compatibility detail to pay attention to is the way the kit’s black M.2 snap fits are intended for ASUS motherboards “without threaded holes.” That suggests your board’s M.2 mounting hardware approach (threaded vs snap-fit) can matter.
If you are replacing missing screws, also confirm the standoff height your motherboard expects. The inclusion of multiple stud heights is helpful when you are unsure, but it is still worth checking your board’s manual or existing mounting position.
Pros and cons for real-world use
Best for
- Upgraders who need replacement M.2 mounting hardware for a PCIe NVMe SSD.
- Builders working on ASUS, ASRock, Gigabyte, or MSI systems who want a kit with multiple stud heights.
- Anyone who finds tiny M.2 screws frustrating to handle, since the magnetic screwdriver is included.
Who should avoid
- Buyers who cannot confirm their motherboard’s M.2 mounting style and standoff height, since wrong fit is the most likely reason these kits do not fully solve the problem.
- People who prefer a simple “just one screw” solution, because this kit is sized for variety rather than a single replacement.
Price and availability
The kit is positioned as an inexpensive accessory item, and it is listed as in stock. Since small fastener kits can fluctuate in cost, check the live listing for the current price and piece count details.
Is it worth it?
If your PCIe NVMe M.2 SSD did not include mounting screws and you need the right standoff height and fasteners, this kit is a practical way to get it done. The magnetic screwdriver plus multiple stud heights address the most common “I just need the missing hardware” pain points. However, treat compatibility as the decision factor: verify that your motherboard’s M.2 mounting method matches what this kit is intended to support.
FAQ
What size are the screws in the ASTARON M.2 SSD screws kit?
The kit uses M2 x 0.4 screws with a Phillips drive.
Is this kit only for PCIe NVMe M.2 SSDs?
Yes, it is designed for PCIe NVMe M.2 SSD mounting on compatible motherboards.
Which motherboard brands is it compatible with?
It is intended for ASUS, ASRock, Gigabyte, and MSI motherboards that use the relevant M.2 mounting hardware style (including snap-fit approach noted for certain ASUS boards).
Does it include a tool for installing the tiny screws?
Yes, it includes a magnetic screwdriver to help hold and install the small M.2 screws.
How do I know which standoff height I need?
Check how your SSD mounts in your specific motherboard M.2 slot (or your motherboard’s manual), then select the stud height that positions the drive correctly for the screw to secure it comfortably.
Specifications
| Product Title | ASTARON M.2 SSD Screws Kit, PCIe NVMe M.2 SSD Mounting Screw Kit for Asus, Gigabyte, ASRock, or MSI motherboards |
|---|---|
| Category | Electronics > Computers & Accessories > Computer Components > Computer Screws |
| Brand | ASTARON |
| Manufacturer | ASTARON |
| Item Weight | 0.02 Kilograms |
| Material | S2 steel |
| Item Dimensions | 7.08 x 3.93 x 0.47 inches |
| Thread Size | M2×0.4 |
| Thread Coverage | Partially Threaded |
| Fastener Size | M2 x 0.4 |
| Size Name | M2 x 0.4, Flat Head, Right-hand Thread |
| Compatible Groove Diameter | 0.4 Millimeters |
| Number of Pieces | 8 |
| Fastener Type | Screw |
| Number Of Items | 19 |
| Part Number | H1147ARJYB |
| Model | H1147ARJYB |
| Unit Count | 19.0 Count |
| Screw Head Style | Flat |
| Screw Point Style | Flat Point |
| Head Type | Flat |
| Thread Type | Metric |
| Set Screw Thread Type | M |
| Thread Style | Left Hand Right Hand |
| Thread Class | 3A |
| Drive System | Phillips |
| Material Type | S2 steel |
Available variants
Number Of Items
- 19
- 10
- 46
Recommended next
m2 2280ssd Screws Kit,PCIe NVMe M.2 SSD Mounting Screws
This M.2 2280 (NGFF/PCIe NVMe) mounting screw kit is a budget-friendly way to replace missing screws or stock up before an SSD install. It includes 16 flat-head screws and a small screwdriver, with reports of a snug, no-wobble fit for common 2280 NVMe SSDs.
Bemaka 360Pcs Laptop Screws Notebook Computer Tiny Screw Kit (12 Sizes M2/M2.5/M3)
Bemaka’s 360-piece laptop screw kit is designed for people who do laptop repairs, upgrades, or DIY builds and want the right tiny fasteners on hand. The set includes 12 sizes (with an emphasis on M2, M2.5, and M3) and comes in a labeled plastic box for easier sorting, with buyer feedback pointing to good fit and helpful variety.
400PCS Computer Screws Motherboard Standoffs Assortment Kit for Universal Motherboard
A 400-piece assortment kit aimed at DIY PC builds and repairs, covering common screws and standoffs for motherboard, SSD/HDD, fans, power supplies, and case work. It’s valued for having the right parts on hand and keeping them organized, with one recurring tradeoff: go easy on torque to help avoid stripping on smaller screws.
Bolt Dropper 502pcs Computer Screw Assortment Kit
The Bolt Dropper 502pcs Computer Screw Assortment Kit is a labeled, multi-thread screw and standoff set built for PC building and repairs. It’s a strong fit for people who want to avoid being stuck mid-upgrade, but it is not a guarantee for every niche device (some specialized systems may not match the included sizes).