(Pack of 4 AAA Battery Holder, 2 X 1.5V AAA Battery Holder with Leads)
Quick take
This 4-pack gives you two standard 2xAAA holders plus two matching 2xAAA holders with pre-attached red/black leads, making it easier to wire batteries into DIY electronics or replace a missing battery compartment. Each 2xAAA holder is designed for a 3V output (2 x 1.5V AAA). The tradeoff is simple design, there is no on/off switch and no protective cover, so it is best for projects where you can manage power routing yourself.
Pros and cons
Pros
- Includes both plain 2xAAA holders and 2xAAA holders with red/black leads for wiring.
- 3V output per 2xAAA holder (for devices expecting 2xAAA battery compartments).
- Leads use tinned wire ends and are about 5.9 in (15 cm) long, helpful for prototyping.
- Buyer feedback highlights solid fit and terminals that work well for making repairs or projects.
Cons
- No built-in on/off switch, so you may need a separate switch or controller.
- No battery cover included, which may be less ideal for applications exposed to bumps or debris.
- It is sized for AAA cells, so it will not fit devices designed for other battery formats.
What buyers think
Buyer-review evidence is limited but consistent on the practical use cases. The most common themes are that the holders fit as expected, work reliably for basic battery-powered projects, and the terminals help when swapping battery power into older or DIY devices. Reviewers also describe them as a good option for replacing missing battery compartments and enabling rechargeable-friendly builds, though detailed performance metrics like runtime are not widely covered.
What you are getting
This pack includes 4 battery-holder cases designed for AAA cells. It mixes two types: standard 2xAAA holders and 2xAAA holders with attached leads. That combination is helpful when your project needs both a conventional battery compartment and a wired connection point.
Key specs that matter for buying
Battery format and voltage
- Battery type: AAA (1.5V cells)
- Per-holder voltage: 3V from a 2xAAA holder (2 x 1.5V)
Lead wiring details (for the 2xAAA-with-leads units)
- Wire length: about 5.9 in (15 cm)
- Wire ends: tinned wire ends
- Polarity: red connects to the positive side, black connects to the negative side
Size and weight
- Single 2xAAA holder dimensions: 2.082 x 0.948 x 0.516 in (about 5.29 x 2.41 x 1.31 cm)
- Weight (with leads, per holder): about 0.176 oz (5 g)
DIY extension options (useful if your project needs higher voltage)
If you are building a multi-cell pack, these holders can be combined in a series-style DIY configuration. The included guidance describes joining multiple 2xAAA-with-leads holders to create higher-voltage configurations (for example, combining two for a 6V-style setup, three for a 9V-style setup, or four for a 12V-style setup). Whether that matches your device depends on your wiring plan and the exact power requirements of what you are powering.
Pros and cons for different buyers
Best for
- DIY electronics projects where you want quick, repeatable battery connections.
- Repairing battery compartments in older or off-brand devices that accept two AAA cells.
- Prototyping when you need a leaded battery source without committing to a custom pack.
Who should look elsewhere
- Outdoor or enclosure-free builds where you need a cover and physical protection for the cells.
- Projects that require an integrated power switch in the battery compartment.
- Devices needing a different battery format (these are specifically for AAA).
Value and how to decide if it is worth it
This is a straightforward, budget-friendly way to get both plain and leaded 2xAAA battery holders in one set. It tends to be most valuable when you need spare compartments for multiple builds or when you want one set for a conventional fit and another for wiring into your circuit. If your project needs a sealed housing, built-in switching, or a different voltage arrangement, you may prefer a purpose-built battery pack instead.
Frequently asked questions
What is the output voltage of the holder?
Each 2xAAA holder is designed for 3V output using two 1.5V AAA batteries.
Do the leaded versions include red and black wires?
Yes. The red wire connects to the positive side and the black wire connects to the negative side, with about 5.9 in (15 cm) of wire and tinned wire ends.
Is there an on/off switch on these battery holders?
No, these holders do not include an on/off switch.
Is there a cover for the battery compartment?
No cover is included.
Can I combine multiple holders for higher voltage projects?
You can combine holders in DIY configurations for higher-voltage setups, based on how you wire them in series. Make sure your wiring matches the power requirements of your device.
Specifications
| Product Title | (Pack of 4 AAA Battery Holder, 2 X 1.5V AAA Battery Holder with Leads |
|---|---|
| Category | Electronics > Household Batteries, Chargers & Accessories > Battery Holders |
| Brand | LampVPath |
| Manufacturer | LampVPath |
| Model Name | AAA |
| Model Number | 2AAA-4P |
| Item Weight | 4.99 g |
| UPC | 619470452709 |
| Battery Capacity | 1.5 Volts |
| Voltage | 3.7 Volts |
| Reusability | Single Use |
| Unit Count | 4 Count |
Recommended next
Comecase Battery Organizer Storage Case, Battery Vault Carrying Container Bag review
The Comecase battery organizer storage case is a high-capacity, EVA foam-lined holder designed to keep AA, AAA, C, D, 9V, and button-cell batteries separated and easier to find. A removable BT-168 digital tester is included to quickly check 1.5V and 9V battery power, but it is not meant to replace a charger, and the organizer can be a bit labor-intensive to set up when you first remove the foam pieces.
(Pack of 12 CR2032 2025 2015 Battery Holder, Coin Cell Button Socket Holder Case, CR2032 2025 2015 Coin Cell Battery Holder with 2 Pin Solder Mounting Lead)
This 12-pack of CR2032/CR2025/CR2016 coin-cell battery holders (BS-3) is designed to help you replace a soldered coin cell setup with a serviceable holder using 2-pin solder leads. It is a practical, budget-friendly option for electronics repairs, especially when you need easy future swaps, but it can be a tight physical fit in some enclosures and PCBs.
GlossyEnd Set of 4 - Two C and Two D Battery Storage Box (Clear)
The GlossyEnd set includes four clear plastic battery storage boxes, designed specifically for organizing C and D batteries. Snap lids and built-in separation help keep fresh and dead rechargeable batteries apart, but the boxes are not water resistant, so they are best for indoor storage and light travel use.
Home-X Battery Organizer Storage Case
The Home-X Battery Organizer Storage Case is a slim, clear battery holder for AA, AAA, C, D, and 9-volt batteries, built to prevent rolling and make restocking easier. It can be hung using the built-in loop and closes with a buckle latch, but compartment layout may waste space depending on which battery types you actually use.