Quad Lock 12V-24V Waterproof Wireless Charging Head - Hardwired, IP67 Rated, Fast Charging, Secure Phone Mount
Quick take
This hardwired Quad Lock charging head is designed to keep a compatible smartphone charged while you ride, with an IP67 waterproof build and a dual-stage Quad Lock-style secure lock. It supports wireless charging up to 15W (iPhone up to 7.5W), but you must be ready to hardwire it to a 12V-24V power source and ensure your phone and Quad Lock ecosystem are compatible.
Pros and cons
Pros
- IP67 waterproof design for wet-weather riding.
- Hardwired 12V-24V setup for continuous charging, no USB cable dangling.
- Secure dual-stage lock helps keep your phone firmly in place.
- Wireless charging output up to 15W (iPhone up to 7.5W) for on-the-bike power.
Cons
- Hardwiring is required, and the included 1.5m cable may be too short for some installs.
- Compatibility depends on the phone and your Quad Lock motorcycle mount/accessory setup.
- It doesn’t include the full mount system, so you may need additional Quad Lock parts.
What buyers think
Buyer-review evidence centers on reliable charging while riding, with multiple comments describing fewer “dead battery” situations during longer trips that use navigation. Install feedback is generally positive, especially for riders who prefer a cleaner setup without a charging plug. A recurring practical note is cable length, with some riders wishing the hardwired lead were longer for routing to a power source. Review evidence also suggests there can be phone compatibility limitations, with at least one report indicating the charger shut off quickly with certain Pixel models, even after troubleshooting.
How it works and what makes it different
The Quad Lock 12V-24V Waterproof Wireless Charging Head is built to integrate charging into your motorcycle phone setup. Instead of powering your phone with a port cable, the head locks your phone in place using a secure dual-stage mechanism and then delivers wireless charging from a hardwired connection to a 12V-24V power source.
Key specs that matter for motorcycle use
- Power input: requires hardwiring to 12V-24V.
- Wireless charging output: 5W to 15W (iPhone up to 7.5W).
- Water resistance: IP67 waterproof design, intended for rain and messy weather.
- Build materials: aluminium rear and glass-filled nylon front.
- Cable: 1.5m hardwired cable with fly leads.
- Mounting compatibility: compatible with Quad Lock Motorcycle Mounts & Accessories and Quad Lock 360 products, though the charging head is not a complete mount kit.
Pros and cons for different riders
Best for riders who want charging without a port cable
If you use navigation or run apps on the road, a hardwired wireless setup can reduce plug-and-unplug hassle and keep the charging connection protected by the mounting system. The IP67 rating is a good match for riders who frequently ride in wet conditions.
Who should consider something else
This head may not be ideal if you are not comfortable with hardwiring, if your power-source location requires more cable than the included 1.5m length, or if you need guaranteed performance with a specific phone model where compatibility may be uncertain.
Installation and fit considerations (the real-world gotchas)
- Plan your power routing: reviewers mention that the 1.5m cable can be tight depending on how far the handlebar area is from your fuse box or battery/power connection point.
- Confirm your Quad Lock ecosystem: the charger head is meant to work with Quad Lock motorcycle mounts/accessories and Quad Lock 360 products. If your current setup is different, you may need additional parts.
- Check phone compatibility expectations: wireless charging behavior can vary by device. One review reported an issue with certain Pixel models shutting off quickly after a short time, which is a caution to verify compatibility before committing.
Is the Quad Lock charging head worth it?
It’s likely worth the cost if you want a weather-ready, hardwired wireless charging solution that stays neat and secure while you ride, and if you already plan to use (or are willing to build) a Quad Lock motorcycle mounting setup. The decision becomes less straightforward if your install layout needs longer cable than provided, you do not want to hardwire, or your phone model has uncertain wireless charging behavior with this specific head.
Alternatives to consider (based on your priorities)
- If you want no hardwiring: consider a charging mount that uses a built-in charging cable to a USB port or a simpler power adapter approach, trading weather sealing convenience for easier installation.
- If you ride mostly in dry conditions and want flexibility: lower-profile wireless charging mounts may simplify setup, but they may not offer the same IP67-style waterproofing focus.
- If you already have a Quad Lock setup: staying within the Quad Lock ecosystem can reduce compatibility friction, since this head is designed to integrate with their motorcycle and 360 products.
FAQs
Does this require hardwiring to my motorcycle?
Yes. It’s designed for continuous use and requires a hardwired connection to a 12V-24V power source.
What charging speed does it support?
It supports wireless charging output in the range of 5W to 15W, with iPhone charging up to 7.5W.
Is it actually waterproof for riding in the rain?
It is built with an IP67 waterproof design, intended to withstand wet weather and exposure to the elements during rides.
Does it include a phone mount?
No. It’s a charging head designed to work with compatible Quad Lock motorcycle mounts/accessories and Quad Lock 360 products, so you may need additional Quad Lock parts.
How long is the cable?
The included hardwired cable is 1.5m with fly leads. Some installs may require additional planning for routing length.
Will it work with any smartphone?
It’s intended for cellular phones, but wireless charging performance and behavior can vary by phone model. Compatibility should be checked before purchase, especially if your phone is not commonly supported by typical Qi-style behavior.
Specifications
| Product Title | Quad Lock 12V-24V Waterproof Wireless Charging Head - Hardwired, IP67 Rated, Fast Charging, Secure Phone Mount |
|---|---|
| Category | Automotive > Motorcycle & Powersports > Accessories > Electronics > Electrical Device Mounts |
| Brand | Quad Lock |
| Manufacturer | Quad Lock |
| Model Number | QLH-HW-WCH-2 |
| Color | Black |
| Item Weight | 0.13 Kilograms |
| Compatible Devices | Cellular Phones |
| Compatible Phone Models | Smartphone |
| Mounting Type | Tabletop Mount |
| Additional Features | Travel |
| Compatible with Vehicle Type | Motorcycle |
| Connector Gender | Male-to-Male |
| Unit Count | 1.0 Count |
| Mfr Part Number | QLH-HW-WCH-2 |
| Warranty Description | 1 year warranty |
| Enclosure Material | Aluminum, Tough Glass Filled Nylon |
Recommended next
VUP Bike Phone Mount, Universal Bike Cell Phone Holder, 360° Rotatable, Silicone Bicycle Phone Mount
The VUP Bike Phone Mount is a universal silicone handlebar holder for 4.0 to 6.7 inch phones, designed to clamp with elastic straps and rotate 360° for portrait or landscape viewing. It’s an affordable option that many riders find secure with a phone that never seems to pop out, with the main tradeoff being a bit of movement on rough rides.
Lamicall Bike Phone Holder, Motorcycle Mount
The Lamicall bike and motorcycle phone holder is a clamp-style handlebar mount designed for 4.7 to 6.8-inch smartphones (up to 15mm thick, including most cases). It’s built around a corner-grip design with silicone pads, plus a red rear lock for added security on bumpy rides. The main caveat is fit, especially if your phone plus case is near the maximum thickness.
Roam Universal Black Net Bike Phone Mount Holder, 360° Rotation
The Roam Universal net phone mount is a tool-free handlebar mount designed for phones up to about 3.6 in wide, with a 360-degree ball-socket style rotation for landscape or portrait GPS viewing. It’s a solid pick for cyclists and riders who want full phone access and reduced vibration on rough roads, with the main caveat being that bulky/wallet cases may prevent the included corner supports from reaching properly.
JOYROOM Motorcycle Phone Mount Holder (Dual Vibration Dampener, Metal Extension Clamp)
The JOYROOM Motorcycle Phone Mount Holder is built for riders who want a secure, anti-shock phone setup for GPS, music, and calls. It uses a vibration dampening design, a metal extension clamp with wide angle adjustment, and a one-hand press-to-lock style, but it has clear case and phone fit limits, including possible issues with bulkier cases and some Samsung Ultra models.