ZhiYo Wire Covers for 2 Cords, Wire Hider on Wall Mounted (White Cord Cover Kit)
Quick take
ZhiYo wire covers are a peel-and-stick PVC cable raceway kit for tidy wall-mounted cable runs. This narrow size is made for slim cables (about 0.3 in diameter or less), with capacity intended for 1 power cable plus 1 Ethernet cable, or 2 Ethernet cables. The main tradeoff is the adhesive, which is strong enough that you should plan the route carefully before sticking it down.
Pros and cons
Pros
- Quick, tool-free installation with pre-applied double-sided adhesive tape.
- PVC channel design helps keep cables organized and less visible on walls.
- Built for slim cables, supporting common setups like Ethernet and power together.
- Sturdy, clean-looking finish when aligned properly.
Cons
- Not suitable for thick power cords, confirm cable diameter before buying.
- Adhesive tape is very strong, and removing it may risk wall paint.
- Tape is not ideal for textured walls or rough surfaces.
- Color matching may be noticeable if your wall shade is uncommon.
What buyers think
Buyer-review evidence is strongly positive on the everyday results: the channels are quick to apply, they tend to stay put when pressed down, and they create a noticeably cleaner, more organized wall look for setups like mounted TVs and wall lighting. Many also highlight that the kit is easy to cut to fit the length of a run and that the cables are largely concealed from view when installed straight. The most consistent caution is adhesive strength, with reviewers advising extra care in placement because removal can potentially pull paint. Overall, the pattern suggests the product works best for buyers who already know their cable size and can commit to a planned route.
What this cable raceway kit is for
This is a wall-mounted cord cover system designed to route and conceal visible cables along a straight or planned wall path. It is sized for “1 to 2 cord” arrangements, such as:
- One power cable plus one Ethernet cable
- Two Ethernet cables
It uses a PVC channel with an adhesive-backed base, then you place your cables into the raceway to keep them neat and less exposed.
Size and capacity, the part you should verify first
The width and height of this kit are small, which is great for discreet cable hiding, but it also limits compatibility. The guidance for this size is to keep your cable diameter under about 0.3 inches before purchasing. If your power cable is thicker than typical low-profile adapters, it may not fit comfortably in the channel.
Because cable raceways live and die by fit, measure your cable bundle before committing. If you are running a thicker power brick, consider a larger channel size in the category that matches your cable’s diameter.
Installation experience: peel, stick, align
Installation is intended to be simple and tool-free. The kit comes with pre-applied adhesive tape on the base, so you peel and stick the channel to the wall, then position the cords inside.
Two practical tips show up in buyer feedback:
- Plan your route first. The adhesive is described as very strong, so you want the channel straight and exactly where you want it before fully pressing it down.
- Expect trouble on textured surfaces. The tape is not recommended for textured walls or surfaces, which can reduce hold or lead to uneven contact.
If you want a crisp, “nearly invisible” look, take time to align the channel straight along the wall run.
Build and materials
The raceway channel is made from PVC material. The kit is also positioned as a safer, fire-resistant option within the cord management category, while remaining focused on clean, everyday organization rather than a heavy-duty protective conduit.
Buyers generally describe the channel as sturdy and able to hold cables in place without looking flimsy once installed properly.
Cleaning and repainting considerations
Because the base uses strong adhesive tape, removal can be risky for walls. Buyer feedback specifically warns that pulling it off may rip or damage paint, so treat installation as mostly one-way. If you are planning to repaint soon, consider waiting until after the wall is final, or choose a method that better tolerates future removal.
Also note that color matching can matter. If your wall color is unusual, the white channel may be more noticeable than you expect.
Who should buy it
- You have slim cables and want them hidden along a wall-mounted TV or light setup.
- You want an easy, no-screws installation option.
- Your run length is manageable, and you can align the channel straight before pressing it down.
- You are organizing cables like Ethernet and a thin power lead together.
Who should avoid it
- Your power adapters are thick or bulky, likely exceeding the channel’s diameter guidance.
- Your wall is textured or uneven, where adhesive contact may be unreliable.
- You expect to move the cables later and would need to remove or reposition the tape frequently.
- You need a near-match for a rare wall color and cannot tolerate visible contrast.
Alternatives to consider (by buyer need)
If the main criteria above do not match your situation, you may want a different cord management approach:
- If you need thicker-cable support: look for larger cross-section cable raceways designed for bulkier power bricks.
- If you cannot use adhesive on your wall: consider screw-mount cable raceways or hybrid options that include mechanical fastening (especially for textured surfaces).
- If you need more color flexibility: consider raceways offered in multiple wall-friendly shades, or options that are paintable and designed for closer blending.
Verdict
The ZhiYo wire covers are a practical choice for hiding slim cables on smooth walls, especially when you want a quick, adhesive-only install and a clean, organized look. The best results depend on two factors: cable diameter fit (under the stated limit) and careful placement (because the tape is very strong and removal can risk paint). If your setup matches those requirements, it is an easy way to make wall-mounted cords look far more intentional.
FAQs
How many cords can this ZhiYo wire cover hold?
This kit is intended for 1 to 2 slim cords, including configurations like one power cable plus one Ethernet cable, or two Ethernet cables. It is not suitable for thick power cords.
What cable diameter does it fit?
For this size, the guidance is to ensure your cable diameter is under about 0.3 inches before purchasing.
Is it easy to install?
Yes. It uses pre-applied adhesive tape, so installation is peel-and-stick, then place the cables into the channel.
Will the adhesive work on textured walls?
The adhesive tape is not suitable for textured walls or rough surfaces, since proper tape contact is important for staying power.
Can I remove it later?
Removal can be difficult and may damage paint, so plan the route carefully and commit to the placement before pressing it down fully.
Is the cord cover paintable?
Paintability is listed for the product line, and it is commonly used to blend with walls, but exact results depend on your paint and wall finish. If you need a perfect match, test a small area first.
Specifications
| Product Title | ZhiYo Wire Covers for 2 Cords, Wire Hider on Wall Mounted, White Cord Cover Kit, Cable Cover Cable Concealer for Extension Cord, Ethernet Cable, Speaker Wire, 0.7in(W) x 0.4in(H) |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Raceways |
| Brand | ZhiYo |
| Manufacturer | ZhiYo |
| Color | White |
| Material | Polyvinyl Chloride |
| Product Dimensions | 17"L x 0.7"W |
| Indoor Outdoor Usage | Indoor |
| Number of Pieces | 4 |
| Unit Count | 1.0 Count |
| Warranty Description | / |
| Enclosure Material | Polyvinyl Chloride |
| Item Dimensions L x W | 17"L x 0.7"W |
| Installation Type | Self-Adhesive |
| Style Name | Modern |
| Style | Modern |
Available variants
Size
- W0.95in X H0.47in X L68in
- W0.7in X H0.4in X L43.7in
- W0.46in X H0.3in X L85in
- W0.6in X H0.4in X L68in
- W1.2in X H0.65in X L66in
- W1.54in X H0.75in X L72in
- W0.7in X H0.4in X L68in
- W1.54in X H0.75in X L32in
- W0.95in X H0.47in X L43.7in
Color
- Brown
- Black
- Beige
- White
- Grey
Recommended next
YesBes 116in Cord Hider Kit, Cord Covers for Wires on Wall
The YesBes 116in cord hider kit is a self-adhesive, paintable cable raceway system designed to clean up wall-mounted TV and low-to-the-wall wiring. With 116 inches of channel coverage (0.96 in wide by 0.57 in tall internal dimensions) and included connectors, it’s geared for tidy cable runs, but it does require a smooth mounting surface for best adhesion.
YECAYE 6 Pack Cable Management, Cord Organizer, Cable Organizer, Adhesive Mount Cord Organizer for Desk, No-Drill Desk Wire Management for Home Office, Baby proofing, Black
The YECAYE 6 pack desk cable management kit uses self-adhesive, J-channel raceways to hide and organize power and low-voltage cables under a desk or along a wall. It is designed for easy cable add or removal with an outward-facing opening, but it works best on smooth, even surfaces where the adhesive can bond reliably.
No-Screw Under Desk Cable Management Tray - Self-Adhesive Installation, Cord Management, Cable Tray, Under Desk Wire Organizer - White Set of 2
A self-adhesive under-desk cable tray set designed to reduce visible cord clutter and keep power bricks and adapters organized. Buyers like the screwless installation and sturdy, solid feel, with the main tradeoff being that repositioning after the adhesive sets requires care and desk-surface prep matters.
A+ ELECTRIC Cord Cover Full Kit, 26ft/315in Self-Adhesive Cable Raceway, 20 Snap-On Channels, Wire Hider for TV, HDMI & Speaker Cables, Includes Connectors & Corners, Paintable Cable Management, White
The A+ ELECTRIC 315-inch self-adhesive cord cover kit is a long-run cable raceway built for tidy TV setups and other home entertainment wiring. Buyers like the snap-on channels, easy routing with multiple connector types, and the option to strengthen adhesion with included screws and anchors, with the main caveat being that very textured walls may need the screw-and-anchor approach.