Under Desk Cable Management Tray White, Cinati Wire Organizers No Drill, Cable Tray with Clamp for Wire Management
Quick take
This clamp-on under-desk cable management tray helps clean up messy cables by holding a power strip and routing cords neatly off the desk and floor. It’s designed for quick setup without drilling, using anti-scratch clamp pads. The main caveat is that access to the tray can feel slightly awkward until your setup is dialed in.
Pros and cons
Pros
- No-drill clamp design attaches to your desk frame (ideal if you do not want holes).
- Metal, fully welded and powder-coated build is made to resist rust and handle daily use.
- Anti-scratch mats on the clamps help protect desk surfaces like wood or glass.
- Includes cable clips and cable ties for routing and keeping cords in place.
- Capacity is rated up to 10 lb, suitable for many power strips.
Cons
- Accessibility can be limited once installed (reaching in under the desk may take getting used to).
- Fits only desks within the supported thickness range, so desk measurement matters.
- Tray placement can end up a bit low depending on your desk frame and mounting position.
What buyers think
Buyer-review evidence emphasizes setup speed and overall “it just makes the area look cleaner” results. Many reports highlight that installation is straightforward, typically taking only a few minutes, and that the tray feels sturdy for everyday cable organization. Users also mention the clamps have felt or anti-scratch protection, and that the tray can be oriented based on how you want cables routed (inward or outward). A recurring theme is that once the tray is in place, it helps keep cables and a connected power strip off the desktop and floor. The main repeated caution is practical usability, some buyers note that the tray hangs a bit lower than expected or that reaching access is not as convenient as cable ties alone.
What it is and how it helps
The Cinati under-desk cable management tray is a metal wire organizer meant to mount underneath your desk using clamps rather than screws or holes. Once attached, it provides a “home base” for a power strip and helps you guide individual cords using the included clips and cable ties. For many setups, that means fewer cables draped near your feet, less clutter at desk level, and a more deliberate routing path from outlets to devices.
Key features that matter for buying
No-drill clamp mounting for desk-friendly installation
If you want under-desk cable organization without altering your desk, the clamp-on approach is the big selling point. The clamps attach directly to the desk frame material, and the setup is designed to be adjustable, so you can change the position rather than committing to a fixed hole layout.
Anti-scratch pads to help protect desk surfaces
The clamp system includes anti-scratch mats intended to reduce wear marks on contact points. That matters if you have a polished wood finish, glass panels, or simply want to avoid clamp metal directly contacting the desk.
Metal tray built for durability and less rust risk
The tray is made from sturdy, fully welded metal with a powder-coated finish. That combination is usually chosen for under-desk accessories that see daily vibration, cable tugging, and long-term exposure to dust, so it aims to stay stable rather than warp or degrade quickly.
Capacity and size considerations
It supports up to 10 lb, and the internal tray size is listed as 13.4 in (L) x 4.6 in (W) x 3.1 in (H). The intended use is for organizing data cables and power cords, including power strips that fit within that footprint. Before buying, measure your power strip length and compare it to the tray’s internal dimensions, and also confirm your desk thickness fits the supported range (0.4 in to 2.4 in).
Inward or outward mounting for routing flexibility
The tray opening can be mounted inward or outward, which helps you decide where cables will exit relative to your desk underside. This is useful if you prefer cables to angle toward the back of the desk (often cleaner for foot traffic) or toward the front (sometimes easier for quick access).
Pros and cons for different desk setups
Best for
- People who want cable organization under a desk without drilling holes.
- Workspaces where a power strip needs to stay off the floor and away from foot-level clutter.
- Desks with thickness in the supported range, and frame surfaces that can hold a clamp securely.
- Anyone willing to route cables with ties and clips for a neater, longer-lasting cable layout.
Who should avoid it
- If you need frequent, one-handed access to the power strip or adapter area, the under-desk placement can feel less convenient.
- If your desk thickness falls outside 0.4 in to 2.4 in, the clamps may not fit as intended.
- If your main goal is hiding every cable completely with zero visibility, a tray plus clips still requires thoughtful routing.
Ease of installation and included accessories
The kit includes 1 cable tray, 4 cable clips, and 6 cable ties, which helps you finish setup without purchasing extra small parts. Installation is generally described as quick, and many buyers mention everything fit properly with only minor assembly steps. The cable clips are designed to guide wires so they do not slip around inside the tray, while the ties help bundle and keep individual runs from drifting.
Verdict
The Cinati under-desk cable management tray is a practical choice if you want clamp-on cable organization that avoids drilling. Its metal build, anti-scratch clamp pads, and included routing accessories make it a straightforward way to clean up both power and data cable clutter. It is not ideal if you want highly convenient access after installation or if your desk thickness is outside the supported range, but for most desk setups within spec, it can be an easy, noticeable upgrade.
FAQ
Does this under desk cable management tray require drilling holes?
No. It uses a clamp-on installation that attaches to your desk frame without drilling.
Will it work on glass or thicker desks?
The clamps include anti-scratch pads intended to protect surfaces like glass and wood. It is designed for desks with a thickness range of 0.4 in to 2.4 in, so you should measure before ordering.
What is the weight capacity?
The tray has a rated capacity of up to 10 lb.
What comes in the box?
You get 1 metal cable tray, 4 cable clips, and 6 cable ties.
How do you mount it, inward or outward?
The design supports mounting so the opening can face inward or outward based on how you want cables routed underneath your desk.
Specifications
| Product Title | Under Desk Cable Management Tray White, Cinati Wire Organizers No Drill, Cable Tray with Clamp for Wire Management, Cord Organization Box for Office, Home - No Damage to Desk |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Raceways |
| Brand | Cinati |
| Manufacturer | Cinati |
| Color | White |
| Material | Metal |
| Product Dimensions | 13.4"L x 4.6"W |
| Number of Pieces | 1 |
| Unit Count | 1.0 Count |
| Warranty Description | 2 year manufacturer |
| Enclosure Material | Metal |
| Item Dimensions L x W | 13.4"L x 4.6"W |
| Installation Type | Clamp |
| Style Name | Modern |
| Style | Modern |
Available variants
Color
- White
- Black
Size
- 25"-1 Pack
- 13.4"-4 Pack
- 16"-2 Pack
- 13.4"-2 Pack
- 13.4"-1 Pack
- 16"-1 Pack
Recommended next
ECHOGEAR TV Cord Hider for Wall Mounted TV (White)
The ECHOGEAR TV cord hider is a DIY cable pass-through kit that lets you route low-voltage A/V cables behind drywall for a cleaner wall-mounted setup. It includes two pass-through grommets, locking brackets, and a hole-saw drill attachment for cutting tidy grommet holes, with a paintable finish to help the openings blend in.
Delamu Cord Hider, 157in Wire Covers for Cords on Wall
The Delamu Cord Hider (157-inch wall-mounted cable raceway) is designed to conceal 2 to 3 cords in a clean, paintable channel. It installs with an attach-and-snap design and can use adhesive tape or screws, but the adhesive tape is strong enough to risk paint damage if you remove it later.
YECAYE 6 Pack Cable Management, Cord Organizer, Cable Organizer, Adhesive Mount Cord Organizer for Desk, No-Drill Desk Wire Management for Home Office, Baby proofing, Black
The YECAYE 6 pack desk cable management kit uses self-adhesive, J-channel raceways to hide and organize power and low-voltage cables under a desk or along a wall. It is designed for easy cable add or removal with an outward-facing opening, but it works best on smooth, even surfaces where the adhesive can bond reliably.
Legrand – OnQ in-Wall Cable Management Kit for Power & Low Voltage Cords (HT2102WHV1)
The Legrand On-Q HT2102WHV1 is an in-wall retrofit kit that combines a recessed power outlet with a brush-plate pass-through for TV and display cables. It’s a strong fit for buyers who want a cleaner wall-mounted setup, but it is still a real electrical-in-wall project and requires careful planning for where cables exit.