YesBes 116in Cord Hider Kit, Cord Covers for Wires on Wall
Quick take
The YesBes 116in Cord Hider Kit is a self-adhesive, paintable cable raceway system for hiding wall cords, especially around a wall-mounted TV. It includes multiple connectors (including L-elbows and a T-fitting) and is cut-to-length, but the adhesive requires careful placement and the narrow channel is best for one to two small cords.
Pros and cons
Pros
- Self-adhesive installation, no drilling (just tear and paste)
- Cuttable and paintable to match your wall color
- Includes connectors for corners and junctions (L-elbows, T-fitting, couplings)
- Designed for a tight channel that can fit small to moderate cable amounts (1 to 2 cords, depending on cord size)
Cons
- Adhesion strength means you need to be precise before you commit
- Tape should not be used on textured walls
- Channel size is narrow, so thicker cable bundles may not fit cleanly
What buyers think
Buyer-review themes are focused on setup simplicity and the finished look. Many shoppers describe the kit as quick and easy to install, noting that the cover snaps over the cords with little effort. Adhesion is widely seen as strong, with one recurring practical note that placement matters because the backing can be harder to peel off after it sets. On white walls in particular, buyers report a clean, “organized” appearance where the kit helps conceal cords for a more professional look. Overall, the buyer-review evidence supports that this is an effective, no-drill cord-hiding solution when your cables fit the channel dimensions.
What this cord hider kit is for
This kit is made for homeowners who want a cleaner look by routing exposed cords along a wall, usually for TV setups, media centers, and other wall-mounted electronics. The paintable, cord-cover design helps the raceway blend in with the wall, while the included corner and junction pieces reduce the need for custom routing.
Key specs that affect fit
Overall length and build
- Total length: 116 inches
- Kit content: 8 pieces total
- Channel size: 0.59 inch inner width, 0.4 inch inner height
- Material: PVC/plastic
How many cables it can hold
The intended capacity is typically 1 to 2 cords (depending on your specific cable thickness and how neatly they sit). If your cables are bundled tightly or have thicker jackets, you may need a wider raceway channel size to keep the cover from feeling tight or forcing the cords out of alignment.
Connectors included
The kit includes 4 couplings plus corner and junction pieces (2 L-elbows and 1 T-fitting) to help you handle common wall layouts, including changes in direction and intersections.
Installation, cut, and finishing
Self-adhesive installation (no drilling)
Installation uses a self-adhesive backing, with a simple tear-and-paste approach. Reviews reinforce that the adhesive can be strong, so take your time with alignment before pressing down. Once you commit, repositioning may become more difficult, and some backing film can lift if you try to peel it up.
Cut to length
If 116 inches is more than you need, you can cut the raceway channel with sharp scissors or a saw to match your route.
Paintable for a more seamless look
Because the cord cover is paintable, you can match the raceway to your wall color, which is especially helpful if you are hiding white cords on a darker wall, or vice versa. This is also a practical way to reduce the visual impact if the raceway will be seen at close range.
Safety and durability considerations
The kit materials are described as having UL94 V-0 high flame retardancy rating, which is intended to provide an extra layer of safety compared to standard materials. For day-to-day cable organization around TVs and electronics, that added fire-retardant design goal is a meaningful spec, especially in family rooms and spaces accessible to kids and pets.
Pros and cons (buyer-fit verdict)
Choose it if
- You want a no-drill cord raceway for a wall-mounted TV or similar setup
- Your cables fit a narrow channel (about 0.59 x 0.4 inch inner dimensions)
- You prefer to paint the raceway to blend into the wall
- Your layout needs common connectors like L-elbows and a T-fitting
Consider alternatives if
- You need to hide thicker cables or bundles that will not sit comfortably within a narrow channel
- You are working with a textured surface where standard adhesion may not perform as intended (tape is not recommended on textured walls)
- You expect frequent re-positioning after installation, since strong adhesive benefits accuracy but can be harder to correct later
How it compares to other cable raceway options (what to check)
When shopping for cord hiders, the biggest decision factors are channel size, installation method, and finishing flexibility. This kit’s self-adhesive approach is ideal if you want a fast setup without drilling, and the paintable PVC channel suits walls where you want the raceway to disappear. If you are consistently running more than two cords, or you need more height/width for cable jackets, a wider raceway product is likely to be a better structural match.
Price and availability
This kit is offered as a budget-friendly, ready-to-install cable raceway system, with listing price shown below in the call-to-action button. If your route requires more than 116 inches, you may want to compare kit lengths and look for bundle options or additional sections to match your wall run.
FAQ
Will this cord hider kit work on textured walls?
The installation instructions note that tape should not be used on textured walls. If your wall surface is textured, consider testing adhesion on a small section first, or choose a raceway system designed for that surface type.
How many cords can fit inside the channel?
The kit is designed for about 1 to 2 cords depending on cable thickness and how neatly they sit within the inner dimensions (0.59 inch inner width, 0.4 inch inner height).
Can I cut the cable raceway to custom length?
Yes. You can cut the cord hider to the length you need using sharp scissors or a saw.
Is it paintable to match my wall color?
Yes. The raceway cover can be painted to blend in with your wall and decor.
Does it require screws or drilling?
No. It uses self-adhesive installation, described as a tear-and-paste method without drilling.
What connectors come with the kit?
The kit includes couplings plus corner and junction pieces, including L-elbows and a T-fitting, to help form turns and intersections along your wall route.
Specifications
| Product Title | YesBes 116in Cord Hider Kit, Cord Covers for Wires on Wall, Cord Hider for Wall Mount tv, Paintable Cable Raceway, tv Cable Hider Wall kit, Wire Covers for Cords, W0.59in X H0.4in, White |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Raceways |
| Brand | YesBes |
| Manufacturer | YesBes |
| Model Number | B0D767N6RB |
| Color | 116in |
| Material | Plastic |
| Product Dimensions | 14.5"L x 0.59"W |
| Indoor Outdoor Usage | Indoor |
| Number of Pieces | 8 |
| Unit Count | 9.6667 Feet |
| Mfr Part Number | S-8p |
| Warranty Description | warranty_description |
| Enclosure Material | Plastic |
| Item Dimensions L x W | 14.5"L x 0.59"W |
| Installation Type | Self-Adhesive |
| Style Name | Modern |
| Style | Modern |
Available variants
Color
- 116in
- 315in
- 630in
Recommended next
No-Screw Under Desk Cable Management Tray - Self-Adhesive Installation, Cord Management, Cable Tray, Under Desk Wire Organizer - White Set of 2
A self-adhesive under-desk cable tray set designed to reduce visible cord clutter and keep power bricks and adapters organized. Buyers like the screwless installation and sturdy, solid feel, with the main tradeoff being that repositioning after the adhesive sets requires care and desk-surface prep matters.
Legrand – OnQ in-Wall Cable Management Kit for Power & Low Voltage Cords (HT2102WHV1)
The Legrand On-Q HT2102WHV1 is an in-wall retrofit kit that combines a recessed power outlet with a brush-plate pass-through for TV and display cables. It’s a strong fit for buyers who want a cleaner wall-mounted setup, but it is still a real electrical-in-wall project and requires careful planning for where cables exit.
A+ ELECTRIC Cord Cover Full Kit, 26ft/315in Self-Adhesive Cable Raceway, 20 Snap-On Channels, Wire Hider for TV, HDMI & Speaker Cables, Includes Connectors & Corners, Paintable Cable Management, White
The A+ ELECTRIC 315-inch self-adhesive cord cover kit is a long-run cable raceway built for tidy TV setups and other home entertainment wiring. Buyers like the snap-on channels, easy routing with multiple connector types, and the option to strengthen adhesion with included screws and anchors, with the main caveat being that very textured walls may need the screw-and-anchor approach.
ZhiYo Wall Cord Hider for 1-2 Cords, Self-Adhesive TV Cord review
The ZhiYo Wall Cord Hider is a low-profile, self-adhesive D-shaped cable raceway designed to neatly hide 1 to 2 thin cables along a wall-mounted TV setup. It’s easy to install with peel-and-stick mounting, includes three sections for flexible placement, and can be cut and painted for a custom look, but strong adhesive can leave wall marks when removed.