YCLYC TV Cord Hider (39 in cord covers for wall-mounted TVs)
Quick take
The YCLYC TV Cord Hider is a PVC cable raceway kit that helps hide multiple cords behind a wall-mounted TV or along a desktop. It’s designed to cover up to several cables and is installed quickly with strong double-sided adhesive, but it needs a suitable wall surface because tape may not bond well to textured or dusty finishes.
Pros and cons
Pros
- Designed for multi-cable setups: capacity for 4 HDMI or up to 6 Cat 6 Ethernet cables.
- Simple, fast install: tool-free placement with included double-sided adhesive strips.
- Flexible length approach: three 13-inch sections, total 39 inches, can be trimmed to fit.
- Blend-in look: smooth surface that can be painted.
- Safety-focused materials: PVC with UL94 V-0 flame retardancy rating.
Cons
- Adhesive depends on surface: tape may not stick properly on textured or rough, dusty walls.
- Removing tape can damage surfaces: repositioning is not ideal once applied.
- Connections between sections may require planning: the provided segments are meant to be installed in a layout rather than endlessly reconfigured.
What buyers think
Buyer-review evidence for this cord hider highlights two consistent themes: installation is generally straightforward, and the finished look is usually more discreet and tidy than leaving cables exposed. Several reviews also emphasize that the adhesive is very strong, which helps it stay in place once positioned, but it also makes careful placement important. Where issues come up, they tend to relate to practical fit or appearance choices, such as matching the cord cover color to a wall, rather than major performance failures.
What this cord hider is for
This kit is meant to cover visible TV cabling running along a wall. It works well when you have multiple cords to conceal, like HDMI and Ethernet, and you want a cleaner line without managing loose cable loops in sight. The three-section layout gives you the option to run a 39-inch path, or trim down to match your specific wall route.
Key specs that matter in real setups
Capacity and cable fit
The unit is built for multi-cable hiding, with guidance for up to 4 HDMI or 6 Cat 6 Ethernet cables. The overall cover dimensions are 1.5 inches wide by 0.75 inches high, which helps determine whether your specific plugs and cable thickness will slide comfortably into the channel.
Length and sectioning
It includes three cable raceway pieces, each 13 inches long, for a total of 39 inches. Both ends can connect in a way that aims to look continuous, so you can create a longer covered run. If your run is shorter, you can cut the raceway to the length you need (a hacksaw is mentioned for trimming).
Installation method
Installation is designed to be quick and tool-free using strong double-sided adhesive strips. Screws are not required for mounting, but the product notes that tape should not be used on textured walls, and that rough or dusty surfaces may reduce adhesion. It also notes that removal may damage the surface, and that repositioning should be done carefully. For situations where you do want a more permanent mount, the option of nails or screws is mentioned.
Material, finish, and safety
The cover housing is made from PVC. It includes a paintable look, with guidance that you can paint the channel to better blend into your wall. It also carries an UL94 V-0 flame retardancy rating, which is relevant for buyers looking for added material safety characteristics around cable routing.
Pros and cons for choosing this kind of cord raceway
When the YCLYC cord hider is a good fit
- You’re mounting a TV and want to conceal a small bundle of common cables (HDMI and/or Ethernet) in one visible path.
- You prefer adhesive mounting over drilling, and your wall surface is smooth enough for tape to bond reliably.
- You want a cover that can blend in visually, either as-is (white) or with paint.
- You’re planning a run around about 39 inches, or you can trim the included segments to your layout.
Who should consider alternatives
- If your wall is textured, dusty, or otherwise not ideal for adhesive, you may have adhesion problems. In that case, a mounting approach that relies less on tape can be easier.
- If you expect to frequently reposition the cover, adhesive-only kits can be risky because removal may damage surfaces.
- If your cable ends are unusually bulky, double-check that your connectors and cable thickness will comfortably fit within the 1.5 x 0.75 inch channel.
Is it worth it?
For buyers who want a clean, low-profile way to hide multiple TV cables quickly, this cord hider kit is a practical option because it combines multi-cable capacity, a paintable finish, and adhesive-based installation. The main decision point is your wall surface, since the strong double-sided tape is both a benefit (stays put) and a limitation (doesn’t perform well on textured or dusty surfaces, and removal can harm the wall).
FAQ
How many cables can this TV cord hider hold?
It’s designed for multi-cable hiding, with guidance for up to 4 HDMI cables or up to 6 Cat 6 Ethernet cables, depending on cable thickness and connectors.
Is this TV cord hider easy to install?
Yes, it uses double-sided adhesive strips for tool-free installation. The kit is designed to go up in minutes, but placement should be careful because the tape is very strong.
Can I use the adhesive on textured walls?
No. The product notes that tape should not be used on textured walls. Smooth, clean surfaces work best for adhesive bonding.
What if I need to cut it to fit?
The kit includes three 13-inch sections for a 39-inch total run. You can trim the raceway to your preferred length using a hacksaw.
Is the cord hider paintable?
Yes. It has a finish intended to blend in, and you can paint the cord channel to match your wall.
Does it have a flame-retardant rating?
Yes. The cable cover is UL94 V-0 rated for flame retardancy.
Specifications
| Product Title | TV Cord Hider - 39in(3xL13in) Cord Covers for Wall Mounted TV Cable Hider Wall Kit | Wire Hiders for TV on Wall, Wire Covers for Cords, Cable Concealer Hide Cords, 1.5" W x 0.75" H, White |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Raceways |
| Brand | YCLYC |
| Manufacturer | YCLYC |
| Color | White |
| Material | Polyvinyl Chloride |
| Product Dimensions | 13"L x 1.5"W |
| Indoor Outdoor Usage | Indoor |
| Number of Pieces | 3 |
| Unit Count | 1 Count |
| Warranty Description | 1 Year |
| Enclosure Material | Polyvinyl Chloride |
| Item Dimensions L x W | 13"L x 1.5"W |
| Installation Type | Self-Adhesive |
| Style Name | Modern |
| Style | Modern |
Available variants
Color
- Black
- Beige
- White
- Grey
Size
- Small-116in
- X-Large-47in
- Medium-39in
- Small-66in
- Large-39in
Recommended next
Under Desk Cable Management Tray No Drill, Metal Mesh Cable review
This no-drill under-desk cable management tray from Litwaro uses a clamp mount and a 2-hole mesh design to keep power strips, adapters, and cable runs off the floor. It’s best for flat-edge desks in the 0.4 to 2 inch thickness range, and the main tradeoff is fit: awkward or non-flat desk edges may limit how securely it clamps.
ZhiYo 2x2in Cable Raceway, 6ft Server Rack Cable Management Under Desk Cord Organizer, Electrical Safe PVC Cable Hider Open Slot Wire Raceway for Network/PC/TVs, Wire Duct Black
The ZhiYo 2x2in open-slot PVC cable raceway is a simple, screw-in way to hide and protect network, PC, and entertainment cables. It uses a U-duct style with openings on both sides for easier routing, and its size targets medium cable runs (up to about 40 cables depending on thickness). The main tradeoff is installation, the included hardware may not suit all surfaces, and some thicker braided cables may feel tight in the slot.
Delamu Cord Hider, 157in Wire Covers for Cords on Wall
The Delamu Cord Hider (157-inch wall-mounted cable raceway) is designed to conceal 2 to 3 cords in a clean, paintable channel. It installs with an attach-and-snap design and can use adhesive tape or screws, but the adhesive tape is strong enough to risk paint damage if you remove it later.
One Cord Cover Wall 153in(9X L17in), Mini Wire Hider, Self-Adhesive Wire Cover for Hiding Speaker Wire, Baby Monitor Cord
A slim, paintable wall cable raceway kit designed to hide a single mini cord at a time. It’s easy to cut and peel-and-stick onto clean, smooth surfaces, with a sliding cover that keeps wires contained for a cleaner, safer look. The main tradeoff is fit, it only works for very thin cables, and tape mounting can be fussy on some surfaces.