EVZA cord hider kit (315 in, paintable white cable raceway)
Quick take
EVZA’s cord hider kit is a paintable PVC cable raceway system designed to hide TV, speaker, and desk cables along baseboards or walls. It includes multiple channel sections plus corner and transition connectors, and it’s sized to hold several cables per run. The main catch is that peel-and-stick adhesion is best on smooth surfaces, and the rails and connectors may not match perfectly in finish or shade.
Pros and cons
Pros
- Paintable, cuttable PVC raceway channels for easier wall matching and custom lengths
- Includes routing pieces like couplings and elbows to help create cleaner turns
- Designed for multi-cable runs (up to 1 inch wide and about 0.63 inch high channels)
- Modular design lets you remove individual covers without taking everything apart
Cons
- Adhesive may not hold as well on rough or porous surfaces, so fasteners may be needed
- Some buyers notice a finish or color shade difference between rails and connectors on plain walls
What buyers think
Buyer-review evidence is generally consistent on a few points: the kit is straightforward to route and assemble, the channels feel sturdy, and installation is clean when mounted to smooth surfaces. Users also mention that there is enough channel length and internal space for multiple cables. Where feedback varies, it mainly comes down to mounting conditions (peel-and-stick lasting for hours on smoother surfaces, while rougher areas may require anchors) and appearance details, with a noticeable mismatch between rail and connector finish/shade in at least some installs.
Who this cord hider kit is for
This type of cable raceway kit is a good fit if you want a neater look for visible wiring without building a custom solution. The EVZA kit works well for wall-mounted TV setups and similar runs where you need to conceal a few cables along a straight path and through corners.
- Best for: hiding 3 to 4 cables per run (for example, common combinations of video and accessory cables)
- Good for: office desk cable management and speaker or low-voltage cable runs where you want a consistent channel line
- Great when color matching matters: the system is paintable, so you can tailor it to the wall or trim
Key features and how they affect your setup
Capacity and channel size
The channels measure about 15.7 inches long per piece, and the system totals 315 inches. The interior space is intended for cables up to roughly 1 inch wide and about 0.63 inch high, with a practical expectation of hiding around 3 to 4 cables depending on thickness and how neatly you bundle them.
Paintable and cuttable for custom runs
Because the raceway is cuttable and paintable, you can trim sections to fit your wall length requirements. This matters if you are working around outlets, mounting hardware, or door frames where a one-size run rarely lines up exactly.
Installation flexibility, tape first (and screws when needed)
The kit uses self-adhesive mounting tape as the primary method, with the option to use anchors and screws. In practice, mounting conditions drive the decision. Smooth surfaces tend to work best for long-term tape adhesion, while rougher surfaces may require mechanical fastening to keep the channel aligned over time.
Connectors for cleaner routing
To make turns and transitions easier, the kit includes multiple connectors such as couplings, flat pieces, and inside and outside elbows. Some buyers also highlight that each cover can be removed individually, which can help if you need to add or swap cables later.
Pros and cons (real-world tradeoffs to consider)
Pros
- Cleaner look than loose cable ties: channels create a consistent, organized run for visible cords
- More manageable routing: included elbows and couplings help you follow common layout paths
- Customizable finish: paint-friendly material lets you blend the raceway into your wall
- Future-proofing for minor changes: modular cover access can make updates easier than fully replacing a setup
Cons
- Adhesive depends on the surface: if your wall is rough or textured, plan on using anchors and screws for stability
- Appearance mismatch can stand out: rails and connectors may differ slightly in finish or shade, which can be more noticeable on plain walls
Price and availability
The kit is listed in the U.S. market with a current price around $24.99 (with a higher list price shown). If you are comparison shopping, check whether the channel length and connector count matches your layout needs, since that impacts overall value.
Is this EVZA cord hider kit worth it?
Choose this cord hider kit if you want a paintable, cuttable PVC raceway system with enough total length for a typical TV or multi-cable run, and you can mount it to a wall surface that supports strong tape adhesion (or you are willing to fasten with anchors and screws). It is less ideal if you require a perfectly uniform appearance between rails and connectors, or if your install will rely entirely on adhesive on rough surfaces.
Alternatives to consider (by buying criteria)
- If your wall is very rough: look for cord raceway options that emphasize screw mounting or include robust mechanical mounting hardware.
- If you need heavy cable bundling: compare channel dimensions and stated cable capacity, and prioritize kits where the internal height and width match your specific cable thickness.
- If you want the most seamless look: prioritize raceways marketed as having matched rail-and-connector finishes, and consider painting the entire run after assembly.
FAQs
How many cables can the EVZA cord hider kit hold?
The design is intended for about 3 to 4 cables per run, depending on how wide and how thick your cables are and how neatly you bundle them.
Can I cut the cable raceway to fit?
Yes. The PVC channels are described as cuttable, so you can trim them to match your wall length and layout.
Is it paintable to match the wall?
Yes. The raceway is paintable, which can help the channel blend into your wall or trim.
Will the adhesive work on textured or rough walls?
Adhesive performance can vary. Smooth surfaces tend to work better with tape, while rougher areas may need the included anchors and screws for a more secure hold.
Does the kit include connectors for corners?
Yes. It includes connectors such as couplings and inside and outside elbows to help you route cables around turns and transitions.
Can I remove a section later without taking the whole system down?
Some buyers note that you can remove each cover individually without removing everything, which can make later cable changes easier.
Specifications
| Product Title | Cord Hider, Wire Cover, Cord Covers Wall Mounted TV, Cable Hider, 315 in Paintable White Raceway Kit, Electrical Cords Concealer, Cable Management, Hide Cords Wall, Wire Molding, Adhesive Channel |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Raceways |
| Brand | EVZA |
| Manufacturer | EVZA |
| Model Number | CRW25X16 - White Cable Raceway |
| Color | White |
| Material | Polyvinyl Chloride |
| Product Dimensions | 15.7"L x 1"W |
| Indoor Outdoor Usage | Indoor |
| UPC | 860009536036 |
| Unit Count | 1.0 Count |
| Mfr Part Number | CRW25X16 - White Cable Raceway |
| Warranty Description | 1 year manufacturer |
| Item Type Name | cable-raceways |
| Enclosure Material | Polyvinyl Chloride |
| Item Dimensions L x W | 15.7"L x 1"W |
| Installation Type | Self-Adhesive |
| Style Name | Cord Hider |
| Style | Cord Hider |
Available variants
Size
- 157 in for 3-4 Cables
- 315 in for 3-4 Cables
- 157 in for 1-2 Cables
- 315 in for 1-2 Cables
Color
- Black
- Brown
- White
- Grey
Recommended next
Delamu TV Cord Hider, Cord Covers for 2-3 Wires on Wall, Paintable Cable Hider Wire Covers for Cords, Easier Setup Wire Hiders for TV on Wall, Cable Cover Management to Hide Wires, W0.94H0.47in, White
The Delamu TV Cord Hider is a low-profile plastic cable raceway kit designed to hide 2 to 3 cables along a wall for a cleaner TV setup. It uses an attach-and-snap style closure and is paintable, so you can match it to your wall color. It is a solid pick for simple cable runs, but the rigidity and “straight-line” layout may require right angles or extra sections.
Delamu 2 Pack Safe & Tidy Cable Management Solution
The Delamu 2 Pack Safe & Tidy Cable Management Solution is a simple, no-drill under-desk cable raceway kit designed to guide and protect cords for home and office setups. It uses a self-adhesive mount with an outward-facing opening to make running and removing cables easier, with PVC construction and a flame-retardant feature. Best for buyers who want a clean look and basic cable containment, not permanent, heavy-duty cord routing.
Delamu Cord Hider, 157in Wire Covers for Cords on Wall
The Delamu Cord Hider (157-inch wall-mounted cable raceway) is designed to conceal 2 to 3 cords in a clean, paintable channel. It installs with an attach-and-snap design and can use adhesive tape or screws, but the adhesive tape is strong enough to risk paint damage if you remove it later.
D-Line Cable Management Box, Power Strip Holder, Floor Outlet Hiders, Desk Cord Organizer, Cover TV Wires, Wire Storage, Extension Hider, Office Concealer for Cords, Baby Proof Cables - Large, Black
The D-Line large cable management box is a freestanding ABS plastic enclosure designed to hide a power strip plus extra cord runs for cleaner TV stands, desks, and other media or office setups. Buyers like the tidy look and cord security, with the main caveat being that it only fits power strips sized appropriately to the box dimensions.