A+ ELECTRIC Cord Cover Full Kit, 26ft/315in Self-Adhesive Cable Raceway, 20 Snap-On Channels, Wire Hider for TV, HDMI & Speaker Cables, Includes Connectors & Corners, Paintable Cable Management, White
Quick take
This 26-foot (315-inch) snap-on cable raceway kit is designed to hide common TV and home setup wiring, including power, HDMI, Ethernet, and speaker wire. It comes as a full kit with multiple connector and corner pieces, plus pre-applied adhesive and an option to reinforce with screws and anchors. The main thing to watch is that adhesion can be less reliable on heavily textured surfaces, where you may want to switch to the screw-and-anchor install method.
Pros and cons
Pros
- Long coverage for a typical living room TV run (315 inches total).
- Snap-fit cover locks in place with press-to-seal convenience, but opens for cable changes.
- Routing flexibility with straight sections plus inside corners, outside corners, and T connectors.
- Pre-applied adhesive for quick install, with screws and anchors included for extra hold.
- Paintable white finish for a more built-in look.
Cons
- Adhesion may be reduced on heavily textured walls, making the optional screw/anchor method important.
- Best suited for slimmer cable bundles, not bulky, thick, or unusually rigid wiring that does not sit flat.
What buyers think
Buyer feedback is generally focused on ease of installation and how clean the finished look is along walls. Many shoppers highlight that the snap-on channels feel secure when closed, the pieces connect together smoothly, and the kit includes enough corner and connector options to follow common TV and media-device layouts. Several reviewers also mention the adhesive being strong enough for typical use, with the overall impression that the kit feels well made and not flimsy for everyday cable management. There is some emphasis on its “light-duty” nature, meaning it is a practical choice for routine cord hiding rather than for high-abuse situations or very complex, heavy, stiff wiring paths. Buyer-review evidence is also limited on long-term durability beyond typical install satisfaction, so treat “built to last” as a claim of intent rather than a guarantee of impact resistance.
How this cord cover kit is built for real setups
The A+ ELECTRIC kit is meant to be installed as a continuous raceway from your TV area toward outlets and other devices. Instead of relying on a single long strip that may run out mid-route, the kit includes 20 snap-on channels (each 16 inches long), which connect together to match your room layout. Connector variety helps you manage turns and junction points without having to improvise with off-menu parts.
Length and cable capacity
The full kit provides 315 inches (about 26 feet) of coverage and is designed to fit common cable bundles. Each channel comfortably fits 3 to 4 standard cables, with thinner wires like speaker wire able to fit up to about 5 per channel (depending on cable thickness and how neatly you bundle them).
Snap-on cover design (and why that matters)
One of the practical benefits is that the cover uses a snap-fit method: press the lid down to “click” it into place, and it can be removed later when you need to add, remove, or swap a cable. That’s helpful if you frequently change HDMI devices, replace a router location, or move small electronics around.
Adhesion, textured walls, and the install method
This kit uses pre-applied double-sided adhesive (the backing peels off), and it also includes screws and anchors if you want a stronger, more permanent hold. That flexibility matters because wall texture can affect tape bonding. On smoother surfaces, the peel-and-press method is typically straightforward. On heavily textured surfaces, plan on using the included hardware method so the channels do not slowly lift at the edges.
Paintable finish for a cleaner blend
The white raceway is made to accept standard wall paint, which can help it look less like an “add-on” and more like part of your wall. If you care about visual integration, painting before the final snap-on cover is a common approach, but the key point is that the surface is intended to be paint-friendly.
Pros and cons for different buyers
Best for
- Homeowners or renters who want a tidy TV and media setup with a long run of hidden cables.
- People who want a kit that includes corners, T connectors, and straight connectors so the layout can follow the room.
- Buyers who prefer quick install with adhesive but want the option to reinforce with screws and anchors.
- Anyone who wants to manage multiple cable types, such as HDMI, Ethernet, speaker wire, and power cords (within the channel fit limits).
Who should avoid it
- If you plan to route very bulky, thick, or stiff wiring that cannot sit neatly inside a 1-inch-wide raceway, you may have trouble closing the cover smoothly.
- If your walls are heavily textured and you do not want to use the included screws and anchors, adhesive-only installation may not be the most reliable approach.
Is it worth the money?
At its best price-to-feature point, this kit offers a lot of what buyers need for a full-room cable path: long coverage, snap-fit channels, and multiple corner and connector pieces in one box. It also gives you two mounting options, which helps reduce the risk of a raceway that only works on perfectly smooth walls. If your cable hiding job is limited to a short run and you do not need corners or junctions, a smaller kit could be simpler. But for many TV wall setups, this “full kit” format is a strong fit because it reduces the odds of running short mid-project.
Alternatives to consider (by fit, not by brand)
- Short-run cable covers: If you only need a few feet from a TV to a nearby outlet, a smaller kit can reduce waste and keep everything straightforward.
- Surface-mount cable raceways for very rough walls: If your wall texture is extreme and you prefer hardware-only installs, consider a mounting style designed for rough surfaces (rather than relying primarily on tape).
- More spacious raceways: If you regularly manage thicker bundled cables or need to route less flexible cable bundles, look for a raceway with a wider channel to make cover closure easier.
FAQs
How many cables can this raceway kit hold?
Each 16-inch channel is designed to fit about 3 to 4 standard cables. Thinner wires like speaker wire can fit up to about 5 per channel, depending on cable thickness and how tightly you bundle them.
Does it come with adhesive?
Yes. The channels include pre-applied double-sided adhesive tape for peel-and-press installation. For stronger hold, screws and anchors are also included.
Can I install it on textured walls?
Textured surfaces can reduce adhesive performance because there is less consistent contact area. If your wall is heavily textured, it’s a good idea to plan on using the included screws and anchors for a more secure mount.
Is the white raceway paintable?
Yes. The finish is designed to be paint-friendly, so you can match it to your wall color for a cleaner, more integrated look.
How long is the kit?
The total coverage is 315 inches, which is about 26 feet.
Will it work for TV cables like HDMI and Ethernet?
Yes. The kit is intended for common home media cabling, including HDMI, Ethernet, speaker wire, and power cords, as long as your cable bundle fits within the channel capacity and you can comfortably close the cover.
Specifications
| Product Title | A+ ELECTRIC Cord Cover Full Kit, 26ft/315in Self-Adhesive Cable Raceway, 20 Snap-On Channels, Wire Hider for TV, HDMI & Speaker Cables, Includes Connectors & Corners, Paintable Cable Management, White |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Raceways |
| Brand | A+ ELECTRIC |
| Manufacturer | A Plus Plastik |
| Model Number | FULL-KIT-CORD-HIDER |
| Color | White |
| Material | Polyvinyl Chloride |
| Product Dimensions | 315"L x 1"W |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Number of Pieces | 20 |
| Unit Count | 26.0 Feet |
| Global Trade Identification Number | 08681925735844 |
| Mfr Part Number | yun--199 |
| Warranty Description | 2 Year Manufacturer Warranty |
| Enclosure Material | Polyvinyl Chloride |
| Item Dimensions L x W | 315"L x 1"W |
| Installation Type | Peel & Stick Tape (Pre-Applied) + Optional Screws Included |
| Style Name | 315" Full Kit for 3-4 Cables |
| Style | 315" Full Kit for 3-4 Cables |
Available variants
Size
- Custom Kit (4ft Each, 28–100ft)
- 315" Full Kit for 3-4 Cables
Recommended next
EVEO Cable Hider Wall - 153" Wall Cord Hider (White)
The EVEO Cable Hider Wall is a self-adhesive cable raceway designed to conceal messy cords along baseboards, desks, or behind a wall-mounted TV. It’s cuttable, paintable, and uses a snap-on cover, making it a practical way to improve both the look and day-to-day safety of exposed cables, with the main tradeoff being how strongly the adhesive bonds to the wall.
Delamu Cord Hider, 157in Wire Covers for Cords on Wall
The Delamu Cord Hider (157-inch wall-mounted cable raceway) is designed to conceal 2 to 3 cords in a clean, paintable channel. It installs with an attach-and-snap design and can use adhesive tape or screws, but the adhesive tape is strong enough to risk paint damage if you remove it later.
EVEO Cable Hider Wall 306”
The EVEO Cable Hider Wall 306” is a slim, paintable wall cord cover designed to conceal and organize TV and entertainment wiring. It’s easy to install with self-adhesive options or screws, but you’ll want to plan placement carefully because strong adhesive can make relocation tricky.
ECHOGEAR TV Cord Hider for Wall Mounted TV (White)
The ECHOGEAR TV cord hider is a DIY cable pass-through kit that lets you route low-voltage A/V cables behind drywall for a cleaner wall-mounted setup. It includes two pass-through grommets, locking brackets, and a hole-saw drill attachment for cutting tidy grommet holes, with a paintable finish to help the openings blend in.