Under Desk Cable Management Tray No Drill, Metal Mesh Cable review
Quick take
This no-drill under-desk cable management tray uses a clamp mount and a carbon steel, metal mesh basket to keep power strips, adapters, and cords organized out of the way. Buyers highlight the quick setup and a cleaner look underneath the desk, with the biggest caveat being compatibility: it fits flat-edge desks roughly 0.4 to 2 inches thick.
Pros and cons
Pros
- No-drill installation with side clips that clamp to the desk edge.
- Built-in soft rubber pads help protect the desk from scratches.
- Two-hole pass-through design keeps cable routing tidy and off the floor.
- Carbon steel build with an estimated capacity of about 15 lbs.
Cons
- Desk fit is limited to flat edges around 0.4 to 2 inches thickness.
- Some setups may find components fit a bit tight if your adapters and power strips are bulkier.
- Clamp mounting relies on the desk edge shape, so an “awkward” desk may not be ideal.
What buyers think
Buyer-review evidence points to a consistent theme: setup is straightforward and fast, with many people clamping it on in minutes and then using it immediately to corral surge protectors, power adapters, and cable runs. Reviews also commonly mention that it improves the underside appearance by reducing dangling cords, and that the tray feels stable once mounted. There is also some limited but relevant feedback that spacing inside the basket can feel snug for larger power strips or adapters, suggesting a need to check component dimensions before installing.
What this under-desk tray is for
If your standing desk area looks messy from underneath, a clamp-on cable tray can help by moving the “heavy stuff” (power strips, USB hubs, transformers, and adapters) off the floor and into a dedicated space. This model is designed around a mesh basket plus two-hole sides, so cords can pass through cleanly instead of bunching up where your feet and vacuum cleaner would otherwise hit them.
Key features that matter for real desk setups
No-drill clamp mounting (and why it matters)
You do not need to drill holes to install this tray. The approach uses side clips that clamp to the desk edge and then secure the basket, with the option to mount inwards or outwards depending on your layout. This is a practical choice for renters, shared offices, and anyone who wants a reversible upgrade.
Rubber pads for desk protection
The clamp includes soft rubber pads intended to reduce the chance of scratches on your desktop. If you have a finished wood or laminate surface, that small detail can help preserve the desk edge where the tray grabs.
2-hole pass-through design to keep cables from tangling
The wire basket uses two holes on each side to let cables route through while keeping them from spilling back out into the cable pile. The mesh design is also intended to resist dust buildup more than fully enclosed trays.
Material and load capacity
It’s made from carbon steel, with an estimated load of about 15 lbs. That makes it more aligned with organizing typical desk power accessories than storing anything bulky.
Fit range for desk thickness
This cable tray is intended for desks with a flat edge between 0.4 inches and 2 inches. If your desk edge is thicker than that or not flat, clamp stability may be the first thing to check.
Pros and cons in plain terms
Who it’s best for
- People who want cable management under a desk without drilling.
- Anyone using a surge protector plus multiple adapters (the tray is built for organizing power accessories and cable runs).
- Setups where you want cords kept away from foot traffic and the vacuum path.
Who should avoid it
- Shoppers with desks outside the stated 0.4 to 2 inch flat-edge thickness range.
- Anyone whose desk edge is uneven or unusually shaped, where clamping may not sit securely.
- Buyers expecting a tray that automatically accommodates very large power strips and bulky adapters without any snug fit.
Installation and setup expectations
Expect a quick setup process: clamp the tray to the desk edge, route cables through the side openings, then secure the excess inside the basket. Many buyers describe the setup as easy and workable even when installing solo. For the best results, plan your cable routing first, then load the tray gradually so you can confirm the tray sits firmly before fully organizing everything.
Price and availability
This model is positioned as an affordable no-drill cable management accessory compared with many more involved mounting solutions. If you are considering a higher-priced system, the question is whether you need more mounting options than a clamp-based tray provides, or whether your desk fit falls within the 0.4 to 2 inch range.
Verdict: is it worth it?
If your goal is simple under-desk organization, this tray is a strong fit, especially if you have a flat-edge desk and want to avoid drilling. The clamp mount and rubber pads address the most common buyer concerns with under-desk add-ons, and the two-hole mesh design is built for tidy cable routing. The main reason it would not be a great purchase is compatibility, if your desk thickness or edge shape falls outside the intended range or if your adapters and power strip are too large for the basket.
FAQ
What desk thickness does this under desk cable tray fit?
It’s intended for flat-edge desks with a thickness range of about 0.4 inches to 2 inches.
Does it require drilling?
No. It installs using a clamp mount with side clips.
Will it protect my desk from scratches?
It includes soft rubber pads on the clamp to help protect the desk surface where the tray attaches.
What kinds of items can I store in the tray?
It’s designed to organize common desk power components like outlet strips, USB hubs, and computer power adapters, plus to route data cables through the side pass-through holes.
Is the basket deep enough for surge protectors and adapters?
It should work for typical desk power accessories, but some buyers note that fit can feel snug if your components are larger than average, so it’s smart to check your power strip and adapter dimensions.
Specifications
| Product Title | Under Desk Cable Management Tray No Drill, Metal Mesh Cable Management Under Desk with Clamp Mount, 2 Hole Cable Tray with Wire Management and Cord Organizer for Home Office Standing Desk |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Raceways |
| Brand | Litwaro |
| Manufacturer | Litwaro |
| Model Number | BJXCJ_01 |
| Color | Black |
| Material | Carbon Steel |
| Brand Name | Litwaro |
| Manufacturer Warranty Description | 1 year |
| Manufacturer Part Number | BJXCJ_01 |
| Unit Count | 1.0 Count |
| Item Type Name | Under Desk Cable Management |
| Material Type | Carbon Steel |
| Style Name | Modern |
| Required Assembly | No |
| Assembly Required | No |
| Style | Modern |
Available variants
Size
- 32"
- 13.38"-2 pack
- 15.75"
- 25"
- 13.38"
- 13.38"-3pack
Color
- Black
- White
Recommended next
YCLYC TV Cord Hider (39 in cord covers for wall-mounted TVs)
The YCLYC TV Cord Hider is a PVC cable raceway kit designed to cover power and signal cables along a wall. It supports multiple cables, uses an adhesive-based installation, and includes paintable housing for blending into your space, with the main caveat being that the tape may not hold on textured or dusty surfaces.
Under Desk Cable Management Tray White, Cinati Wire Organizers No Drill, Cable Tray with Clamp
The Cinati under-desk cable management tray uses a clamp-on design (no drilling) to keep power strips and cables off the desk and floor. It’s a solid metal tray with anti-scratch pads, simple setup, and guidance accessories, but buyers should note limited accessibility and tray placement can feel a bit low for some desks.
EVEO Cable Hider Wall 306”
The EVEO Cable Hider Wall 306” is a slim, paintable wall cord cover designed to conceal and organize TV and entertainment wiring. It’s easy to install with self-adhesive options or screws, but you’ll want to plan placement carefully because strong adhesive can make relocation tricky.
Delamu Cord Hider, 157in Wire Covers for Cords on Wall
The Delamu Cord Hider (157-inch wall-mounted cable raceway) is designed to conceal 2 to 3 cords in a clean, paintable channel. It installs with an attach-and-snap design and can use adhesive tape or screws, but the adhesive tape is strong enough to risk paint damage if you remove it later.