Delamu Cord Hider, 315in Total Cord Covers for Wires on Wall
Quick take
The Delamu cord hider is a slim, paintable wall cable raceway that snaps shut over a single cable run, making it a practical choice for hiding TV, speaker, Ethernet, and similar low-voltage wires. Buyers like how discreet it looks and how straightforward it is to cut to length and assemble, but the adhesive tape and the route planning are frequent sticking points. It is also important to match the kit to your cable type and thickness, since it is intended for one cord (with specific limitations for certain cable combinations).
Pros and cons
Pros
- Designed for one-cord hiding (includes guidance not to cover certain multi-cable setups).
- Slim profile that blends in, with an off-white finish that can be painted.
- Tool-free, snap-on installation with included couplings and corner pieces.
- Cut-to-size with regular scissors, which helps for custom runs.
- UL94 V-0 flammability rating (a safety-focused spec).
Cons
- Self-adhesive tape is described as very tenacious, so planning placement matters.
- Instructions can feel light, and getting the spacing for couplers right may take a quick learning curve.
- Not suitable for textured walls (tape may not adhere well).
- Size limits: it is not meant for very large wires, and some thicker cable types may not fit.
What buyers think
Buyer-review evidence centers on a few repeatable themes. People generally report that the cord hider helps the space look cleaner and more “finished,” especially for TV or home office wiring, and that the cover is easy to slide on once the base is mounted. Many also mention that the pieces cut cleanly enough for custom layouts and that the overall profile is unobtrusive.
On the downside, reviews commonly highlight installation details rather than product failure. The included double-sided mounting tape can be difficult to work with if you need to reposition, and some buyers find the documentation minimal or the layout spacing between sections confusing at first. Corner routing can also be a bit fiddly, with occasional notes about pieces tearing when installed incorrectly, which suggests careful alignment during install is important.
Who this cord hider is for
- Homeowners mounting a TV or organizing a desk setup who want a low-visibility path for power-adjacent low-voltage or similar cables.
- People comfortable doing light customization, since the raceway can be cut to length and painted to match the wall.
- Buyers with smooth walls who want a simple self-adhesive install (the kit is not intended for textured surfaces).
- Anyone hiding one cable run, such as speaker wire or a single network cable path, where the fit and dimensions matter more than hiding multiple cables.
Key features that affect day-to-day use
One-cord design with fit limitations
This kit is intended for concealing a single cable run, and it includes guidance that certain multi-cable arrangements are not supported (for example, it should not be used to conceal two Cat-5/Cat-6 network cables simultaneously). The internal opening is sized for relatively slim cabling, so if your wire is unusually thick or stiff, you may need to verify fit before committing.
Paintable finish and cut-to-size routing
The smooth surface is meant to accept paint, which helps it disappear visually when matched to walls, baseboards, or trim. Buyers frequently mention that trimming is manageable, which is useful for shorter sections or angled layouts where standard lengths do not line up cleanly.
Snap-on cover, plus couplings and corners
Installation is designed to be quick: mount the base using the included adhesive tape, run the cable inside, then snap the cover into place. The bundle includes multiple couplings and corner pieces, which helps with typical routing around room transitions (for example, changing direction between wall and floor lines).
Safety-related spec: UL94 V-0
The PVC material is rated to meet UL94 V-0 flammability testing criteria. This is a meaningful spec for buyers who want a cord management solution that prioritizes fire-retardant behavior.
Pros and cons
Pros
- Discreet look once installed: Slim and off-white, with the option to paint.
- Quick installation approach: Snap-on cover design and self-adhesive mounting reduce setup time.
- Works for common cable types: Suitable for low-voltage and similar one-cord scenarios (speaker wire, Ethernet runs, and other slim cables).
- Includes routing parts: Couplings and corner pieces help you complete more than just straight lines.
Cons
- Tape demands careful planning: Reviews point to strong adhesion, so positioning mistakes can be costly.
- Learning curve around sections and corners: Some buyers find instructions minimal and corner installs easier to get wrong than straight runs.
- Not for textured walls: If your wall has texture, the adhesive mounting may not perform as intended.
- Limited to one cable and certain dimensions: Thicker cables or unsupported multi-cable setups may not fit.
Installation tips that can prevent common headaches
- Dry-fit the route first before pressing tape into place, especially if you need to measure around outlet positions, TV mounts, or bends.
- Use patience on spacing between sections, since couplings create a specific alignment that can affect how the cover snaps down.
- Expect corners to take extra care compared with straight runs. Take your time aligning the pieces before locking them down.
- Confirm wall surface type before buying, since the kit is not meant for textured walls.
Alternatives to consider (based on different needs)
- If you need to hide multiple cables side-by-side: look for wider or multi-channel raceway systems, because this kit is built for a single-cord channel.
- If you have textured walls: consider cable raceways that use mounting hardware or designs specifically made for uneven surfaces, rather than relying only on adhesive tape.
- If your priority is maximum wire capacity: choose a raceway with a larger internal opening, since fit limitations are part of why this one works best for slim cables.
Verdict
The Delamu cord hider is a solid, practical choice for buyers who want a clean, paintable way to manage one cable run along a smooth wall. It is especially well-suited for TV and home office cable cleanup where appearance matters. Just be sure your cable fits the channel, your wall surface is compatible with tape mounting, and you are ready to take your time with placement and corners.
FAQs
How many cables can the Delamu cord hider fit?
It is designed for one-cord hiding. There are also limitations on certain cable combinations, including guidance not to conceal two Cat-5/Cat-6 network cables simultaneously.
Can I paint the cable raceway to match my walls?
Yes. The surface is intended to be paintable, so you can match it to walls, baseboards, or furniture.
Does it work on textured walls?
No. The mounting tape is not suitable for textured walls, so it works best on smoother surfaces.
Is installation tool-free?
The mounting approach is designed to be quick and tool-free, using self-adhesive tape and a snap-on cover. You may still need to cut the pieces to length.
What is the internal size limit?
The internal opening is sized for a single, relatively slim cable run. If your wire is thick or large, confirm it will fit the channel before installing.
Is it safe to use indoors?
The kit includes a UL94 V-0 flammability rating spec for the plastics material, which is intended to indicate higher flame retardancy versus ordinary materials.
Want to check the latest options and price? Buy on Amazon
Specifications
| Product Title | Delamu Cord Hider, 315in Total Cord Covers for Wires on Wall, Paintable Cable Cover for Wall Mounted TV, Easy Install Cable Raceways to Hide 1-2 Cords, 20 Pack, Each 15.7"L x 0.59"W x 0.40"H, White |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Raceways |
| Brand | Delamu |
| Manufacturer | Delamu |
| Model Number | CC03-9 |
| Color | White |
| Material | Polyvinyl Chloride |
| Item Weight | 100 Grams |
| Product Dimensions | 15.7"L x 0.59"W |
| Number of Pieces | 1 |
| UPC | 746125029549 |
| Unit Count | 26.2 Feet |
| Mfr Part Number | CC03-9 |
| Warranty Description | No |
| Enclosure Material | Polyvinyl Chloride |
| Item Dimensions L x W | 15.7"L x 0.59"W |
| Installation Type | Self-Adhesive |
| Style Name | Cord Hider |
| Style | Cord Hider |
Available variants
Color
- White
Size
- 315in x 1.18in x 0.67in
- 315in x 0.95in x 0.55in
- 471in L X 0.95in W X 0.55in H
- 315in x 0.59in x 0.40in
- 471in L X 1.18in W X 0.60in H
- 471in L X 0.59in W X 0.40in H
Recommended next
Delamu Cord Hider, 157in Wire Covers for Cords on Wall
The Delamu Cord Hider (157-inch wall-mounted cable raceway) is designed to conceal 2 to 3 cords in a clean, paintable channel. It installs with an attach-and-snap design and can use adhesive tape or screws, but the adhesive tape is strong enough to risk paint damage if you remove it later.
No-Screw Under Desk Cable Management Tray - Self-Adhesive Installation, Cord Management, Cable Tray, Under Desk Wire Organizer - White Set of 2
A self-adhesive under-desk cable tray set designed to reduce visible cord clutter and keep power bricks and adapters organized. Buyers like the screwless installation and sturdy, solid feel, with the main tradeoff being that repositioning after the adhesive sets requires care and desk-surface prep matters.
Delamu 128in Cord Hider for 1 Cord, Self-Adhesive Cord Covers
The Delamu one-cord wall cord hider is a slim, paintable cable raceway designed to conceal a single ultra-thin power or low-voltage cord along baseboards, walls, or TV setups. It uses self-adhesive mounting for tool-free installation, but it is only meant for one mini-sized cable and will not fit thicker cables like standard Ethernet.
ZhiYo Wire Covers for 2 Cords, Wire Hider on Wall Mounted (White Cord Cover Kit)
ZhiYo wire covers are a simple peel-and-stick PVC cable raceway kit made to hide one power cable plus an Ethernet cable, or two Ethernet cables, along wall runs. Buyers like how quickly it installs and how clean the finished look looks, with the main caveat being that the adhesive is very strong and removal can damage paint.