Delamu Cord Hider, 100in Self-Adhesive Cord Cover Kit for Wall
Quick take
The Delamu CC11 cord hider kit uses a peel-and-stick approach to conceal 2 to 3 standard cords along a wall, aiming for a clean, enclosed look for wall-mounted TVs and nearby electronics. It is paintable and can be cut to fit, but the adhesive is described as very strong, so careful measuring and route planning helps avoid wall damage during repositioning.
Pros and cons
Pros
- Designed for concealing 2 to 3 standard power/AV/network style cords in one raceway.
- Self-adhesive installation with a hinge-like hinged cover design that snaps closed.
- Paintable, flexible PVC raceway that can be cut to length.
- Enclosed cover helps keep cables off the floor (useful for trip prevention and keeping cords away from curious hands).
Cons
- Adhesive strength is a tradeoff, repositioning later can risk wall surface damage.
- Long runs may be harder to keep perfectly straight during installation.
- Expect a primarily surface-cosmetic solution, it is not meant to add structural strength to joints.
What buyers think
Buyer-review evidence is generally consistent on a few practical points. Many shoppers describe the kit as easy to use and resulting in a neater, more finished appearance for cord clutter. The paintable material is frequently mentioned as workable for matching wall color, though some recommend painting pieces before installation. Installation feedback often highlights the adhesive, with users calling it very sticky and cautioning that full removal can harm the wall if you need to reposition. Coverage and fit are also discussed, with some buyers noting the track length can be challenging to keep straight over longer routes, and that the included connectors and end pieces mainly improve appearance rather than providing major joint strength.
What this cord hider kit is for
This is a wall-mounted cable raceway kit built to hide multiple cords in a single, enclosed channel. It is a practical fit when you want to clean up visible runs from a TV to the outlet, as well as nearby electronics like a router, game console, lamp, or similar devices. The enclosed design is aimed at keeping cords off the floor and reducing access for pets and kids who might otherwise grab loose cables.
How it installs (and where people get tripped up)
The core installation method is self-adhesive, you peel and stick the raceway onto clean, flat wall surfaces, then snap the hinged cover into place. That no-drilling approach is the main reason shoppers choose kits like this, especially if you are trying to keep the project simple.
Big practical caveat: reviewers frequently stress that the adhesive is very strong. If you are not confident in your measurements or route, you may want to dry-fit, map the path carefully, and commit to placement before pressing it down fully. If you do need to remove it later, slow peeling or careful separation is often recommended, but full removal can still damage paint or drywall surfaces.
Cut to fit, paint to match
The raceway is described as paintable PVC, and it is also cuttable to achieve a custom length. A common workflow recommendation in reviews is to paint pieces before applying them to the wall, which can make for cleaner color matching. This approach is helpful if your wall color is important for the “invisible” look.
Cable capacity and fit expectations
This kit is intended to conceal 2 to 3 standard cords within a channel sized about 0.95 in wide and 0.55 in high. If your setup involves bulkier cables, stiff power bricks, or thicker-than-average connectors, you may need to evaluate whether the cords will sit comfortably inside the channel once the cover snaps on. The kit is also accompanied by components for corners and joints, which can improve how the run looks, even though those joint pieces are not meant to add major physical strength at seams.
Pros and cons (expanded)
When it’s a good match
- You want a no-drill way to tidy wall-mounted TV and media-area cords.
- Your cables are fairly standard in thickness and you want them grouped in a single raceway.
- You plan to paint the raceway to blend into the wall color.
- You value an enclosed cover for keeping cables contained and less accessible.
When you should consider other options
- Your wall surface is not ideal for adhesive placement (rough texture, heavy texture paint, or you expect to reposition often).
- You are building a very long, complex route where alignment needs to stay perfectly straight.
- You need something that is designed primarily for structural routing rather than cosmetic cable concealment.
Verdict
The Delamu CC11 cord hider kit is a strong option for people who want a clean, paintable, enclosed cable raceway for wall-mounted electronics, especially when you are comfortable planning your adhesive placement up front. If your cables match the intended capacity and you want a relatively straightforward upgrade from visible cords to a more finished look, this kit is worth considering, with adhesive strength and straight-run alignment being the main tradeoffs to keep in mind.
View it as a quick “worth it” checklist
- Yes, worth it if: you have 2 to 3 standard cords to conceal and you want a no-drill, paintable raceway for a TV or entertainment setup.
- Think twice if: you might need to reposition frequently, your wall finish is delicate, or your cables are unusually thick at the connectors.
FAQs
How many cords does the Delamu CC11 cord hider kit fit?
It is designed to conceal 2 to 3 standard power/AV/network style cords in one channel.
Is it possible to cut the cord cover to the length I need?
Yes. The raceway is cuttable (for example with scissors or a utility knife) so you can size it to your run.
Does the cord hider require drilling?
No. It installs using a self-adhesive backing and a snapping/hinged cover that closes over the cables.
How paintable is it for matching a wall color?
The PVC raceway is described as paintable, and some users recommend painting pieces before installation for a cleaner match.
Will the adhesive damage the wall if I need to remove it?
The adhesive is described as very strong, so removal or repositioning can risk damaging paint or drywall surfaces. Planning your route carefully before pressing it down fully can reduce the need for removal.
Is this good for hiding TV power cords only?
It is meant for bundling and hiding multiple standard cords together, which can include TV power along with other nearby cables like AV and network connections.
Specifications
| Product Title | Delamu Cord Hider, 100in Self-Adhesive Cord Cover Kit for Wall Mounted TV, Paintable Wire Hider, Flexible Cable Management System, Cable Raceway Conceals 2-3 Wires, W0.95 H0.55in, White |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Raceways |
| Brand | Delamu |
| Manufacturer | delamu |
| Model Number | CC11 |
| Color | White |
| Material | Plastic |
| Number of Pieces | 1 |
| Unit Count | 1.0 Count |
| Warranty Description | No |
| Enclosure Material | Plastic |
| Installation Type | Self-Adhesive |
| Style Name | Self-Adhesive |
| Style | Self-Adhesive |
Available variants
Color
- White
- Black
- Beige
Size
- 100in x 0.59in x 0.40in
- 100in x 0.95in x 0.55in
- 236in x 0.59in x 0.40in
- 236in x 1.18in x 0.60in
- 236in x 0.95in x 0.55in
- 100in x 1.18in x 0.60in
Recommended next
EVEO Cable Hider Wall - 153" Wall Cord Hider (White)
The EVEO Cable Hider Wall is a self-adhesive cable raceway designed to conceal messy cords along baseboards, desks, or behind a wall-mounted TV. It’s cuttable, paintable, and uses a snap-on cover, making it a practical way to improve both the look and day-to-day safety of exposed cables, with the main tradeoff being how strongly the adhesive bonds to the wall.
Legrand Wiremold Cable Management Kit, CordMate II, Cord Organizer and Hider, Cord Cover, Concealer, and Protector for Wall, Medium Capacity, CMK50
The Legrand Wiremold CMK50 CordMate II kit is a self-adhesive cord cover system designed to hide multiple low-voltage and AV cables along walls and around entertainment setups. Buyers like how clean the finished look is and how easy it is to cut and install, with the main tradeoff being adhesive removal risk (paint can lift) and the need to plan placement for level, secure bonding.
15.7” Under Desk Cable Management Tray, No Drill Steel Cable review
A compact, clamp-mounted under-desk steel tray designed to tidy power strips and reduce cable clutter without drilling. Best for small desk setups who want quick installation, but it may not be wide enough for larger surge protectors or dense power brick layouts.
Delamu Cord Hider, 157in Wire Covers for Cords on Wall
The Delamu Cord Hider (157-inch wall-mounted cable raceway) is designed to conceal 2 to 3 cords in a clean, paintable channel. It installs with an attach-and-snap design and can use adhesive tape or screws, but the adhesive tape is strong enough to risk paint damage if you remove it later.