39" Side Open One Cord Hider (<1/4") for Wall Mounted TV (White)
Quick take
This silicone cable raceway is designed to hide a single cord (up to <1/4") along a wall-mounted TV for a cleaner look. The side-open snap style is convenient for routing and re-stuffing cables without fully removing the track. The main caveat is that wall adhesion depends on surface smoothness, and textured or rough areas may need extra tape.
Pros and cons
Pros
- Side-open snap design makes adding or removing one cable easier.
- Made from flexible silicone, so it bends to fit a run and is easy to clean.
- Single-cord sizing is intended for TV, lamp, networking, and similar cables under 1/4".
- Designed to keep cords organized and reduce trip clutter around baby or pet areas.
Cons
- Adhesion may be inconsistent on some walls, especially if the surface is not smooth or clean.
- Not meant for thicker setups, since it’s intended for one wire under 1/4".
- Do not count on paint compatibility, since it does not support painting.
What buyers think
Buyer-review evidence is limited but consistent on two themes. Many people say it hides TV and other visible cords well and blends into white wall areas. Several reviews also highlight that it can be easy to install and that the flexible silicone track looks tidy once in place.
What this cable hider is for
The 39" side open one cord hider is meant for straight runs or gentle turns where you want a low-profile way to conceal a single cable line. It works well for common home TV cable setups, such as a power cord plus one additional cable route (for example, a streaming device cable, router cable, speaker wire, or similar), as long as the cord size stays under 1/4".
Key features that affect real-world use
Single-side opening and snap-in cable loading
The track is designed with a single side opening so you can insert or remove the cord along the run without taking the whole thing apart. This can be useful if you need to swap a cable later or tidy up a small change after mounting your TV.
Flexible silicone construction
Because the raceway is silicone, it’s designed to bend and lay more naturally than rigid channels for many wall-mount cable paths. The smooth surface is also intended to be easy to clean if dust collects along the run.
Flame-retardant silicone material
The silicone material is described as flame-retardant. That’s relevant for cord management in living spaces where you want a cable concealment solution that’s designed with basic safety in mind.
Size limits you should check first
This is not a multi-cable bundle cover. It’s intended for one wire up to <1/4", so measuring your cable thickness matters if you use thick speaker wire, larger power adapters, or bundled charging cables.
Installation, in plain terms
- Clean and dry the wall first. The adhesive performance depends heavily on surface condition.
- Measure and cut the length you need. You can cut to size, and corner fitting is described as possible with 45-degree splicing.
- Press firmly during placement. After sticking the track, gently press along the length.
- Wait about 1 hour before routing the cable fully. This helps the adhesive set.
- Use the side opening to stuff the cord into the track, then snap the opening closed.
Pros and cons for different buyers
Best for
- People mounting a TV who want one visible cable line hidden along the wall.
- Buyers who prefer a flexible, silicone look over rigid raceways.
- Households with kids or pets who want cords organized and less visually cluttered.
Who should avoid it
- Anyone trying to conceal multiple cables in the same channel.
- Shoppers with rough, textured, or difficult-to-adhere surfaces who may need an alternate mounting approach.
- Those who want to paint the track to match a custom wall color.
Value and alternatives (how to choose without guesswork)
At its core, this is a budget-friendly, single-cord concealment strip. The decision usually comes down to two questions: (1) will your cord fit under 1/4", and (2) will adhesion work on your wall type. If you’re dealing with textured walls or you want more flexibility for thicker cords, consider alternatives that are designed for larger cable widths or include more robust mounting options. For many smooth, painted walls, a silicone track like this can be a simple and visually clean solution.
Verdict
The 39" side open one cord hider is a practical choice if you have one relatively slim cord line to hide along a wall-mounted TV and you want an easy, side-access track with flexible silicone. It’s less ideal if your wall surface is rough or adhesion is likely to be unreliable, because that can impact how well the strip stays in place.
FAQ
Will this work for my TV cables?
It’s intended to hide one cable at a time, up to <1/4". If your TV cable or connector setup stays within that width, it should be a good fit for a clean wall-mounted look.
How hard is it to install?
Installation is straightforward: clean and dry the wall, cut the track to length, press it onto the surface, wait about 1 hour, then use the side opening to place the cord into the channel.
Does the adhesive work on textured walls?
Adhesion is best on smooth, clean surfaces. Textured or rough areas may not hold as well, and you may need additional tape or a different mounting method.
Can I paint the silicone cable hider?
Painting is not supported for this silicone strip, so plan on it staying as its provided color.
Can I remove and re-route a cable later?
Yes, the side-open snap design is made for easier access, so you can open the side and add or remove the cable without taking down the entire track.
Specifications
| Product Title | 39" Side Open One Cord Hider (<1/4") for Wall Mounted Tv,Silicone Flexible Cable Cover to Hide Conceal Cords Along Wall,Wire Raceway Management Cable Concealer Channel,Electric Cord Organizer,White |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Raceways |
| Brand | KNEELISA |
| Manufacturer | KNEELISA |
| Color | White |
| Material | Silicone |
| Product Dimensions | 39"L x 39"W |
| Indoor Outdoor Usage | Indoor |
| Number of Pieces | 1 |
| UPC | 635407432682 |
| Unit Count | 3.25 Feet |
| Enclosure Material | Silicone |
| Item Dimensions L x W | 39"L x 39"W |
| Style Name | Compact |
| Style | Compact |
Available variants
Color
- White
Size
- Small-78"
- Large-78"
- Small-39"
- Large-39"
- Large-118"
- Small-118"
Recommended next
Under Desk Cable Management Tray No Drill, Metal Mesh Cable review
This no-drill under-desk cable management tray from Litwaro uses a clamp mount and a 2-hole mesh design to keep power strips, adapters, and cable runs off the floor. It’s best for flat-edge desks in the 0.4 to 2 inch thickness range, and the main tradeoff is fit: awkward or non-flat desk edges may limit how securely it clamps.
A+ ELECTRIC Cord Cover Full Kit, 26ft/315in Self-Adhesive Cable Raceway, 20 Snap-On Channels, Wire Hider for TV, HDMI & Speaker Cables, Includes Connectors & Corners, Paintable Cable Management, White
The A+ ELECTRIC 315-inch self-adhesive cord cover kit is a long-run cable raceway built for tidy TV setups and other home entertainment wiring. Buyers like the snap-on channels, easy routing with multiple connector types, and the option to strengthen adhesion with included screws and anchors, with the main caveat being that very textured walls may need the screw-and-anchor approach.
ZhiYo Cord Cover Wall Kit, 94.5in Cord Hider Wall Mounted TV
A self-adhesive, paintable cable raceway kit built to hide 2 to 3 TV-related cords along the wall for a cleaner look and safer cord management. The tradeoff is that the adhesive is unforgiving, and tape is not meant for textured walls.
Delamu Cord Hider, 100in Self-Adhesive Cord Cover Kit for Wall review
The Delamu CC11 cord hider kit is a paintable, self-adhesive cable raceway designed to conceal 2 to 3 standard cords for wall-mounted TVs and electronics. It installs without drilling, but the adhesive is strong, so planning and precise placement matter.