Bulletpoint 2.6" Aluminum Mounting Arm Dual 20mm Socket Connector Ends
Quick take
This 2.6-inch aluminum mounting arm is designed to connect dual 20mm ball mount systems, helping you keep a phone, GPS, or radio closer to the dashboard with a low-profile look. It uses a thumbscrew for quick attachment and adjustment, which suits buyers who want a stable, neatly positioned setup. The main caveat is compatibility: it only makes sense if your existing mount holders use a 20mm ball system (and you want a short arm length).
Pros and cons
Pros
- Dual 20mm socket connector ends for compatibility with 20mm ball mount systems
- Low-profile 2.6-inch arm length, helping reduce clutter and keep devices closer to the surface
- Thumbscrew-based installation and adjustability for faster positioning
- Aluminum construction aimed at durable, sturdy support
Cons
- Not a universal mount, it depends on having a 20mm ball mounting ecosystem
- Short arm length may not work for drivers who need more reach to their preferred viewing angle
What buyers think
Buyer-review evidence is strongly positive but focused on a small set of themes. Multiple comments highlight that the arm stays stable and secure during real-world driving conditions, including bumps and rough movement. Install and adjustment are also frequently praised, especially the ease of getting the holder centered and positioned where you want it. There are also mentions that the short length fits the intended use case for a cleaner look, and that the overall build feels durable. Some buyer feedback emphasizes using the arm in more demanding environments (for example, heavy equipment), which supports the idea that this is built for firmness rather than a flimsy, temporary setup. Overall, review evidence points to stability, adjustability, and good fit for users already committed to the Bulletpoint-style 20mm ball system.
What this mounting arm does well
The Bulletpoint 2.6" Aluminum Mounting Arm is essentially a connector and positioning arm. By using dual 20mm socket ends, it lets you attach between a compatible 20mm ball mount on your dash or base and your device holder that also uses the 20mm ball standard. The result is a more controlled placement of your device, without forcing a tall, bulky profile.
Low-profile placement for cleaner dash setups
At 2.6 inches long, this is meant to keep your phone, GPS, or handheld radio positioned close to the mounting surface. If you dislike a high, obstructive arm that lifts your screen too far, a shorter connector like this can help you aim for a flatter, more discreet layout. It is also a good option when you want your setup to look more intentional and less cluttered.
Installation and adjustment: thumbscrew convenience
Instead of complex hardware, this arm uses an integrated thumbscrew for quick installation and adjustment. That matters for real-world use because you might want to fine-tune the viewing angle occasionally, especially if multiple people use the same vehicle or if you shift where your device sits between commutes.
Durability and build quality
The arm is made from aluminum and is intended to deliver sturdy support over time. Reviews commonly describe it as durable and very sturdy, including use cases where the mount and device holder need to remain stable over bumps and potholes. While no mounting solution can eliminate movement entirely in all situations, the design intent here is clear: rigid enough to keep your holder from feeling loose or wobbly.
Who should buy it, and who should skip it
Buy it if you want a short, discreet connector in a 20mm ball system
- You already own a Bulletpoint or 20mm ball-compatible dash mount or device holder
- You prefer keeping your phone or GPS lower and closer to the mounting surface
- You want quick install and easy angle adjustments using a thumbscrew
Skip it if you need a different mounting standard or more reach
- Your existing mount uses a different ball size or connector type than 20mm
- You need a longer arm to achieve your preferred viewing position
Price and availability
This accessory is positioned as an affordable mounting component, and pricing can change based on retailer and promotions. If you are planning to add it to an existing 20mm mounting setup, it can be a cost-effective way to refine placement without replacing your whole mount system.
Verdict
The Bulletpoint 2.6" Aluminum Mounting Arm is a strong choice if you are already using a 20mm ball mount ecosystem and want a shorter, low-profile connection that helps keep your device stable and well-positioned. It is less ideal if you need a longer reach or if your current setup does not match the 20mm ball standard.
FAQ
Is the Bulletpoint 2.6" mounting arm compatible with 20mm ball mounts?
Yes. It is built with dual 20mm socket connector ends intended to connect with 20mm ball mounting systems.
How long is this arm?
The arm measures 2.6 inches overall, which is meant for a low-profile placement.
Is it easy to adjust once installed?
It uses an integrated thumbscrew, designed for quick installation and adjustment so you can position your holder where you want it.
What devices can you mount with this arm?
It is meant for mounting device holders in the Bulletpoint-style system, commonly used with smartphones, GPS devices, and other compatible holders that use the 20mm ball standard.
Does it feel sturdy on rough roads?
Buyer feedback repeatedly mentions stable, secure performance over bumps and rough movement, which suggests it is intended to hold position firmly during driving.
Specifications
| Product Title | Bulletpoint 2.6" Aluminum Mounting Arm Dual 20mm Socket Connector Ends Compatible with 20mm Ball Mounts |
|---|---|
| Category | Electronics > GPS, Finders & Accessories > GPS System Accessories > Vehicle Mounts |
| Brand | Bulletpoint |
| Manufacturer | Bulletpoint Mounting Solutions |
| Model Name | 2.6" Aluminum Mounting Arm |
| Model Number | 2.6" Aluminum Mounting Arm |
| Color | Black |
| Item Weight | 0.06 Kilograms |
| Compatible Devices | Smartphones |
| Compatible Phone Models | Universal |
| Mounting Type | Dashboard |
| Additional Features | Adjustable, Hand Free, Lightweight, Rotatable |
| Compatible with Vehicle Type | various |
| Arm Length | 2.6 Inches |
| Global Trade Identification Number | 05061008041520 |
| Enclosure Material | Aluminum |
Recommended next
Garmin 010-10908-02 Portable Friction Mount
The Garmin 010-10908-02 is a portable dash friction mount designed to hold compatible Garmin nüvi and StreetPilot devices securely on stable surfaces. It focuses on quick in-and-out mounting, adjustable viewing angles, and a grip-on-dash approach that avoids common windshield suction issues.
Miracase Phone Holders for Your Car with Metal Hook Clip, Air Vent Cell Phone Stand Car Mount, Dark Black
The Miracase air-vent phone mount uses a metal hook and clamp arms to hold phones securely while you drive. It’s designed for most phones from 4.0 to 7.2 inches (including thicker cases) and supports 360-degree rotation for portrait or landscape viewing. The main caveat is compatibility: it fits horizontal and vertical air vents (not round vents), and the vent blade width needs to be under about 1.4 inches.
![1Zero GPS Suction Cup Mount for Garmin [Quick Extension Arm]](/product-images/019ed146-f5f5-7de5-ad16-6b0f3bccdcc1-0-103950937647.webp)
1Zero GPS Suction Cup Mount for Garmin [Quick Extension Arm]
The 1Zero GPS suction cup mount with a quick-extension arm is designed to replace a Garmin dashboard or windshield ball-style mount using a 17 mm swivel ball pattern. It focuses on one-hand length adjustment, a 240-degree pivot, and a gel-based adhesive suction for steadier positioning, with the main catch being compatibility limits (it is not for several specific Garmin models) and the fact that it’s mount-only (no cradle or socket parts).
Elevation Lab AirTag Strap Mount
The Elevation Lab AirTag Strap Mount is a low-profile, matte-black way to attach an AirTag to straps like backpacks, camera straps, and gym bags. It’s designed to sit flush (no dangling), use thru-strap self-piercing screws (driver included), and handle outdoor use with a waterproof build. The main tradeoff is that the mount is thicker and more “permanent” than softer strap wraps.