(Pack of 12 CR2032 2025 2015 Battery Holder, Coin Cell Button Socket Holder Case, CR2032 2025 2015 Coin Cell Battery Holder with 2 Pin Solder Mounting Lead)
Quick take
This 12-pack of BS-3 coin-cell holders is built for CR2032/CR2025/CR2016 batteries and sold as a repair part with 2-pin solder mounting leads. It is a solid choice for projects where you want a safer, easier battery swap than soldering coins directly, but expect the plastic body and pins to be a tight fit in some PCBs or compact enclosures.
Pros and cons
Pros
- Service-friendly: designed to replace a soldered coin cell with a holder you can swap later.
- Works with common 3V coin cells (CR2032, CR2025, CR2016) at a 3V output.
- Includes 12 holders plus 2-pin tinned solder leads, useful for multiple repairs or builds.
- Battery is held securely, with a tight spring reported by buyers.
Cons
- Physical fit can be tight, and some installs required bending pins or making small clearances.
- The plastic base may not sit flush on certain PCB pads or in space-sensitive enclosures.
- Designed for a specific lead and footprint style, so you need to confirm the opening and height work for your device.
What buyers think
Buyer-review evidence is mixed but useful for fitment. Multiple users report successful installs when replacing a battery in real-world electronics, including vintage or compact devices, with the main benefit being the ability to make future battery changes easier. Several buyers also mention a snug, secure battery connection.
On the drawback side, review evidence points to recurring fitment realities: the mounting can be tight, pins may need careful bending to match the PCB hole spacing, and in at least one case the plastic base thickness prevented a flush mount without modifications.
What this battery holder is for
This BS-3 coin-cell holder is intended for devices that use 3V CR2032, CR2025, or CR2016 batteries and need a mounting option that uses two solder leads. It is especially relevant when your current setup uses a soldered coin cell (or a corroding, aging battery connection) and you want a more serviceable replacement that keeps the battery in place.
Key specs to check before you buy
Battery compatibility
- Supports CR2032, CR2025, and CR2016 coin cells (rated 3V output).
Mounting and leads
- 2-pin solder mounting lead design, with tinned wire ends.
- Form factor is a plastic ABS holder, black in color.
Size and weight (for enclosure clearance)
- Approximate holder dimensions: 1.07 in (length) x 0.88 in (diameter) x 0.24 in (height), or about 2.71 cm x 2.22 cm x 0.6 cm.
- Approximate weight per holder: 0.06 oz (1.8 g).
Pros and cons in real repair terms
When it makes sense
- You are swapping a 3V coin cell in a device that benefits from an accessible battery holder.
- You are comfortable with careful PCB soldering and, if needed, minor mechanical adjustments like pin bending for alignment.
- You want a multi-pack, so one holder can cover several projects or spare parts for future fixes.
When you should be cautious
- Your PCB or enclosure is very space constrained, especially if you need the plastic body to sit flush against pads or within tight vertical clearance.
- Your existing battery socket footprint is uncommon, because the holder relies on its own lead spacing and geometry.
- You need a guaranteed drop-in replacement without any adjustment, since at least some installs reportedly required extra clearance work.
Buying guide: how to choose the right coin-cell holder
Coin-cell holders look similar at first glance, but fitment usually comes down to three factors: battery type compatibility, mounting style (solder leads vs. snap-in or surface-mount), and physical clearances (height and how the plastic base interacts with PCB pads).
- Confirm battery size: If your device uses CR2032, CR2025, or CR2016, this holder is intended for those 3V coin cells.
- Match the mounting style: This is built around 2-pin solder mounting leads, not a different connector type.
- Check hole spacing and clearance: If your device’s PCB openings do not line up, be prepared for careful bending or additional clearance work.
- Plan for serviceability: A holder can make future swaps quicker and reduce stress on battery leads compared to soldering coins directly.
Verdict
This 12-pack coin-cell battery holder is a practical option if your main goal is to make 3V CR2032/CR2025/CR2016 battery replacement easier in electronics. Just treat physical fitment as the key variable: reviews suggest it can be snug and may require small alignment or clearance adjustments, so it is best for builders and repairers who can do light mechanical fine-tuning.
FAQ
Is this holder compatible with CR2032, CR2025, and CR2016 batteries?
Yes. It is intended for 3V coin cells including CR2032, CR2025, and CR2016.
What mounting method does it use?
It uses a 2-pin solder mounting lead design with tinned wire ends.
Will it fit a tight PCB space or mounting pads?
Fitment can be tight. Some installs reportedly required bending the solder leads and creating small clearances, and in at least one case the plastic base did not mount flush without modifications. Measure height and pad clearance before committing.
Is the battery held securely?
Review evidence indicates the spring and contact tension can be snug, helping keep the battery seated during normal use.
Is this a good choice for vintage electronics battery swaps?
It can be, particularly when you are replacing a coin-cell battery connection you want to access later. As with any holder, confirm the physical footprint and lead spacing match your device or can be adjusted during installation.
Specifications
| Product Title | (Pack of 12 CR2032 2025 2015 Battery Holder, Coin Cell Button Socket Holder Case, CR2032 2025 2015 Coin Cell Button Battery Holder with 2 Pin Solder Mounting Lead |
|---|---|
| Category | Electronics > Household Batteries, Chargers & Accessories > Battery Holders |
| Brand | LampVPath |
| Manufacturer | LampVPath |
| Model Number | CR2032-BS-3-12P |
| Item Weight | 1.8 Grams |
| UPC | 619470452952 |
| Battery Capacity | 3 Volts |
| Voltage | 3 Volts |
| Reusability | Single Use |
| Unit Count | 1 Count |
| Battery Weight | 1.8 Grams |
| Antenna Location | Watch |
| Recommended Uses For Product | Watch |
Recommended next
Comecase Battery Organizer Storage Case, Battery Vault Carrying Container Bag review
The Comecase battery organizer storage case is a high-capacity, EVA foam-lined holder designed to keep AA, AAA, C, D, 9V, and button-cell batteries separated and easier to find. A removable BT-168 digital tester is included to quickly check 1.5V and 9V battery power, but it is not meant to replace a charger, and the organizer can be a bit labor-intensive to set up when you first remove the foam pieces.
California JOS 3 PCS 9V Battery Connector, 9 Volt Buckle Connector Hard Plastic Shell (T-Type)
The California JOS 3 PCS 9V Battery Connector is a practical 9V-specific clip style connector for repairs and DIY STEM projects, with a hard plastic shell and metal terminal for a sturdier feel. Buyers mainly report easy soldering and solid results for replacing broken 9V battery leads, with one notable caveat about corrosion when left exposed outdoors.
2PCS 3 x 1.5V AA Battery Holder, 3 AA Battery Case Box Holder 4.5-5V with Cover and On/Off Switch, with USB Cable
This 2-pack 3xAA battery holder converts AA power into a 4.5 to 5V output for simple, portable projects like LED strips, toys, and small 5V devices. Buyers praise easy setup and reliable operation, with one major caveat: any device powered this way is only as safe as the battery you insert, because leaking batteries can cause problems.
(Pack of 8 AAA to AA Battery Adapter, AAA to AA Battery Converter Holder, AAA to AA adapter for Battery Converter AAA to AA
These AAA to AA battery adapters (8-pack) let you use AAA batteries in devices that normally require AA batteries. They’re a simple, compact fix for flashlights, emergency kits, and everyday gadgets, with the main caveat being that fit can vary slightly by device and AAA brand.