(Pack of 3 3 AA Battery Holder with Leads, 3 AA Battery Holder with Wires)
Quick take
This is a set of three 3-AA battery holders with red and black leads, designed for projects that need a 4.5V battery pack (3x 1.5V AA). It is a practical choice for replacements and DIY electronics where you are comfortable soldering, but it has no on/off switch.
Pros and cons
Pros
- Includes three separate 3-AA holders with pre-attached leads for wiring into a circuit
- Rated for 3x AA operation (4.5V when using 1.5V AA cells)
- Red and black lead polarity makes connection straightforward for typical DC circuits
- Lightweight plastic (ABS) holders are easy to incorporate into compact builds
Cons
- No built-in cover or on/off switch, so you may need to add a control if you want easy power management
- Wiring involves soldering, which adds a step for non-hobbyist buyers
What buyers think
Buyer-review evidence is limited but consistent around a few themes. Many people purchase these holders as replacements for older holders that failed due to battery corrosion or damage, and they report the holders work as intended once installed. Several buyers also mention the leads are workable for soldering, and that the overall build is “cheap but fine” for practical replacement use.
What this battery holder is for
This pack is aimed at anyone powering a small device from 3 AA cells and who needs the battery terminals brought out to wire leads. With three holders included, it also makes sense when you need spares for multiple projects, or when one replacement is not enough.
Key specifications to know before buying
Battery configuration and output
- Type: 3x AA battery holder (3 AA cells in series)
- Voltage: 4.5V output when using standard 1.5V AA batteries
Leads and polarity
- Leads included: yes, each holder comes with red and black wires
- Lead ends: tinned wire ends for easier soldering
- Wire length: 5.9 in (15 cm)
- Polarity: red lead corresponds to the positive side, black to the negative side
Physical fit
- Housing material: ABS plastic
- Size of one holder: about 2.287 x 1.906 x 0.567 in (5.81 x 4.84 x 1.44 cm)
- Weight of one holder: about 11 g
Pros and cons for real-world use
Pros
- Replacement-friendly: Buyers use these to restore devices after battery-holder failure, especially when older holders were damaged or corroded.
- Wiring-ready: The pre-attached, tinned leads reduce how much terminal work you need to do before soldering into a circuit.
- Convenient polarity coloring: Red/black lead labeling aligns with common DC wiring practices.
Cons
- No switch or cover: If you need a power toggle or want the battery compartment protected, you will likely need to add a separate switch and mounting solution.
- Soldering required: It is a good fit for DIY and repair work, but it may be less suitable if you want a tool-free battery connection.
Who should buy (and who should skip)
Best for
- DIY electronics and small projects that require a 3-AA (4.5V) battery pack with wire leads
- Repair and replacement jobs where the original battery holder failed
- Buyers who are comfortable soldering the battery leads to a PCB or wiring harness
- People who want multiple holders in one pack for a couple of projects or quick swaps
Better alternatives if you need
- An on/off switch: Consider a holder that includes a switch if you do not want to add one externally.
- No soldering: Look for battery holders that use snap terminals or screw terminals instead of leads requiring solder.
- Extra battery protection: Choose a holder that includes a cover and more robust strain relief for leads.
Verdict
The pack of three 3-AA battery holders with leads is a straightforward, budget-oriented solution for replacement and DIY wiring. If your project can accommodate soldering and you do not require an integrated on/off switch, this is a practical way to get working battery power with clear red and black lead polarity.
FAQ
How much voltage do I get from a 3x AA battery holder?
Using three 1.5V AA batteries, the holder is for a 4.5V setup (3x 1.5V in series).
Does this battery holder include an on/off switch?
No, it does not include an on/off switch, so you would need to add one if your device requires switching.
Do the holders come with wires attached?
Yes. Each of the three holders includes red and black leads (with tinned wire ends) for soldering or wiring into a circuit.
What is the wire length on the leads?
The leads are about 5.9 inches (15 cm) long.
Are these good for replacement battery holders?
They are commonly used for replacement purposes, especially when a previous holder was damaged or affected by corrosion, as long as you are comfortable doing the wiring step.
Specifications
| Product Title | (Pack of 3 3 AA Battery Holder with Leads, 3 AA Battery Holder with Wires |
|---|---|
| Category | Electronics > Household Batteries, Chargers & Accessories > Battery Holders |
| Brand | LampVPath |
| Manufacturer | LampVPath |
| Model Name | AAA |
| Model Number | 3AA-3PC |
| Item Weight | 11 Grams |
| UPC | 739340317768 |
| Battery Capacity | 1.5 Volts |
| Voltage | 4.5 Volts |
| Reusability | Single Use |
| Unit Count | 3 Count |
| Battery Weight | 11 Grams |
Recommended next
Comecase Battery Organizer Storage Case, Battery Vault Carrying Container Bag review
The Comecase battery organizer storage case is a high-capacity, EVA foam-lined holder designed to keep AA, AAA, C, D, 9V, and button-cell batteries separated and easier to find. A removable BT-168 digital tester is included to quickly check 1.5V and 9V battery power, but it is not meant to replace a charger, and the organizer can be a bit labor-intensive to set up when you first remove the foam pieces.
(Pack of 2 9v Battery Holder, 9 Volt Battery Holder with Switch, 9v Battery Case with Switch)
These LampVPath 9V battery holders come as a 2-pack, each with an integrated on/off switch and red/black wire leads. They are a practical pick for hobby and DIY builds that need a simple, compact way to power a 9V device, with the main caveat being that the internal battery contact can be sensitive to how the battery seats.
ENGPOW Battery Organizer, Fireproof Battery Organizer Storage Case with Tester (BT168)
The ENGPOW BT168 is a soft, zipper-closed battery storage case designed to hold 220+ mixed battery types while keeping them separated in foam cutouts. It adds a battery tester for quick “what to recycle” checks and aims to reduce risk with fire-retardant, water-resistant materials. It is best for households that want a single place for AA/AAA/C/D/9V and common button batteries, but it has a fixed slot layout, so niche battery shapes may not fit perfectly.
9V Battery Connector,10 PCS T-Type 9 Volt Buckle Connector Hard Plastic Shell Used in Student Experiment,or Other Equipment with Battery
This 10-pack of 9V T-type battery connectors is built for quick DIY wiring and replacing worn-out 9V battery leads. With a hard plastic shell for protection and tin-dipped wire ends for easier connection, it is a practical choice for school experiments and small electronics fixes, as long as you are using 9V batteries only.