(Pack of 2 2 AA Battery Holder with Switch, 2X 1.5V AA Battery Holder Case with Wire Leads and ON/Off Switch)
Quick take
This is a 2-pack of compact holders for two AA batteries, each with an ON/OFF switch and red/black wire leads for powering devices or wiring into a project. It is a practical choice for simple repairs or DIY builds where you want a battery “box” plus a convenient switch, but mounting may be less straightforward because the included screws may not fit well for everyone.
Pros and cons
Pros
- ON/OFF switch integrated into each 2-AA holder for easier control
- Includes wire leads (red and black) with tinned ends for quicker connections
- Good value for the number of holders included (2 pieces)
- Buyers report the holders work well for repairs and device replacements
Cons
- Included screws may be too small or not ideal for mounting the holder in some applications
- For longer runtimes, AA-only power may still limit sessions depending on your device’s draw
What buyers think
Buyer-review evidence is consistently positive on usability and basic performance, especially for replacing or restoring battery compartments and wiring projects. Several shoppers mention that the switch operates as expected and that the holders fit the intended repair use cases. The main recurring friction point is mounting hardware, where some buyers found the screws provided were not a great match for the holder.
What this battery holder is for
These battery cases are built for anyone who needs a simple way to power a device from two AA cells while also keeping an on-device power switch. The wired leads make it easier to connect the battery output to an existing circuit, rather than relying on a purely mechanical battery compartment.
Key features and specifications to know
Power setup
- Battery type: 2x AA batteries (each holder takes two 1.5V AA cells)
- Switch: built-in ON/OFF switch on the holder
Wired output for circuit use
- Lead colors: red and black
- Wire length: 5.7 in (14.5 cm)
- Cable insulation diameter: about 1 mm (0.0393 in)
- Lead ends: tinned wire ends for easier connection
Size and build
- Battery case dimensions: 2.71 x 1.34 x 0.75 in (6.88 x 3.4 x 1.9 cm)
- Material: ABS plastic
- Package includes: 2 battery holders and 2 screws
Pros and cons for different buyers
Best for
- Repairs where a device needs a new battery compartment with an inline switch
- DIY electronics projects that want a compact AA power source with wiring leads
- Builders who prefer an external on/off control instead of hard-wired “always on” connections
Who should be careful
- If your project relies heavily on the included screws for secure mounting, plan to verify fit first or be ready to use different hardware
- If your device uses a lot of power and you need long sessions, AA capacity may be a limiting factor regardless of the holder
Installation tips for using the switch and leads
- Identify which lead corresponds to positive and negative for your device wiring before connecting.
- Keep slack manageable, the wire length is 5.7 in, so measure your device enclosure before final placement.
- If the included screws do not seat well, consider alternative mounting methods like zip ties, clips, or adhesive solutions designed for electronics enclosures.
Price and availability
Pricing can vary, so it is worth checking the current listing details and total cost. If you are comparing value, focus on the fact that this bundle includes two holders, each with a switch and wired leads, which can reduce the work needed for multi-point or backup builds.
Verdict
This 2-pack of AA battery holders with an integrated ON/OFF switch and red/black wire leads is a solid, practical pick for repairs and small DIY power projects where wiring convenience matters. The main watch-out is mounting hardware, since some buyers found the provided screws not ideal, but the holders still tend to work reliably once connected and positioned correctly.
FAQs
Quick answers to common questions before you buy.
Is this battery holder compatible with rechargeable AA batteries?
The holder is designed for standard AA batteries at 1.5V each, so it should work with rechargeable AA cells as long as they fit physically and you follow correct polarity when wiring.
How long are the wire leads?
The red and black wire leads are 5.7 inches (14.5 cm) long, measured from the holder to the wire end.
Does it include an on/off switch?
Yes. Each holder includes an ON/OFF switch so you can control power directly at the battery case.
What are the dimensions of each battery case?
Each holder measures 2.71 x 1.34 x 0.75 inches (6.88 x 3.4 x 1.9 cm).
Are the included screws useful for mounting?
Some buyers report the screws provided can be too small or not ideal for their mounting setup. If your application needs screw-tight mounting, consider verifying fit and being ready with alternative hardware if needed.
Is a 2-AA holder enough for long run times?
Battery life depends heavily on your device’s power draw. For high-demand electronics, AA runtime may be limited even with a convenient holder, so plan around your expected usage.
Specifications
| Product Title | (Pack of 2 2 AA Battery Holder with Switch, 2X 1.5V AA Battery Holder Case with Wire Leads and ON/Off Switch |
|---|---|
| Category | Electronics > Household Batteries, Chargers & Accessories > Battery Holders |
| Brand | LampVPath |
| Manufacturer | LampVPath |
| Model Number | 2AA-Switch-Cable-2P-NEW-1 |
| Item Weight | 0.04 Kilograms |
| UPC | 619470453454 |
| Battery Capacity | 1.5 Volts |
| Voltage | 1.5 Volts |
| Reusability | Rechargeable |
| Unit Count | 2 Count |
| Battery Weight | 19 Grams |
| Antenna Location | Holder |
| Recommended Uses For Product | Holder |
Available variants
Item Package Quantity
- 20
- 1
- 40
Recommended next
Comecase Battery Organizer Storage Case, Battery Vault Carrying Container Bag review
The Comecase battery organizer storage case is a high-capacity, EVA foam-lined holder designed to keep AA, AAA, C, D, 9V, and button-cell batteries separated and easier to find. A removable BT-168 digital tester is included to quickly check 1.5V and 9V battery power, but it is not meant to replace a charger, and the organizer can be a bit labor-intensive to set up when you first remove the foam pieces.
2Pcs 2 x 1.5V AA Battery Holder Case Box, 2 AA Battery Holder with Wire Leads
This two-pack AA battery holder case with wire leads is a simple, low-profile way to power small electronics that need 2 x 1.5V AA batteries. Buyers report it’s easy to install, works reliably for projects like sensors and battery replacements, and holds up well outdoors in at least one longer-use case.
Milwaukee M12 Battery Holder | Milwaukee 12V Battery Holder | Milwaukee Battery Wall Mount, Black
A simple, wall-mounted way to store Milwaukee M12 (12V) batteries in one place. It’s built from injection-molded ABS, mounts into wood or drywall, and comes with screws plus drywall anchors. The main tradeoff is battery-size fit, since not all battery lengths may line up side-by-side the same way.
T-H Marine Battery Holder Tray with Stainless Steel Buckle for 31 Series Batteries
The T-H Marine battery holder tray is built for Group 31-style marine batteries, using a stainless steel buckle and corrosion-resistant materials to help prevent movement in a boat or RV compartment. Easy installation is a recurring highlight, but fit depends on your battery size and the mounting hardware situation (it may not include self-tapping screws).