ZIDIYORUO UTV Whip Light Mount for 1.75"-2" Roll Cage Bars
Quick take
This 2-pack whip light and flag mount is built for UTV roll cages with 1.75" to 2" bars, using CNC-machined 6061 aluminum and a micro-serrated clamp that is meant to resist slipping. The key tradeoff is fitment, you need the correct bar diameter (and circumference) or you may have to size up.
Pros and cons
Pros
- CNC-machined 6061 aluminum construction aimed at a strong, corrosion-resistant build
- Micro-serrated clamp design intended to grip 1.75" to 2" roll cage bars
- Full 360° rotation helps you fine-tune whip or flag angle
- Includes mounting hardware, making installation straightforward
Cons
- Only fits roll cages in the 1.75" to 2" range, incorrect bar size means it may not clamp properly
- Buyer feedback suggests install is easy, but setup still depends on lining up your bar measurement before ordering
What buyers think
Buyer review evidence for this mount is focused on sturdiness, ease of installation, and whether the clamp holds up on rough trails. Multiple comments describe the brackets as well built and secure, with at least one report stating the whips stayed in place after towing and riding over rough terrain. Installation is commonly described as quick and easy, likely aligning with the included hardware. The most consistent fit-related theme is that the mount needs the correct roll bar size, since there are reports of returning it because it did not fit a specific Jeep roll bar setup.
What this mount is for
The ZIDIYORUO whip light mount is a clamp-style accessory meant to attach whip lights and flags to off-road roll cages. If you are adding trail visibility, caution signaling, or simply finishing a safety-focused lighting setup, this mount is designed to hold your whip or flag securely while still allowing you to aim it where you need it.
Key features that matter in real use
6061 aluminum build
These brackets are precision-machined from solid 6061 aluminum. For off-road gear, the practical benefit is a sturdy base that is also designed to resist corrosion.
Micro-serrated grip for 1.75"-2" bars
The internal clamp uses micro-serrated teeth intended to bite into the roll cage bar and reduce slipping. Hardware is included, and the clamp is specifically intended for roll cages in the 1.75" to 2" diameter range.
360° rotation for positioning
A full 360° rotation lets you adjust the whip or flag angle. This helps when you are trying to avoid interference with nearby accessories or you want the whip to track the line of your vehicle’s movement and airflow.
2-pack value for multiple locations
This set includes two mounting brackets. That typically works well if you want whip lights or flags in more than one spot on your roll cage, or if you prefer having a spare bracket for future updates.
Fitment and sizing: the part to double-check
This mount is for 1.75" to 2" roll cage bars. The guidance also includes circumference measurement, listed as 5.5" to 6.28".
Pros and cons (expanded)
Pros
- Sturdy, aluminum construction built for off-road mounting
- Clamp design aims to prevent movement on 1.75"-2" roll cages
- 360° rotation supports fine aiming for better visibility and clearance
- Hardware included, which helps installation go quickly
Cons
- Strict size requirement, if your roll cage bar is outside the 1.75"-2" range, you will likely need a different clamp size
- Rotation helps positioning, but you still need to set it correctly during installation so the whip or flag sits where you want
Who should buy
- UTV owners building or updating a whip light and flag setup on roll cages with 1.75"-2" bars
- Riders who want adjustable aiming, using the mount’s full 360° rotation
- Shoppers looking for a 2-pack option for adding mounts at more than one location
Who should avoid
- Anyone whose roll cage bars do not match the 1.75" to 2" sizing guidance (including circumference)
- Buyers who want a universal mount that works across different bar diameters without sizing measurements
Verdict
The ZIDIYORUO UTV whip light mount is a solid choice when your roll cage is truly within the 1.75" to 2" range. Reviews lean toward “stays put” performance and easy installation, and the 360° rotation is a practical upgrade for dialing in visibility and clearance. The main buying caveat is sizing accuracy, measure your bars first to avoid a return.
FAQ
What roll cage bar size does this whip light mount fit?
It is designed for roll cage bars with a diameter of 1.75" to 2" (circumference guidance listed as 5.5" to 6.28").
Does the mount rotate to adjust the whip or flag angle?
Yes, it features full 360° rotation so you can position the whip light or flag at the angle you want.
Is this a single mount or a two-pack?
It is a 2-pack set, with two mounting brackets included.
Is the clamp designed to prevent slipping?
The mount uses micro-serrated teeth on the clamp interior intended to grip the roll cage bar and help prevent slipping.
What is included for installation?
The kit includes the necessary screws and mounting hardware for attaching the brackets to your roll cage with basic tools.
Will it fit my Jeep or specific UTV model?
It is meant for 1.75"-2" roll cage bars. Model compatibility depends on your bar size, so the safest approach is to measure your roll cage diameter and circumference before purchasing.
Specifications
| Product Title | ZIDIYORUO UTV Whip Light Mount for 1.75"-2" Roll Cage Bars, 2-Pack 3 Colors | CNC-Machined Aluminum Alloy · 360° Rotation · Flag & Light Bar Compatible · Works with Polaris RZR, Can-Am, Jeep |
|---|---|
| Category | Automotive > Motorcycle & Powersports > Accessories > Electronics > Electrical Device Mounts |
| Brand | ZIDIYORUO |
| Manufacturer | Zidiyoruo |
| Model Number | flagmount001 |
| Color | Black |
| Material | Aluminum |
| Item Weight | 0.8 Kilograms |
| Brand Name | ZIDIYORUO |
| UPC | 754188755961 |
| Set Name | 2 Pack |
| Manufacturer Part Number | whipmount001 |
| Item Type Name | UTV whip mount |
| Item Dimensions | 4.8 x 3.1 x 1.78 inches |
| Unit Count | 2.0 Count |
| Item Depth | 4.8 inches |
| Material Type | Aluminum |
| Mounting Type | Clamp Mount |
| Finish Types | Painted |
| Item dimensions L x W x H | 4.8 x 3.1 x 1.78 inches |
Available variants
Color
- Black
- Blue
- Red
Size
- 2 pcs
- 1pc
Recommended next
Roam Universal Black Net Bike Phone Mount Holder, 360° Rotation
The Roam Universal net phone mount is a tool-free handlebar mount designed for phones up to about 3.6 in wide, with a 360-degree ball-socket style rotation for landscape or portrait GPS viewing. It’s a solid pick for cyclists and riders who want full phone access and reduced vibration on rough roads, with the main caveat being that bulky/wallet cases may prevent the included corner supports from reaching properly.
Quad Lock 12V-24V Waterproof Wireless Charging Head - Hardwired, IP67 Rated, Fast Charging, Secure Phone Mount
The Quad Lock hardwired wireless charging head adds weather-ready, mount-integrated charging for motorcycles. It’s built for stable dual-stage locking and an IP67 waterproof design, with up to 15W output (iPhone up to 7.5W). The main tradeoff is compatibility and fit considerations, including the phone/mount ecosystem and hardwiring to a 12V-24V power source.
Lamicall Bike Phone Mount Holder - Motorcycle Phone Mount, Adjustable Cell Phone Holder
The Lamicall Bike Phone Mount Holder is a universal handlebar cradle designed for phones roughly 4.7 to 6.8 inches. It focuses on a secure, locked clamp with silicone protection, plus 360° rotation for switching between landscape and portrait use like navigation, music, and hands-free calls.
Lamicall Motorcycle Phone Mount, Bike Phone Holder (Metal Safety Lock)
The Lamicall Motorcycle Phone Mount is a universal handlebar phone clamp designed for 4.7 to 6.8-inch phones, with a 360-degree adjustment ball and a metal safety lock for extra steadiness on the ride. It’s positioned as quick to install (no tools) and uses rubber pads to help prevent scratches and slipping, but the fit depends on your phone size and case thickness.