(Pack of 2 9v Battery Holder, 9 Volt Battery Holder with Switch, 9v Battery Case with Switch)
Quick take
This 2-pack 9V battery holder set includes an on/off switch on each case plus red and black tinned wire leads for powering small DIY builds. It is best for makers who want a simple, compact power solution for a 9V device. The main thing to watch is that proper battery seating can matter, since some users report the battery may disconnect inside the holder if it is hit hard on the bottom.
Pros and cons
Pros
- Two separate 9V holders, each with an integrated on/off switch for easier project wiring
- Comes with red/black wire leads (about 5.8 in / 14.8 cm) and a tinned wire end
- Compact size (about 2.66 x 1.30 x 0.84 in) and lightweight (about 19.1 g per holder with screw)
- Simple installation, includes screws for mounting the 9V battery case
Cons
- Battery contact can be sensitive to how the battery sits inside, with reports of disconnection when the holder is tapped hard
- Only suitable for 9V batteries, not other common voltages
- Uses wired leads rather than a snap connector, so you will still need to connect to your circuit appropriately
What buyers think
Buyer feedback is broadly positive for everyday utility in hobby projects and small builds, especially valuing the presence of an on/off switch and the general functionality of the holders with 9V batteries. A recurring theme is that the holders work as expected once installed, but battery seating matters.
Who these 9V battery holders are for
Choose this 2-pack if your project uses a 9V battery and you want a straightforward power compartment with a built-in switch. They are especially well-suited to:
- Hobby and DIY electronics where you need quick on/off control
- Small costumes and seasonal builds that benefit from a compact battery case
- Bench repairs or prototypes where you want clean wire leads (red and black) instead of bare battery terminals
- Projects that require two battery holders, such as one for each module or for two separate prototypes
What you get (key specs that matter)
- Battery type: 9V battery (1 x 9V per holder)
- Switch: on/off switch integrated into each battery case
- Leads: red and black wire leads with tinned wire ends
- Wire length: 5.8 in (14.8 cm)
- Dimensions: approximately 2.657 in x 1.299 in x 0.835 in (6.75 cm x 3.30 cm x 2.12 cm)
- Material: plastic ABS case
- Weight: about 0.674 oz (19.1 g) per holder with screw
- Package contents: 2 battery holders with switch, plus screws for installation
Pros and cons, in plain English
Pros that make a difference in real projects
- Switch built in: You can turn your circuit on and off without adding extra switches, simplifying wiring and enclosure layout.
- Wire leads are ready for connection: The red/black leads with tinned ends are convenient for typical DIY connections.
- Good size for small enclosures: The compact footprint helps it fit in tight project cases.
Limitations to plan for
- Battery seating sensitivity: If your project involves moving the enclosure or tapping it, take care that the battery is securely placed. If needed, a spacer approach may help stabilize the fit (based on limited buyer feedback).
- Wired leads still require integration: You will need to connect the leads to your circuit (soldering, terminal blocks, or appropriate connectors), since this is a holder plus leads, not a fully assembled power module.
- Only compatible with 9V batteries: If your device needs another battery size or voltage, this will not match.
Price and availability
Check current pricing and stock status on the product page, since costs can change for 2-packs and similar 9V holder options. If you need more than two holders, it can be worth comparing multi-packs versus buying individual holders to match your project count.
Is it worth it?
This 2-pack 9V battery holder is a good value-oriented choice for DIY builders who want compact 9V power with an integrated on/off switch and pre-attached wire leads. It is less ideal if your design needs a holder that is completely insensitive to battery contact seating under vibration or rough handling, unless you plan to secure the battery position inside the case.
View latest price on Amazon: Buy on Amazon
FAQ
Will this battery holder work with any 9V battery?
It is designed for 9V batteries, and each holder supports one 9V cell. Use a compatible 9V battery type that fits securely in the holder’s internal contacts.
How long are the wire leads?
The wire leads are about 5.8 inches (14.8 cm) long, with red and black conductors and tinned wire ends.
Does it include screws for mounting?
Yes. The package includes screws for the battery holder case.
Is there an on/off switch built in?
Yes. Each 9V battery holder in the 2-pack includes an integrated on/off switch on the case.
What is the main downside to consider?
Some buyer feedback suggests the battery contact can be sensitive if the holder is tapped hard on the bottom, so ensuring the battery is properly seated in your enclosure is important.
Can I use this for non-9V projects?
No. This holder is specific to 9V batteries, so it is not appropriate for 1.5V, AA, AAA, or other voltages without redesigning the power system.
Specifications
| Product Title | (Pack of 2 9v Battery Holder, 9 Volt Battery Holder with Switch, 9v Battery Case with Switch |
|---|---|
| Category | Electronics > Household Batteries, Chargers & Accessories > Battery Holders |
| Brand | LampVPath |
| Manufacturer | LAMPVPATH |
| Model Name | LAMPVPATH |
| Model Number | 9V-Switch-2PC |
| Item Weight | 19.05 g |
| Number of Batteries | 1 9V batteries required. |
| UPC | 739340317751 |
| Battery Capacity | 9 Volts |
| Voltage | 9 Volts |
| Reusability | Rechargeable |
| Unit Count | 2 Count |
| Battery Weight | 19.1 Grams |
| Item Dimensions | 2.66 x 1.3 x 0.84 inches |
| Antenna Location | Holder |
| Recommended Uses For Product | Holder |
Recommended next
Comecase Battery Organizer Storage Case, Battery Vault Carrying Container Bag review
The Comecase battery organizer storage case is a high-capacity, EVA foam-lined holder designed to keep AA, AAA, C, D, 9V, and button-cell batteries separated and easier to find. A removable BT-168 digital tester is included to quickly check 1.5V and 9V battery power, but it is not meant to replace a charger, and the organizer can be a bit labor-intensive to set up when you first remove the foam pieces.
9V Battery Connector,10 PCS T-Type 9 Volt Buckle Connector Hard Plastic Shell Used in Student Experiment,or Other Equipment with Battery
This 10-pack of 9V T-type battery connectors is built for quick DIY wiring and replacing worn-out 9V battery leads. With a hard plastic shell for protection and tin-dipped wire ends for easier connection, it is a practical choice for school experiments and small electronics fixes, as long as you are using 9V batteries only.
JJC AA AAA Battery Case Holder for 20 Double A and 14 Triple A with Removable Tester
The JJC AA/AAA battery case holder stores up to 20 AA and 14 AAA batteries in snug slots, helping prevent shorting and keeping cells organized. A removable AA/AAA tester with three indicator levels adds convenience, while the hard ABS shell, foam lining, snap closure, and silicone sealing ring are designed for everyday protection from dust, moisture, and shock. Best for anyone who wants a dedicated, compact home or garage organizer, with the caveat that the tester provides a rough status check, not a precision measurement.
5Pcs 2X 1.5V AA Battery Holder Case with On/Off Switch and Wire Leads
A simple 2-AA battery holder kit that comes in a five-pack, each with a slide on/off switch and pre-wired red and black leads. It is a practical choice for DIY electronics, breadboard power, and quick repairs where you need a compact, screw-mountable AA power box, with the main tradeoff being the basic, light-duty build typical of inexpensive holders.