BRCOVAN Anti-Theft Motorcycle Phone Mount Holder with Vibration Dampener & High-Speed Secure Lock
Quick take
The BRCOVAN mount is a vibration-dampened, lock-focused phone cradle for handlebars or rear-view mirrors, built around PA66+GF30% material and stainless steel telescopic rods. It’s designed for 5.4 to 7.2 inch phones and targets riders who want a secure fit, quick one-handed insertion, and harder-to-remove mounting hardware. The main limitation is compatibility: if your phone (including a case) sits outside the listed screen-size and holder dimensions, it may not fit properly.
Pros and cons
Pros
- Secure retention system with a back knob lock, plus a safety screw intended to make removal more difficult.
- Includes vibration dampener and soft silicone contact surfaces to help protect the phone and camera area.
- Adjustable size and dual support style (handlebar base and rear-view mirror base) for different bike and scooter setups.
- 360-degree style flexibility, with 720-degree rotation for switching between landscape and portrait.
Cons
- Phone fit is limited to listed screen diagonal and holder dimensions, so larger or unusually thick cases may be a mismatch.
- The rotation and angle adjustments can be more involved than simpler “snap-in” mounts.
- Water resistance is listed as “waterproof,” but the practical level of protection in heavy rain is not detailed.
What buyers think
Buyer-review evidence points to a consistent theme: this mount feels solid and secure once installed, and many riders report stable positioning at highway speeds. People also describe the locking action as dependable, with phones staying put even on bumpy rides. Setup feedback is generally positive, noting that included tools and adapter options make installation manageable on handlebar and mirror configurations. On usability, reviewers frequently highlight one-handed insertion, plus the ability to adjust phone orientation for readability. A smaller number of comments mention wanting a bit more range of motion, suggesting the adjustment range is useful but not perfect for every handlebar or preferred viewing angle. Overall, buyer-review evidence is strongest around stability, build feel, and fit versatility within the stated phone size range.
Who this mount is for
This is a strong fit if you ride a motorcycle, e-bike, scooter, ATV, or similar vehicle and want a phone holder that prioritizes stability and quick, repeatable locking. It’s especially appealing for commuters and road riders who spend time at speed, where phone mounts that feel loose can be distracting. If you like using your phone as a navigation screen, dashboard reference, or dash-cam style recording on the go, the vibration dampener and camera-protection design are directly aligned with that use case.
Key features that matter for daily riding
Anti-theft style design and removal resistance
Instead of relying on only friction, the mount uses a combination approach: you lock the phone with a high-speed secure knob, and you also have a safety screw concept designed to keep the holder from being easily removed. A wrench is included for tightening that safety screw. For riders concerned about leaving the bike parked in public, this extra step can be a practical upgrade over basic clamps.
Vibration dampener plus silicone protection
Road noise and engine vibration can cause camera hardware stress over time, and they can also make screens harder to read. This mount includes a vibration dampener and soft silicone contact areas intended to reduce shake and protect the phone from scratches. There is also a non-contact camera area design that aims to prevent the camera from being squeezed against the mount.
Secure fit and quick one-handed operation
Once your phone is seated, the back knob is designed to tighten down so the phone stays attached even on rough roads. Many users value the one-handed loading and the ability to lock quickly before riding off.
Wide mounting options: handlebars and mirror bases
The mount supports installation on handlebars and can also use a rear-view mirror mounting base (with the included components). It fits handlebars with diameters listed as 0.5 in (12 mm), 0.875 in (22 mm), 1.0 in (25.4 mm), 1.125 in (28.6 mm), and 1.26 in (32 mm). If you are swapping setups between vehicles or mounting positions, having both base styles is a practical advantage.
Fit and compatibility: will your phone work?
This holder is intended for phones with a screen diagonal size between 5.4 inches and 7.2 inches, with adjustable internal dimensions. It also states it holds phones with a case included, and the body length/width/thickness ranges are listed for compatibility. Before buying, compare your phone and case thickness and the overall device size to the mount’s max holder dimensions so you do not end up with a phone that fits loosely or forces the contacts in awkward ways.
Pros and cons, summarized
- Best for: riders who want a sturdy handlebar or mirror-mounted phone cradle, especially for highway use and navigation.
- Also good for: e-bike and scooter owners who want more secure mounting than lightweight accessory mounts.
- Consider if: you need a vibration-dampened setup and prefer a lock knob plus added removal resistance.
- Skip or double-check fit if: your phone and case fall outside the 5.4–7.2 inch screen diagonal range or the listed holder dimensions.
Verdict
The BRCOVAN anti-theft motorcycle phone mount is a practical pick for riders who prioritize stability, vibration reduction, and a locking mechanism that feels more dependable than basic clamps. If your phone sits within the stated size range, you should get a secure, adjustable mount that supports quick one-handed use and easy screen orientation changes for everyday riding. The main decision factor is compatibility, since the holder is not a universal “any phone” cradle for extreme sizes.
Price and availability
Check the current price and availability before ordering to confirm it matches your budget.
FAQ
What phone size does the BRCOVAN mount fit?
It’s designed for phones with a screen diagonal size of 5.4 to 7.2 inches, and it includes adjustable sizing intended to work with cases included.
Does it mount on handlebars only?
No. It supports a handlebar mounting base, and it also includes a rear-view mirror mounting base for alternate placement.
How does the locking mechanism work?
You insert the phone, then tighten the back high-speed secure knob to keep the device attached. It also uses a safety screw concept, tightened with the included wrench, to make removal harder.
Is there vibration protection for the phone and camera area?
Yes. The mount includes a vibration dampener and soft silicone contact surfaces, and it uses a non-contact camera design to help avoid squeezing the camera area.
Can you rotate the phone for portrait and landscape?
Yes. It includes a 720-degree rotation capability for adjusting the phone to horizontal or vertical orientation.
Will it hold securely at high speed?
Buyer feedback commonly describes stable positioning at highway speeds, with the phone staying in place once locked.
Specifications
| Product Title | BRCOVAN Anti-Theft Motorcycle Phone Mount Holder with Vibration Dampener & High-Speed Secure Lock, Adjustable Size Handlebar Cellphone Cradle for Bike Bicycle Scooter ATV, Fit 5.4-7.2'' Smartphone |
|---|---|
| Category | Automotive > Motorcycle & Powersports > Accessories > Electronics > Electrical Device Mounts |
| Brand | BRCOVAN |
| Manufacturer | BRCOVAN |
| Model Name | Motorcycle Phone Mount |
| Model Number | M26-C1 |
| Color | Black |
| Item Weight | 400 Grams |
| Compatible Devices | Smartphones |
| Compatible Phone Models | Compatible with phone screen diagonal size 5.4'' ~ 7.2''. Holds Phones (Case Included) Dimensions: Length 5.03'' (128mm) ~ 7.60'' (193mm), Width 2.48'' (63mm) ~ 3.46'' (88mm), Thickness 0.787'' (20mm ) Max |
| Mounting Type | Handlebars, round rails, rear-view mirror. Fit for handlebars 0.5''(12mm) / 0.875''(22mm) / 1.0''(25.4mm) / 1.125''(28.6mm) / 1.26'' (32mm) in diameter. |
| Additional Features | With Vibration Dampener & High-Speed Secure Knob, Adjustable Length Width Design, Anti-Theft, |
| Water Resistance Level | Waterproof |
| Compatible with Vehicle Type | Motorcycle |
| Shape | Rectangular |
| Enclosure Material | Main body made of PA66+GF30% high-strength material, adopts aluminum alloy handlebar mounting base and rear-view mirror mounting base |
| Mfr Part Number | M26-C1 |
| Warranty Description | 1 Year |
| Built-In Media | (1) Phone mount, (1) Double socket arm, (1) Handlebar mounting base, (1) Rear-view mirror mounting base, (4) Rubber ring inserts, (1) Hexagonal wrench, (1) Specialized Wrench |
Recommended next
Lamicall Bike Phone Holder, Motorcycle Mount
The Lamicall bike and motorcycle phone holder is a clamp-style handlebar mount designed for 4.7 to 6.8-inch smartphones (up to 15mm thick, including most cases). It’s built around a corner-grip design with silicone pads, plus a red rear lock for added security on bumpy rides. The main caveat is fit, especially if your phone plus case is near the maximum thickness.
Roam Universal Black Net Bike Phone Mount Holder, 360° Rotation
The Roam Universal net phone mount is a tool-free handlebar mount designed for phones up to about 3.6 in wide, with a 360-degree ball-socket style rotation for landscape or portrait GPS viewing. It’s a solid pick for cyclists and riders who want full phone access and reduced vibration on rough roads, with the main caveat being that bulky/wallet cases may prevent the included corner supports from reaching properly.
VUP Bike Phone Mount, Universal Bike Cell Phone Holder, 360° Rotatable, Silicone Bicycle Phone Mount
The VUP Bike Phone Mount is a universal silicone handlebar holder for 4.0 to 6.7 inch phones, designed to clamp with elastic straps and rotate 360° for portrait or landscape viewing. It’s an affordable option that many riders find secure with a phone that never seems to pop out, with the main tradeoff being a bit of movement on rough rides.
FREAKMOUNT 2.0 Magnetic Motorcycle Phone Mount
The FREAKMOUNT 2.0 is a billet-aluminum, magnetic motorcycle phone mount designed to attach directly to a metal gas tank using rare-earth magnets, keeping your bars clear. It’s a strong pick if you want a fast, tool-free setup and a mount that can hold on during rough rides, with the main tradeoff being that it does not provide vibration/shock dampening.