Yecaye 2 Pack Cable Management Under Desk, 31.5 in Under
Quick take
This adhesive-mounted under-desk cable management kit is designed to hide a power strip and keep desk cables from tangling or dangling. It is a good fit for anyone who wants a no-drill setup on a smooth underside, but the mounting adhesive is very tenacious, so you will want to be confident about placement before you stick it down.
Pros and cons
Pros
- No-drill installation with adhesive mounting.
- Roomy enough for organizing common desk power and accessory wiring (power strips, bricks, external drives, and cords).
- Comes with cable holders and ties, plus cutouts to route cords more easily.
- Designed for 31.5 inches of total tray length for broader desk coverage.
Cons
- Adhesive strength can make repositioning or removal difficult.
- Not recommended for textured walls or textured surfaces.
- Buyer experiences suggest holding can vary depending on how a power strip is supported, so placement and load distribution matter.
What buyers think
Buyer-review evidence centers on two major themes: the adhesive strength and the visual payoff. Multiple reviews describe the trays as sticking extremely firmly once installed, including reports that removal is difficult and can require damaging the tray or taking substantial time. Other buyers report that the setup helps keep cables off the floor and reduces clutter under the desk, especially when they follow careful placement before applying the adhesive. A smaller amount of feedback indicates that if the trays are used to hold heavier loads like a power strip, stability may depend on positioning and how the weight is supported.
Overall, buyer-review evidence is most consistent with “easy to mount, stays put,” with the main caveat being adhesive permanence and the need to consider how your specific cable and power-strip load will sit inside the tray.
How the Yecaye under-desk tray kit works
The kit uses two plastic under-desk raceways intended to clip into your desk’s underside organization, so cords and power accessories stay out of sight. Instead of screws, it relies on adhesive tape for mounting. The design includes cutouts along the sidewall and bottom, intended to make it easier to route cables while keeping them contained, reducing tangles when you move your desk setup.
Best for, and who should avoid it
Best for
- People who want to hide a power strip and loose cables under a desk without drilling.
- Home offices and gaming desks where under-desk clutter is creating visual mess or cable tangling.
- Setups that use multiple cable types, like charging cables, data cables, and power bricks, that benefit from separated routing.
Who should avoid it
- Anyone planning to frequently reposition the trays after sticking them down.
- Those mounting on textured surfaces, where adhesion may not perform as intended.
- Buyers expecting a simple solution for supporting heavier loads without carefully managing how the weight sits inside the channel.
Key features that affect real-world use
No-screw adhesive mounting (and why placement matters)
The trays mount with adhesive tape, with an instruction to wait before installing cables. Reviews commonly praise how firmly the trays hold once applied, which is a big advantage for everyday stability. The tradeoff is that you should treat placement as final, because repositioning can be hard and removal can be time-consuming.
Cable routing, cutouts, and included accessories
The kit includes cable holders and cable ties, and each tray is designed with multiple cutouts along the sidewall and bottom. This matters if you are trying to keep specific cables separated instead of stuffing everything into one bundle. It also helps when routing cables that need to pass through while staying contained within the raceway.
Size and coverage
The total tray length is listed as 31.5 inches. Each tray measures 15.7 inches long and is intended to cover a longer stretch under many desks. This can be useful if you want to hide wiring across more than a single monitor stand area.
Pros and cons recap
- Strong point: adhesive installation that stays put, making under-desk cable clutter less visible and less likely to spill onto the floor.
- Most important caveat: adhesive permanence, plan your location carefully and ensure your surface is suitable for tape mounting.
- Load consideration: if you plan to secure a power strip, pay attention to how it is supported inside the tray so it does not sag or shift.
Verdict
The Yecaye 2-pack under-desk cable management trays are a practical choice for smoothing out desk cable clutter when you have a smooth underside and want a no-drill setup. The upside is that the trays can hold aggressively and keep cords contained. The main reason to think twice is that the adhesive mounting is not designed for easy repositioning, and stability can depend on how a power strip and cable load are arranged.
Alternatives to consider (based on what you prioritize)
- If you need easy repositioning: look for cable raceways that use adjustable clips or screw mounting instead of permanent adhesive tape.
- If you have a textured underside: choose mounting systems explicitly designed for textured surfaces, or plan for a fastener-based installation.
- If you want maximum load support: consider raceways with stronger anchoring methods or designs intended to secure heavier power bricks reliably.
Price and availability
Check current pricing and availability before buying, since cable-management kits can vary by seller and bundle timing. You can view the latest price here:
FAQ
Will this work on a standing desk that moves up and down?
The trays are designed to keep cables contained and reduce tangling when your desk moves. However, like any under-desk solution, stability depends on your adhesive bond and how the cables and power strip sit inside the tray.
Can I remove or reposition it after installing?
Because the mounting is adhesive-based and is reported to hold extremely firmly, you should plan placement carefully. Reviews suggest removal can be difficult and may damage the tray or require significant effort.
What surfaces does it work best on?
It is intended for smooth surfaces. Textured surfaces are not recommended for adhesive performance.
What types of items can it hold?
It is intended for common desk power and accessory items such as power strips, surge protectors, power bricks, external hard drives, and loose cables, with help from the included cable holders and ties.
Is it good for organizing multiple cables?
Yes. The trays include side and bottom cutouts intended to let cords pass through while staying managed inside the raceway, and the included holders and ties help separate individual cables.
Specifications
| Product Title | Yecaye 2 Pack Cable Management Under Desk, 31.5 in Under Desk Cable Management Tray,Cord Hider,Cord Organizer, No Screw Wire Management for Office and Home, Black |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Raceways |
| Brand | Yecaye |
| Manufacturer | Yecaye Products, LLC |
| Model Number | under desk cable management U channel |
| Color | Black |
| Material | Plastic |
| Product Dimensions | 15.7"L x 3.9"W |
| Indoor Outdoor Usage | Indoor |
| Number of Pieces | 2 |
| Unit Count | 2 Count |
| Mfr Part Number | under desk cable management |
| Enclosure Material | Plastic |
| Item Dimensions L x W | 15.7"L x 3.9"W |
| Installation Type | Adhesive Mounted |
| Style Name | Modern |
| Style | Modern |
Available variants
Color
- Black
- White
Recommended next
D-Line Cable Management Box, Power Strip Holder, Floor Outlet Hiders, Desk Cord Organizer, Cover TV Wires, Wire Storage, Extension Hider, Office Concealer for Cords, Baby Proof Cables - Large, Black
The D-Line large cable management box is a freestanding ABS plastic enclosure designed to hide a power strip plus extra cord runs for cleaner TV stands, desks, and other media or office setups. Buyers like the tidy look and cord security, with the main caveat being that it only fits power strips sized appropriately to the box dimensions.
Yecaye Cord Hider, 113in One-Cord Cable Concealer, Cord Covers for Wires on Wall
The Yecaye Cord Hider is a self-adhesive wall cord cover kit designed to hide a single low-voltage cable (about 113 inches long) for a cleaner, more finished look in home offices and living spaces. Reviewers like the quick peel-and-press install and the tidy result, with the main caveats being up-front layout planning, best adhesion on smooth painted surfaces, and limited fit if you need lots of corners or transitions.
Legrand Wiremold Cable Management Kit, CordMate II, Cord Organizer and Hider, Cord Cover, Concealer, and Protector for Wall, Medium Capacity, CMK50
The Legrand Wiremold CMK50 CordMate II kit is a self-adhesive cord cover system designed to hide multiple low-voltage and AV cables along walls and around entertainment setups. Buyers like how clean the finished look is and how easy it is to cut and install, with the main tradeoff being adhesive removal risk (paint can lift) and the need to plan placement for level, secure bonding.
Delamu Cord Hider, 315in Total Cord Covers for Wires on Wall
The Delamu cord hider is a slim, paintable wall-mounted cable raceway designed to conceal a single cable run (or one thicker type within limits). It uses self-adhesive mounting with a snap-on cover, includes corner pieces and couplings, and is aimed at quick, tool-free cleanup for TVs and home offices. The main tradeoff is that tape adhesion and instructions matter, and it is not meant for two Cat-5/Cat-6 network cables at the same time or for very large wires.