ZhiYo Cord Cover Wall Kit, 94.5in Cord Hider Wall Mounted TV
Quick take
The ZhiYo 94.5-inch cord hider wall kit is a paintable PVC cable raceway system that uses pre-applied double-sided tape to conceal up to 2 to 3 cords along your wall, including corners and turns with included connectors. It is a good fit for flat, smooth wall surfaces, but tape alignment is critical, and tape is not recommended for textured walls.
Pros and cons
Pros
- 94.5-inch total run with 6 straight raceway pieces (15.7-inch each) plus corner and T-connector accessories for common TV cord paths.
- Self-adhesive installation with pre-applied double-sided tape, no drilling required on suitable surfaces.
- Paintable PVC, allowing you to match the cable cover to your wall color.
- Designed for slim cord bundles, sized to hide 2 to 3 cords (raceway opening 0.98 inch wide x 0.5 inch tall).
Cons
- Tape placement is unforgiving, and removal may pull up paint or leave wall marks.
- Tape cannot be used on textured walls, wallpaper, or delicate finishes (nails or screws are recommended instead, though fasteners are not included).
- Connector coverage may leave small visible gaps where sections meet, depending on your route and cuts.
- If you paint over the installed channel, removing it later may be difficult.
What buyers think
Buyer-review evidence points to a generally clean, organized result once installed, with multiple reviewers calling out that the pieces are easy to cut and install. The most consistent installation theme is that the adhesive is strong, which helps the kit stay put, but also means you should take extra care with positioning because adjusting after contact can damage the wall or the product. There are also mentions that the cover may not be fully seamless at every join, and that painting can affect later removal.
Who this cable raceway kit is for
This kit is built for straightforward TV cord management along walls, especially when you want a low-profile look without drilling. The included routing parts, like flat elbows and T-connector pieces, help when your cord run changes direction near outlets, the TV bracket, or media consoles.
- Best for: wall-mounted TVs where you need to hide slim power and signal cords in a tidy straight-line path with a couple of corners.
- Wall type considerations: ideal for smooth, clean, solid surfaces where tape bonds reliably.
- Color matching: useful if you plan to paint the channel to blend with your wall.
Key specs that affect fit
- Total length: 94.5 inches (6 pieces, each 15.7 inches).
- Raceway opening size: about 0.98 inch wide x 0.5 inch tall, intended to hide roughly 2 to 3 cords.
- Material: PVC rated UL94 V-0 for flame resistance.
- Installation method: self-adhesive with pre-applied double-sided tape.
- Included accessories: 3 couplings, 2 flat elbows, 1 T-connector, and an inside and outside elbow (for turn and corner routing).
Installation and routing tips that prevent common problems
If you want the cleanest look, the main thing to nail down is layout planning before you press the tape down.
1) Plan your path and test-fit dry
Measure your wall run, then dry-fit the straight sections and connectors along your intended route. This helps you avoid cutting too short or ending up with joins in highly visible areas.
2) Press firmly on the exact placement, the first time
The tape is designed to bond strongly, which is great once it is correct, but it also makes repositioning risky. Align carefully, then press along the channel to ensure consistent contact.
3) Avoid tape on textured or delicate surfaces
If your wall has texture, wallpaper, or a delicate finish, plan on using nails or screws for installation (fasteners are not included). Tape is meant for dust-free, smooth, solid surfaces.
4) Painting: think about future changes
Because the system is paintable and some buyers report that removal after painting may not be practical, it is smart to paint only when you are confident about the final route.
Pros and cons, in plain terms
Why it works well: The kit gives you most of what you need to build a clean TV cord run, including connectors for turns and junctions, and the PVC channel is paintable so it can visually disappear against your wall. For smooth walls, the tape-based setup is quick.
The main tradeoffs: Adhesive strength is a double-edged sword. You will want to take your time with alignment, and you should not treat tape as a flexible repositioning adhesive. If later changes are likely, consider either installing with mechanical fasteners or waiting to paint until your layout is final.
Verdict: is it worth buying?
The ZhiYo 94.5-inch cord cover wall kit is a strong choice if you want an easy, drill-free way to hide a small cluster of TV cords along a smooth wall, and you are willing to be careful with tape placement. It is less ideal if your wall is textured or you expect to remove the channel later, especially after painting. For most clean, straight TV cord runs with a few corners, it offers a practical balance of coverage, routing parts, and a low-profile look.
Price and availability
Pricing and in-stock status can change. Buy on Amazon.
FAQ
How many cords can the ZhiYo wall cord hider hide?
It is sized to hide approximately 2 to 3 cords, based on the raceway opening dimensions (about 0.98 inch wide x 0.5 inch tall).
Can I install it on textured walls or wallpaper?
Tape installation is not recommended for textured walls or wallpaper. For those surfaces, nails or screws are recommended (not included).
Is it hard to cut to the right length?
Buyers generally describe it as easy to cut and install. Planning your route first helps you get the length right before you commit the adhesive.
Can I paint the cable cover to match the wall?
Yes, the PVC channel is paintable and designed to blend with your wall color. Keep in mind that once painted, removal later may be difficult.
Does it look seamless at every corner and join?
Some buyers note that join areas near couplings and connectors may show small gaps depending on how the pieces meet. Accurate cutting and tight placement can help, but a perfectly invisible seam is not always guaranteed.
What’s included in the kit besides the straight cable raceways?
It includes multiple connectors for turns and junctions, including couplings, flat elbows, a T-connector, and inside and outside elbow pieces, along with the raceway sections for the main run.
Specifications
| Product Title | ZhiYo Cord Cover Wall Kit, 94.5in Cord Hider Wall Mounted TV, Self-Adhesive Wire Covers for Cords, Paintable Wire Hiders Cable Raceway Kit, Cable Concealer, 6 x L15.7in W0.98 H0.5in, Black |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Raceways |
| Brand | ZhiYo |
| Manufacturer | ZhiYo |
| Color | Black |
| Material | Polyvinyl Chloride |
| Product Dimensions | 15.7"L x 0.98"W |
| Number of Pieces | 6 |
| Unit Count | 1.0 Count |
| Warranty Description | 1 year |
| Enclosure Material | Polyvinyl Chloride |
| Item Dimensions L x W | 15.7"L x 0.98"W |
| Installation Type | Self-Adhesive |
| Style Name | Modern |
| Style | Modern |
Available variants
Size
- 1in W X 0.5in H X 95in L
- 1.2in W X 0.6in H X 102in L
- 1in W X 0.5in H X 204in L
- 1.2in W X 0.6in H X 153in L
Color
- Grey
- White
- Beige
- Black
Recommended next
TV Cable Hider - 62.8in PVC Cord Hider Cable Management Wall (YCLYC)
A paintable, wall-mounted PVC cord cover kit designed to hide up to about 3 to 4 cables per run. It uses double-sided adhesive for quick installs and comes as four sections totaling 62.8 inches, but adhesion is not intended for rough or textured walls and removal can damage surfaces.
YesBes 116in Cord Hider Kit, Cord Covers for Wires on Wall
The YesBes 116in cord hider kit is a self-adhesive, paintable cable raceway system designed to clean up wall-mounted TV and low-to-the-wall wiring. With 116 inches of channel coverage (0.96 in wide by 0.57 in tall internal dimensions) and included connectors, it’s geared for tidy cable runs, but it does require a smooth mounting surface for best adhesion.
15.7” Under Desk Cable Management Tray, No Drill Steel Cable review
A compact, clamp-mounted under-desk steel tray designed to tidy power strips and reduce cable clutter without drilling. Best for small desk setups who want quick installation, but it may not be wide enough for larger surge protectors or dense power brick layouts.
EVEO Cable Hider Wall - 153" Wall Cord Hider (White)
The EVEO Cable Hider Wall is a self-adhesive cable raceway designed to conceal messy cords along baseboards, desks, or behind a wall-mounted TV. It’s cuttable, paintable, and uses a snap-on cover, making it a practical way to improve both the look and day-to-day safety of exposed cables, with the main tradeoff being how strongly the adhesive bonds to the wall.