AITRIP 1PCS Type-C ESP32 ESP-WROOM-32 Development Board WiFi + Bluetooth CP2102 Dual Core 2.4Ghz Microcontroller
Quick take
This AITRIP ESP32 dev board combines ESP-WROOM-32 (dual-core) processing with built-in Wi-Fi and Bluetooth, plus a Type-C connection using a CP2102 USB-to-serial interface. It is well-suited to makers building connected dashboards, web servers, and sensor projects, but you should expect a learning curve if you plan to program directly in C++.
Pros and cons
Pros
- Built-in Wi-Fi and Bluetooth support for common IoT use cases (STA/AP/combined modes).
- Flexible connectivity and peripherals, including UART/SPI/I2C/PWM/DAC/ADC (plus SDIO and I2S in the supported interface list).
- Compact board with two onboard buttons (reset and programming/boot mode).
- Type-C USB with CP2102 for easier development connections than bare modules.
Cons
- Programming generally requires C++ knowledge or familiarity with the ESP32 toolchain and flashing workflow.
- Board variants can be confusing for first-time ESP32 buyers, so double-check the chip details before committing to a setup.
- Power and interface needs can vary by project, so you will want to plan your 3.3V/5V and sensor wiring accordingly.
What buyers think
Buyer-review evidence for this ESP32 board points to strong real-world versatility for sensor input, wireless connectivity, and prototyping speed. Users describe successful integration with analog inputs (including ADC-related work) and use cases like local web servers and Bluetooth-based workflows. The overall sentiment in the review snippets is positive on functionality and value, with limited but recurring friction around the practical learning curve (drivers, flashing steps, and programming basics) and some confusion when identifying which ESP32 series/chip variant they received.
What you get: an ESP32 dev board built for wireless prototyping
The core of this board is an ESP-WROOM-32 module paired with a Type-C development board layout. On the connectivity side, it targets Wi-Fi and Bluetooth projects, and it supports STA (station), AP (access point), and combined STA+AP working modes. For wireless makers, that means you can build typical “connect to my network” designs, standalone hotspot-style setups, or devices that need both behaviors.
For everyday project building, the board exposes a broad set of interfaces. That includes common microcontroller links such as UART, SPI, and I2C, and also timing and signal options like PWM plus ADC and DAC. The spec list also mentions additional interfaces such as SDIO and I2S, which can matter if you are planning to pair the board with specialized peripherals.
Key specifications that affect real projects
Processing and memory
The board is built around a dual-core 32-bit CPU and runs at 240 MHz. You also get 4 MB of storage (SPI flash, listed as 32 Mbit default).
USB connection and programming interface
USB Type-C is used for development, with CP2102 included as the USB-to-serial interface. This matters if you are trying to keep setup straightforward on a laptop and want a standard serial programming path.
Power and operating temperature
Power draw is listed at 300 mA at 3.3V, and it supports USB power (5V) as well as pin power (5.0V to 12V). The working temperature range is listed as -20°C to 85°C, which can help if you are prototyping outside or in less controlled environments.
Onboard controls and I/O convenience
Two integrated buttons are included: one for reset and another to place the module into a programming/boot mode. The board also notes 30 pins available on both sides, which is a practical detail for breadboard-friendly wiring or for connecting multiple sensors and modules without immediately adding jumpers chaos.
Best for and who should buy
- Wi-Fi and BLE/Bluetooth IoT projects: If you want a microcontroller that can connect to the internet or stream data over wireless links, this ESP32 platform fits well.
- Sensor and analog-to-digital projects: The exposed ADC and broad interface support make it easier to prototype data capture and monitoring.
- Makers who want a compact dev board: A small form factor with accessible pins can reduce wiring friction during iteration.
- Arduino-style developers: If you already build with the Arduino ecosystem or a similar ESP32-friendly workflow, this board aligns with that approach.
Who should avoid it
- Absolute beginners who only want plug-and-play: You will likely need to learn how to flash, select the correct serial/port, and program the ESP32 environment.
- Buyers who cannot tolerate “variant confusion”: If you are very new to ESP32 boards, identifying the exact chip variant can take extra steps, so plan for a bit of setup time.
Pros and cons recap
- Strong points: built-in Wi-Fi and Bluetooth, flexible I/O (UART/SPI/I2C/PWM/ADC/DAC plus more), USB Type-C with CP2102, and practical onboard buttons.
- Main tradeoff: expect time spent on programming and flashing workflow, plus a small learning curve around the ESP32 ecosystem.
Verdict: is it worth it?
If your goal is a connected ESP32 prototype with solid interface flexibility, this AITRIP Type-C ESP32 ESP-WROOM-32 development board is an accessible option, especially for Wi-Fi web projects, sensor monitoring, and Bluetooth-enabled ideas. The value will be highest for buyers comfortable learning the programming toolchain, or those using an ESP32-friendly workflow to flash and iterate quickly.
Alternatives to consider (by fit, not brand)
- If you want more “beginner-first” development: look for ESP32 dev boards that include clearer onboard documentation and a more guided flashing setup, since board-level variant identification can be a time sink for first-timers.
- If your project needs lots of analog precision or high-speed peripherals: compare boards based on exposed pins and which interfaces are actually brought out cleanly on the header, not just the headline CPU specs.
- If you only need Wi-Fi without Bluetooth: you can sometimes simplify your choice by targeting a Wi-Fi-focused MCU, but you would give up Bluetooth options that this board includes.
FAQ
- What ESP32 module is this board based on? It is an ESP-WROOM-32 module on a Type-C CP2102 development board layout.
- Does it support Wi-Fi and Bluetooth at the same time? The board supports STA, AP, and STA+AP working modes, and it includes Bluetooth capability for wireless projects.
- What programming interface does it use for connection to a computer? It uses USB Type-C with a CP2102 USB-to-serial interface.
- What I/O interfaces are available? It supports interfaces including UART, SPI, I2C, PWM, DAC, and ADC (and it also lists SDIO and I2S among supported interfaces).
- Is a learning curve expected for this ESP32 board? Yes. While there are ecosystem tools available, using the board effectively typically requires setting up drivers and understanding how to flash and program the ESP32.
Specifications
| Product Title | AITRIP 1PCS Type-C ESP32 ESP-WROOM-32 Development Board WiFi + Bluetooth CP2102 Dual Core 2.4Ghz Microcontroller Compatible with Arduino (ESP32 30P, Type-C) |
|---|---|
| Category | Electronics > Computers & Accessories > Computer Components > Single Board Computers |
| Brand | AITRIP |
| Manufacturer | AITRIP |
| Model Name | ESP32 CP2012 USB-C (Type-C) Development Board Module |
| Operating System | Linux |
| Memory Storage Capacity | 4 MB |
| Processor Speed | 240 MHz |
| Connectivity Technology | Wi-Fi, USB, UART, SPI, I2C, PWM, DAC, ADC |
| Processor Brand | Espressif |
| Wireless Compability | 802.11n |
| Compatible Devices | Arduino, other external devices with compatible communication protocols |
| RAM Memory Technology | LPDDR4 |
| Processor Count | 2 |
| Total Usb Ports | 1 |
| Smart Home Compatibility | Not Smart Home Compatible |
| Built-In Media | Type-C Interface ESP32-DevKitC-32 |
| UPC | 687117760401 |
| Warranty Description | 1 |
| Unit Count | 1.0 Count |
| CPU Speed | 240 MHz |
Available variants
Color
- 5PCS
- 3PCS
- Type-C 1PCS
- Type-C 5PCS
- Type-C 10PCS
- Type-C 3PCS
- 10PCS
- 1PCS
Recommended next
ELEGOO 3PCS ESP-32 Development Board USB-C, 2.4GHz Dual Mode WiFi+Bluetooth
The ELEGOO 3PCS ESP-32 Development Board USB-C is a compact dual-core ESP-32 board bundle aimed at fast prototyping. With integrated 2.4GHz Wi‑Fi and Bluetooth, a 240 MHz dual-core processor, and common interfaces (GPIO, UART, SPI, I2C), it’s a solid choice for low-power IoT experiments and smart-device builds.
CanaKit Raspberry Pi 5 Basic Kit (8GB RAM | NO SD Card)
The CanaKit Raspberry Pi 5 Basic Kit is a no-fuss starting point for projects that need more performance than older Raspberry Pi models. It bundles the Raspberry Pi 5 (8GB RAM), a 45W USB-C PD power supply, and heat sinks, but you will need to add storage (it does not include an SD card).
RasTech Raspberry Pi 5 8GB Kit 64GB Edition with Active review
The RasTech Raspberry Pi 5 8GB Kit bundles the essentials for a quick start, including an 8GB Pi 5 board, active cooling, a RasTech case, dual 4K micro-HDMI cables, a 27W GaN USB-C power supply, and a ready-to-use 64GB card setup. Best for makers, learners, and home projects that benefit from stronger CPU/GPU performance and steadier thermals, with the main tradeoffs being case and cooling fit-by-assembly quirks.
Arduino® UNO™ Q 4GB Hybrid Board (Qualcomm Dragonwing QRB2210 + STM32U585)
The Arduino UNO Q 4GB is a dual-brain hybrid board that blends an AI-capable Linux side with a real-time low-power microcontroller for robotics, voice, and vision-style prototypes. It offers UNO-form-factor expansion, 4 GB RAM, 32 GB eMMC, dual-band Wi‑Fi 5, and Bluetooth, but setup and power expectations can be picky for certain USB-C hubs and workflows.