Legrand – OnQ in-Wall Cable Management Kit for Power & Low Voltage Cords (HT2102WHV1)
Quick take
The Legrand On-Q HT2102WHV1 is an in-wall retrofit kit that pairs a recessed 15A outlet with a brush-plate pass-through to neatly route common TV cabling behind the wall. It’s best for wall-mounted TVs or displays where you want a cleaner look and organized access to cords, but you should be ready for a DIY electrical rough-in and planning for how the HDMI and other low-voltage cables will exit the wall on the other side.
Pros and cons
Pros
- Recessed power outlet plus a low-voltage cord pass-through in one kit.
- Brush-plate design helps control how cables move and keeps them from slipping back inside.
- Supports up to 2 power devices and up to 10 low-voltage cords through the brush opening.
- Designed for DIY retrofit installs using standard tools, with a cutout template included.
Cons
- It’s an in-wall electrical installation, so buyers without outlet wiring experience should consider professional help.
- You still need a good path for cables on the far side of the wall if you are routing to a credenza or similar furniture.
- Not smart-home compatible, so it will not add any automated features.
What buyers think
Buyer feedback emphasizes that this kit delivers a cleaner, more “finished” look behind wall-mounted TVs and similar setups, especially by reducing visible cords. Many reviewers describe the overall build as substantial and the installation as straightforward with basic tools, noting the included template and that the unit can help create a pro-style result with a minimal wall footprint. A recurring theme is that the brush opening and internal cord support make it easier to manage and keep common HDMI and audio cables accessible rather than letting them disappear into the wall. Review evidence is limited to a small set of themes, but overall it points to practical usability for people who want organized power plus low-voltage routing in a single recessed box.
What this kit actually does (and what it hides)
This is a retrofit-style in-wall TV connection kit that combines two jobs in one recessed assembly:
- Power outlet storage: The kit includes a recessed duplex outlet rated for 15A at 125V, letting you mount a TV power connection without dangling cords below the screen.
- Low-voltage cord pass-through: The brush plate opening is meant to route common entertainment cables behind the wall, with the goal of keeping HDMI, Ethernet, and audio cables organized and out of sight while still accessible.
The brush-plate design is also intended to help prevent cables from slipping too far back inside the wall, which matters when you need to connect or disconnect devices later.
Key specs that affect buying decisions
Compatibility and capacity
- Low-voltage capacity: Up to 10 low-voltage cords through the brush plate pass-through.
- Power outlet count: 2 total outlets (standard duplex arrangement).
- Included outlet type: A 15A tamper-resistant duplex receptacle is included.
Physical fit
- Drywall cutout size: 7.25 inches by 5.5 inches.
- Color/material: White plastic.
- Internal recessed design: The unit is recessed to create room for male plug connectors so they sit properly behind the wall.
Electrical safety note
The kit is UL Listed, but it still must be wired to an existing electrical source for safe operation. If you plan to DIY, make sure you are comfortable with in-wall outlet wiring and code requirements in your area.
Installation experience, what to expect
Installers and DIYers typically like this kit because it’s presented as a retrofit solution and includes a cutout template. Several buyers mention they got the job done in around the 30-minute range with basic tools, especially when tying into existing wiring paths. The most important practical detail is that you need to plan the cable route early, because the kit only solves the “where the cords go behind the wall” part, not the entire cable-management strategy from source devices to your TV location.
One common caveat: if you are running HDMI or other cables to a nearby piece of furniture, you may need to ensure there is a clear exit path from the wall on the far side.
Pros and cons in plain terms
When it’s a great fit
- You’re wall-mounting a TV and want power and low-voltage cables managed together for a cleaner installation.
- You want a brush-plate pass-through that helps keep cables organized while still being reachable.
- You have a planned in-wall path for both power and low-voltage cabling, and you want one recessed solution to handle the entry point.
When you might look elsewhere
- You don’t want to do any electrical work (this is an outlet-in-wall kit).
- Your cable layout depends on an unusual routing path that does not align well with where cords will exit the wall.
- You need smart-home features, since the kit is not smart-home compatible.
Is it worth it?
If your priority is a tidy, semi-permanent-looking setup for a wall-mounted TV or display, the HT2102WHV1 offers a practical combination of recessed power and a low-voltage pass-through. It’s especially worth considering when you want to reduce visible cabling and keep common connection types (like HDMI and audio) more manageable behind the wall. The main tradeoff is that you are committing to an in-wall electrical project, so buyer fit comes down to whether you are comfortable doing (or supervising) the wiring and whether your cable routing plan accounts for where the cords will go on the far side.
Alternatives to consider (by your main goal)
- If you want power + a simple cord channel but not an outlet: Look for non-electrical TV cord raceways or surface cord covers. These reduce the risk and complexity of electrical work, but they may not hide power as cleanly.
- If you mainly need low-voltage cable routing: Consider low-voltage brush plates or in-wall cable management solutions designed for HDMI and Ethernet only. This can keep your project focused if you already have a separate power source.
- If you want the cleanest “frame-like” look: Compare other recessed TV connection kits that are designed for similar drywall cutouts and recessed depth. The best choice depends on whether the cutout dimensions match your install location and whether the brush plate opening fits your cable bundle.
Price and availability
Check current pricing and availability before ordering. The list price shown is $34.99, and it is currently described as in stock.
FAQ
Common questions
Note: Wiring and electrical work must follow local code and safe practices.
How many low-voltage cables can this kit pass through?
It’s designed to support up to 10 low-voltage cords through the brush plate opening.
Does it include the power outlet in the box?
Yes. The kit includes a recessed 15A, 125V duplex outlet (tamper-resistant) and the corresponding recessed wall plate.
What drywall cutout size does it require?
The kit requires a drywall hole cutout of 7.25 inches by 5.5 inches.
Is it smart-home compatible?
No, it is not smart-home compatible.
Do I need electrical experience to install it?
Because it’s an in-wall outlet kit that must be wired to an existing electrical outlet, buyers without outlet wiring experience may want to use a qualified electrician.
Can it help hide HDMI and audio cables for a wall-mounted TV?
Yes. The brush-plate pass-through is intended for cables like HDMI, Ethernet, and audio so you can route them behind the wall and keep them more accessible.
View latest price on Amazon: Buy on Amazon
Specifications
| Product Title | Legrand – OnQ in-Wall Cable Management Kit for Power & Low Voltage Cords – Hides TV or Display Cables Retrofit Behind the Wall – UL Listed TV Cord Hider w/DIY Install & Included Hardware – HT2102WHV1 |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Raceways |
| Brand | On-Q |
| Manufacturer | Legrand Pass & Seymour |
| Color | White |
| Material | Plastic |
| Item Weight | 13.6 ounces |
| Product Dimensions | 6.25"L x 2.59"W |
| Compatible Devices | All |
| Voltage | 125 Volts |
| Power Plug Type | Type A - 2 pin (North American) |
| Amperage | 15 Amps |
| Connector Type | Power Plug |
| Smart Home Compatibility | Not Smart Home Compatible |
| Connectivity Technology | USB |
| Total Power Outlets | 2 |
| Material Type | Plastic |
| Item Dimensions L x W | 6.25"L x 2.59"W |
| Specification Met | No |
| Brand Name | On-Q |
| Model | HT2102WHV1 |
| UPC | 804428032533 |
| Global Trade Identification Number | 00804428032533 |
| Part Number | HT2102WHV1 |
| Included Components | Recessed wall plate with integrated LV brush opening, junction box, 15A tamper resistant outlet and wall plate |
| Unit Count | 1.0 Count |
| External Testing Certification | cULus |
Available variants
Color
- White
- Black
Style
- In-Wall TV Connection Kit
- In-Wall TV Connection Kit with USB
Recommended next
Delamu Cord Hider, 157in Wire Covers for Cords on Wall
The Delamu Cord Hider (157-inch wall-mounted cable raceway) is designed to conceal 2 to 3 cords in a clean, paintable channel. It installs with an attach-and-snap design and can use adhesive tape or screws, but the adhesive tape is strong enough to risk paint damage if you remove it later.
Cord Cover Wall 32in, TV Cord Hider for Wall Mounted review
The ZhiYo cord cover kit is a snap-on wall wire raceway designed to hide multiple TV cables without drilling. It’s built for a clean, minimal look, uses a PVC channel rated UL94 V-0, and includes two 15.8-inch sections for about 31.5 inches total. Biggest tradeoff: adhesive-only installation can make removal hard and may mark drywall.
630in Cord Hider Kit, Paintable Cable Raceway, Cord Covers for Wires on Wall (YesBes)
A long, connector-rich cord hider kit designed to make wall-mounted TV setups look cleaner fast. It uses self-adhesive installation (no drilling), snaps shut to conceal 2 to 4 cords, and can be cut and painted to match your wall.
A+ ELECTRIC Cord Cover Full Kit, 26ft/315in Self-Adhesive Cable Raceway, 20 Snap-On Channels, Wire Hider for TV, HDMI & Speaker Cables, Includes Connectors & Corners, Paintable Cable Management, White
The A+ ELECTRIC 315-inch self-adhesive cord cover kit is a long-run cable raceway built for tidy TV setups and other home entertainment wiring. Buyers like the snap-on channels, easy routing with multiple connector types, and the option to strengthen adhesion with included screws and anchors, with the main caveat being that very textured walls may need the screw-and-anchor approach.