APPS2Car GPS Car Truck Mount, Non-Slip GPS Bean Bag Dash Mount
Quick take
The APPS2Car bean bag dash mount is a weighted, non-slip alternative to windshield suction mounts. It clamps onto most 3–6 inch GPS devices and many smartphones, and you can reposition the screen angle using multiple slots. The main catch is grip quality depends on having a flat, smooth, clean dashboard surface.
Pros and cons
Pros
- Non-slip, friction-style base designed to stay put while driving
- Spring lock clamp fits a wide 3–6 inch range of GPS units and holds many phones
- Adjustable multi-angle positioning (helpful for different dash setups)
- No windshield suction needed, so it can be a better fit for cars or trucks where that’s inconvenient
Cons
- May not grip well on sloped, curved, textured, or uneven dashboards
- Not for tablets, iPads, foldable phones, or portable CarPlay units
- Some buyers report needing extra help if the dash surface doesn’t bond well initially
What buyers think
Buyer feedback centers on stability and usability. Many reviewers describe the mount as staying secure on the dash, with the base resisting sliding during normal driving. People also tend to like the positioning flexibility, especially when they are trying to keep the screen in a comfortable viewing area without relying on windshield suction. There is also consistent praise for broad compatibility across different GPS models and for holding phones firmly. At the same time, a smaller subset of buyers report that initial traction depends heavily on the dashboard surface, and they improved results with additional anti-slip methods after first use. Overall, buyer-review evidence supports that this works best when your dash is flat, smooth, and properly prepped.
What this mount is designed to do
This is a friction dash mount built around two ideas: a weighted, anti-skid base that sits on your dashboard and a spring lock clamp that grips the device. The setup is meant to be tool-free and removable, so you can take your GPS or phone off when you need to. Since it does not require suction cups, it is often considered for drivers who prefer a dashboard location (or who have vehicles where windshield mounting is awkward).
Fit and compatibility: what it supports
Device sizes. The clamp targets most 3–6 inch GPS units and works with many smartphones. If you are choosing based on screen size range, this mount is meant to cover the common mid-size navigation and phone categories.
Mounting location. It is intended for dashboard use, particularly when windshield mounting is not desired or permitted. It is also positioned as a way to avoid suction-cup failures that can happen in heat.
Compatibility limits. It is not intended for tablets, iPads, foldable phones, or portable CarPlay units. There is also mention that it will not be compatible with certain folded-phone models (such as Samsung Galaxy Z Fold/Flip series). If you have a larger, thicker case setup or an unusual device form factor, it’s worth double-checking that your device falls within the expected size range.
How the non-slip base works (and why surface matters)
The base uses a sandbag-style weight (1.55 lb listed weight) plus an anti-slip bottom. To get maximum grip, the mount includes a film you should remove before use. Even with the weight, the design still relies on friction and contact, so dashboard characteristics matter.
For best results: use it on flat, smooth, and clean surfaces. If your dashboard is sloped, curved, textured, or uneven, the mount may not sit as firmly, and you could need additional anti-slip measures.
Clamping and positioning: making the screen easy to read
The spring lock clamp holds the device, and the mount provides multiple slots for adjusting angles. That flexibility can be helpful if your seating position, steering wheel height, or dash layout requires the screen to sit higher, lower, or tilted toward you. Several buyers mention using it successfully for different GPS sizes and for phone mounting, which suggests the adjustability is practical rather than purely theoretical.
Pros and cons recap
Good choice if you want
- A dashboard GPS/phone mount that does not depend on windshield suction cups
- An adjustable viewing angle for safer, more comfortable screen positioning
- Support for a broad 3–6 inch GPS range and many smartphones
Consider alternatives if
- Your dashboard is curved, textured, or otherwise not flat (grip is less predictable)
- You need to mount a tablet, iPad, or a foldable phone
- You prefer a mount that you never have to re-seat or fine-tune after installation
Verdict
The APPS2Car bean bag dash mount is a solid option for drivers who want a removable, non-windshield GPS and phone solution. It is especially appealing for vehicles where suction mounts feel unreliable or inconvenient. If your dashboard is flat and smooth, the weighted anti-slip base and spring clamp design are a straightforward way to keep your device in view. If your dash is highly curved or textured, plan for the possibility of extra prep or add-on anti-slip help to get the stability you want.
Price and availability
Pricing can change over time. Check the current listing for the latest price and shipping details.
FAQ
Is this mount compatible with all GPS and phone sizes?
It is intended for most 3–6 inch GPS units and many smartphones. It is not meant for tablets, iPads, foldable phones, or portable CarPlay units, and there are specific compatibility limits for certain foldable models.
Does it work on a textured or curved dashboard?
The mount is designed to perform best on flat, smooth, and clean surfaces. If your dashboard is sloped, curved, textured, or uneven, grip may be less reliable.
Will it slide around while driving?
Many buyers report the base stays put and does not slide under normal driving. However, results depend on dashboard surface contact, so proper cleaning and installing it on a compatible dash surface matter.
Can I adjust the viewing angle?
Yes. The mount uses multiple slots so you can set the device angle for better visibility.
Do I need tools to mount it?
No tools are required. You attach the device to the dash using the mount’s friction and clamp design.
Specifications
| Product Title | APPS2Car GPS Car Truck Mount, Non-Slip GPS Bean Bag Dash Mount 2-in-1 Anti-Skid Friction Dashboard Sandbag Clamshell Phone Holder for Garmin Nuvi Tomtom Magellan Navigation & All Cell Phone iPhone |
|---|---|
| Category | Electronics > GPS, Finders & Accessories > GPS System Accessories > Vehicle Mounts |
| Brand | APPS2Car |
| Manufacturer | APPS2Car |
| Model Name | FBA_GPS01 |
| Model Number | FBA_GPS01 |
| Color | Black |
| Item Weight | 1.55 Pounds |
| Compatible Devices | 3–6 inch GPS, Smartphones |
| Compatible Phone Models | 99% Phones, except Samsung Galaxy Z Fold/ Flip series. Such as iPhone 17/16/15/14/13/12/11series; Samsung Galaxy S24/S23/S22 series; Google Pixel 9/8/7 series, and more. |
| Mounting Type | Dashboard |
| Additional Features | Adjustable, Portable, Removable |
| Weight Capacity Maximum | 703 Grams |
| Water Resistance Level | Water Resistant |
| Compatible with Vehicle Type | Car,Truck |
| Item Dimensions | 7.58 x 5.51 x 1.96 inches |
| Unit Count | 1.0 Count |
| Enclosure Material | Plastic |
| Mfr Part Number | FBA_GPS01 |
| Shape | Rectangular |
Recommended next
Garmin 010-10908-02 Portable Friction Mount
The Garmin 010-10908-02 is a portable dash friction mount designed to hold compatible Garmin nüvi and StreetPilot devices securely on stable surfaces. It focuses on quick in-and-out mounting, adjustable viewing angles, and a grip-on-dash approach that avoids common windshield suction issues.
Miracase Phone Holders for Your Car with Metal Hook Clip, Air Vent Cell Phone Stand Car Mount, Dark Black
The Miracase air-vent phone mount uses a metal hook and clamp arms to hold phones securely while you drive. It’s designed for most phones from 4.0 to 7.2 inches (including thicker cases) and supports 360-degree rotation for portrait or landscape viewing. The main caveat is compatibility: it fits horizontal and vertical air vents (not round vents), and the vent blade width needs to be under about 1.4 inches.
RAM MOUNTS Swivel Double Socket Arm, B Size 1" Ball review
The RAM MOUNTS RAP-B-200-2U is a B-size double socket swivel arm designed to expand adjustability in a RAM ball-and-socket vehicle mount system. It offers 360° center rotation and a 180° swivel joint for positioning phones, GPS units, and cameras, with a typical usable load up to 2 lb (standard use). The main tradeoff is that it is a composite arm, and longer configurations can add noticeable device vibration depending on your setup.
![1Zero GPS Dash Mount [Matte Black Dock] for Garmin Nuvi Drive Dezl Drivesmart, Tomtom, Magellan Roadmate, Rand McNally, Navman, Cell Phone](/product-images/019ed146-ab8d-7866-8502-eba43b68e56d-0-26ad7384baba.webp)
1Zero GPS Dash Mount [Matte Black Dock] for Garmin Nuvi Drive Dezl Drivesmart, Tomtom, Magellan Roadmate, Rand McNally, Navman, Cell Phone
The 1Zero matte-black clamshell dash mount uses a spring-locked clamp plus non-slip 3M adhesive to hold compatible GPS units or phones securely on the dashboard. It is a strong option if you prefer not to use a windshield mount, but you should confirm fit, especially if your device has a camera or is a foldable phone.