Windshield Suction Cup Bracket Cradle Complete Mount – Compatible Replacement for Garmin DriveSmart 50 51 61 65 70 76, Drive 51 55 60 61, nüvi 42 52 57 2539 2597 2689, RV 660 770, dēzl 570 580 OTR700
Quick take
This suction-cup vehicle mount bundle is built as a replacement for select Garmin GPS models in the Drive, DriveSmart, nüvi, RV, DriveTrack, and dēzl lines. It uses a windshield mounting approach with an adjustable cradle, and buyers report the suction cup stays put once installed. The main caveat is that the mounting disk is required but not included, and the ball joint feel can be a little looser than some originals.
Pros and cons
Pros
- Strong suction performance reported by buyers, with the mount not coming off while driving.
- Works as a replacement fit for a wide list of Garmin Drive, DriveSmart, nüvi, RV, DriveTrack, and dēzl models.
- Adjustable cradle design to aim the screen where you need it.
- Easy daily remove and reattach routine for sun management.
Cons
- Mounting disk is required for windshield attachment, but it is not included.
- Ball joint friction can feel less firm for some users, which may slightly affect how much the screen settles on bumps.
- Compatibility is model-specific, including an explicit note that it is not compatible with Garmin DriveSmart 86.
What buyers think
Buyer-review evidence focuses mainly on fitment, everyday holding power, and adjustability. Many comments highlight that the suction cup stays attached to the windshield and that removing and reattaching the unit is straightforward. Several buyers describe a generally solid replacement fit for their Garmin, and a common theme is that the mount’s adjustment works well enough for typical driving. Where feedback is mixed, it tends to be about ball joint firmness, with some noting the cradle can tilt down a bit more on larger bumps or that the joint has less resistance than expected. Overall, review patterns suggest this is a practical replacement when compatibility matches your Garmin model.
Who this windshield suction mount is for
This mount is a good match if you want a windshield-based replacement cradle for a compatible Garmin GPS from the Drive, DriveSmart, nüvi, RV, DriveTrack, or dēzl families. It is also a strong fit for people who frequently remove the GPS to reduce sun exposure, since multiple buyers describe quick reattachment routines.
Who should skip it
Avoid this mount if your Garmin model is not on the supported list, especially if you have a Garmin DriveSmart 86 (explicitly called out as not compatible). Also consider another option if you do not already have the correct mounting disk for suction installation, since it is required and not included.
Key features that affect real-world use
Windshield mounting with a suction cup
The mount is designed for windshield attachment, using suction for grip. Buyers consistently mention that it holds securely once mounted.
Replacement-style compatibility across multiple Garmin lines
Compatibility covers many specific Garmin models across Drive, DriveSmart, nüvi, RV, DriveTrack, and dēzl categories. Before you buy, double-check your exact GPS model name or number to ensure a match.
Adjustable cradle behavior
The cradle is adjustable, letting you change the viewing angle. That helps reduce glare and improves visibility, but feedback indicates the ball joint may have less friction than some original setups, so the screen may be easier to move or settle with road vibrations.
Pros and cons in plain language
Pros
- Reliable suction holding power for windshield mounting.
- Fits many compatible Garmin GPS units as a replacement cradle.
- Adjustable screen angle for better viewing.
- Designed for easy removal and reattachment for sun protection.
Cons
- You need a mounting disk to install on the windshield, it is not included.
- Ball joint tightness can be looser than some owners expect, especially on bumps.
- Model compatibility is strict, so confirm your Garmin version first.
Price and availability
This mount is positioned as a budget-friendly replacement option, with the goal of giving your Garmin back a functional windshield setup. For the latest pricing and availability, check the live listing before purchasing.
FAQ
Is the mounting disk included with this suction cup mount?
No. The windshield setup requires a mounting disk, and it is not included with the mount bundle.
What Garmin models are compatible?
It is intended as a compatible replacement for select Garmin Drive, DriveSmart, nüvi, RV, DriveTrack, and dēzl models listed by model name/series. Check your exact GPS model number to confirm compatibility.
Is this mount compatible with Garmin DriveSmart 86?
No. Garmin DriveSmart 86 is explicitly listed as not compatible.
Will it hold on the windshield in hot or cold weather?
Review evidence is limited but includes buyers reporting it has held securely over time in a range of temperatures. Real results can vary based on windshield material, installation technique, and climate exposure.
Does the screen stay in place on bumps?
Some buyers report the mount can tilt downward on bigger bumps, and others note the ball joint friction is not as firm as the original. If you drive on rough roads, it is worth paying attention to that adjustment behavior.
Can I remove the GPS and reattach it daily?
Yes. Several buyers describe removing the unit and reattaching it to the windshield with ease for sun protection.
Verdict
If you have a compatible Garmin GPS and need a replacement windshield suction cradle, this mount is a practical, budget-style option. The standout benefit from buyer feedback is how securely the suction holds, plus the convenience of reattaching it routinely. Just be careful about the two biggest gotchas: the required mounting disk is not included, and the ball joint may feel less resistant than some original mounts, which can matter if your roads are bumpy.
Specifications
| Product Title | Windshield Suction Cup Bracket Cradle Complete Mount – Compatible Replacement for Garmin DriveSmart 50 51 61 65 70 76, Drive 51 55 60 61, nüvi 42 52 57 2539 2597 2689, RV 660 770, dēzl 570 580 OTR700 |
|---|---|
| Category | Electronics > GPS, Finders & Accessories > GPS System Accessories > Vehicle Mounts |
| Brand | Partx |
| Manufacturer | Partx |
| Model Name | 5 |
| Model Number | 5 |
| Color | Black |
| Item Weight | 0.04 Kilograms |
| Compatible Devices | Drive Series: 5, 5LM, 5EX, 40LM, 50, 50LM, 50LMT, 51, 51LM, 51LMT-S, 51LMT-D, 52, 52MT-S, 53, 55, 55MT, 55MT-S, 6, 6LM, 60LM, 60LMT, 60LMT-S, 61, 61EX, 61LM, 61LMT-S, DriveSmart Series: 50, 50LMT, 50LMTHD, 51, 51LMT-S, 51LMT-D, 55, 55MT, 55EX, 60, 60LMT, 60LMTHD, 61, 61LMT-S, 65, 65MT, 66, 66EX, 70, 70LMT, 71, 71EX, 76, 76EX, Garmin RV Series: RV 660 LMT, RV 701 Navigator and Remote, RV 770 LMT-S, RV 780 & Traffic, RV 795, dēzl Series: dēzl 570, dēzl 580, dēzl OTR500, dēzl OTR700, dēzl OTR610, dēzl OTR710, nüvi Series: 2407, 2408, 2447, 2457, 2457LMT, 2467, 2497, 2497LMT, 2507, 2508, 2539LMT, 2547, 2548, 2557, 2557LMT, 2558LMTHD, 2559LMT, 2567, 2577, 2577LT, 2589LMT, 2597LMT, 2598LMTHD, 2599LMTHD, 2639LMT, 2689LMT, 2699LMTHD, 42, 42LM, 44, 44LM, 52, 52LM, 54, 54LM, 55, 55LM, 55LMT, 56, 56LM, 56LMT, 57, 57LM, 57LMT, 58, 58LM, 58LMT, 65, 65LM, 65LMT, 66, 66LM, 66LMT, 67LM, 67LMT, 68LM, 68LMT |
| Compatible Phone Models | Compatible with Select Garmin GPS Models: Drive, DriveSmart, nüvi, RV, DriveTrack, and dēzl Series (including select OTR models) |
| Mounting Type | Windshield |
| Additional Features | Adjustable |
| Water Resistance Level | Not Water Resistant |
| Compatible with Vehicle Type | Automobile |
| Shape | Round |
| UPC | 685674953526 |
| Built-In Media | 1 x Complete Mount |
| Enclosure Material | Plastic |
Recommended next
Garmin 010-10908-02 Portable Friction Mount
The Garmin 010-10908-02 is a portable dash friction mount designed to hold compatible Garmin nüvi and StreetPilot devices securely on stable surfaces. It focuses on quick in-and-out mounting, adjustable viewing angles, and a grip-on-dash approach that avoids common windshield suction issues.
![1Zero GPS Dash Mount [Matte Black Dock] for Garmin Nuvi Drive Dezl Drivesmart, Tomtom, Magellan Roadmate, Rand McNally, Navman, Cell Phone](/product-images/019ed146-ab8d-7866-8502-eba43b68e56d-0-26ad7384baba.webp)
1Zero GPS Dash Mount [Matte Black Dock] for Garmin Nuvi Drive Dezl Drivesmart, Tomtom, Magellan Roadmate, Rand McNally, Navman, Cell Phone
The 1Zero matte-black clamshell dash mount uses a spring-locked clamp plus non-slip 3M adhesive to hold compatible GPS units or phones securely on the dashboard. It is a strong option if you prefer not to use a windshield mount, but you should confirm fit, especially if your device has a camera or is a foldable phone.
RAM MOUNTS B Size 1" Double Socket Mount Arm – Medium Composite (RAP-B-201U)
The RAM-B-201U is a medium-length RAM double-socket arm for B size (1-inch) ball-and-socket systems. It gives you flexible positioning with “near-infinite” angle adjustment and quick pivot setup using a spring inside the arm. Best for riders and vehicle setups that need a compact arm length and strong, marine-grade composite construction, with the main caveat that you must build the rest of your mount with compatible B size components.
APPS2Car GPS Car Truck Mount, Non-Slip GPS Bean Bag Dash review
The APPS2Car non-slip bean bag dash mount is a friction-style GPS and phone holder designed to work without windshield suction cups. It uses a weighted, anti-skid base plus a spring clamp for 3–6 inch GPS units and many smartphones, with angle adjustment for better sight lines. Best fit if you want a removable dash mount for trucks or cars where windshield mounting is inconvenient, but it needs a flat, smooth dashboard to grip reliably.