Scosche UDEB Universal Under Dash or Top Mount Single DIN Radio Installation Enclosure
Quick take
The Scosche UDEB is a universal single DIN mounting enclosure that helps you install an aftermarket car stereo on a flat surface, either under the dash or on top, for a more finished look. It’s intended for radios with a standard single DIN cutout (50mm x 180mm) and a specific enclosure footprint, so measuring is key. It does not fit double DIN head units.
Pros and cons
Pros
- Made to hold standard single DIN radios, using a DIN cutout of 50mm x 180mm.
- Universal under-dash or top-mount approach, useful for custom installs where you do not want to cut the dash.
- Rugged hard-plastic enclosure design with mounting options and cable-routing access (including tabs for wire and RCA routing).
- Buyer feedback frequently highlights easy fit and secure mounting with the included hardware.
Cons
- Does not work with double DIN radios, so it’s only for single DIN chassis head units.
- Compatibility depends on the flat-surface fit area, listed as 11” wide by 9” deep, plus the enclosure dimensions.
- Mounting screws are not included, so you may need to source hardware for your specific mounting surface.
- Some buyers note it can look larger than expected in certain installations.
What buyers think
Buyer-review evidence is limited in volume here, but the recurring themes are clear. People use the UDEB to mount a single DIN radio in customized locations, often mentioning it fits well and holds the head unit securely. Several comments also note practical install features, like cable-routing space and an easy head unit slide-in. A smaller number of buyers mention that the enclosure may require trimming or that it can appear larger than expected depending on the setup, which reinforces the importance of checking the enclosure dimensions before committing.
What it is and how it helps your install
The Scosche UDEB is an aftermarket installation enclosure designed to give your single DIN head unit a stable mounting point on a flat surface. Instead of permanently altering the factory dash (or improvising with temporary brackets), the enclosure creates a dedicated housing for the radio, aiming for a cleaner, more “installed” look.
Under-dash and top-mount flexibility
This kit is made for either under-dash mounting or top-mount mounting, which is especially useful when you are building an install around space you already have. It is a good fit for projects where you want mounting flexibility but still want a more finished appearance than using a cage alone.
Fitment and compatibility checklist
Before buying, verify the measurements against your radio and your mounting surface. This enclosure is designed around:
- Single DIN cutout: 50mm x 180mm (you should confirm your head unit chassis cutout requirements).
- Flat surface fit area: 11” wide by 9” deep (the enclosure is intended for that size of mounting area).
- Radio type: it does not fit double DIN radios.
If you have a larger “floating” style single DIN head unit, it may work, but you still need to confirm cutout requirements and fit with your specific model.
Pros, cons, and who it’s best for
Best for
- Single DIN head unit upgrades where you want a clean mounting enclosure for under-dash or top-mount installations.
- Custom builds (projects and vehicle-specific installs) where you want to avoid cutting the dash and need a universal enclosure solution.
- DIY installers who prefer step-by-step instructions and do not want special tools to mount the kit.
Who should avoid it
- Double DIN shoppers, since this enclosure is explicitly not for double DIN radios.
- Buyers who cannot measure the available flat-surface area, because fit depends on the enclosure footprint and the head unit cutout.
- Anyone relying on included screws, because mounting screws are not included.
Build quality and installation experience
The UDEB is made from durable hard-plastic materials intended to securely hold the stereo and withstand daily vehicle use. Multiple buyer comments mention the head unit slides in cleanly and the radio cage fits properly, which points to consistent assembly and practical usability.
It also includes features that can help with wiring, such as tabs that can be removed to route wires and RCA connections. Still, real-world installations can require minor adjustments, and some buyers report trimming may be needed depending on the exact location and how you plan to run cables.
Price and availability
This enclosure is positioned as an affordable installation aid for anyone upgrading to a single DIN aftermarket radio. For the most current price and shipping details, check the listing availability.
Alternatives to consider
If you do not meet the single DIN requirements, you will need a different enclosure type. Beyond that, choose an alternative based on your priorities:
- If you need double DIN support: look for a double DIN enclosure designed specifically for that chassis size.
- If you need a near-vehicle-specific appearance: consider a vehicle-specific mounting kit (they typically require less trimming and alignment work, but compatibility is narrower).
- If you want the most flexibility with wiring: compare enclosures that emphasize cable access and clearance behind the head unit, especially if your wiring harness or RCA connections are thicker than average.
Verdict
The Scosche UDEB is a straightforward, universal single DIN enclosure for under-dash or top-mount installs. It is a solid choice when you need a stable, clean-looking housing for a single DIN aftermarket stereo and you have the space for the listed footprint. Just be sure your head unit is truly single DIN, confirm the cutout and enclosure dimensions, and plan for your own mounting screws.
FAQ
- Does the Scosche UDEB fit double DIN radios?No. This enclosure is designed specifically for single DIN head units.
- What radio cutout size does this kit support?It is built around a standard DIN cutout of 50mm x 180mm. Check your head unit’s cutout requirements to confirm compatibility.
- Is it for under-dash mounting, top-mount mounting, or both?It supports both under-dash and top-mount installations, depending on how you position the enclosure on your chosen flat surface.
- What mounting hardware is included?The kit includes mounting components and instructions, but mounting screws are not included. You may need to use screws that match your vehicle surface and thickness.
- Do I need special tools to install it?No special tools are required, and the kit includes step-by-step instructions for installation.
Specifications
| Product Title | Scosche UDEB Universal Under Dash or Top Mount Single DIN Radio Installation Enclosure - Aftermarket Car Stereo Install Kit - Does Not Fit Double DIN Radios - See Images for Enclosure Dimensions |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Vehicle Electronics Accessories > Car Dash Mounting Kits |
| Brand | Scosche |
| Manufacturer | SCOSCHE |
| Model Number | UDEB |
| Color | black |
| Item Weight | 0.65 Pounds |
| Smart Home Compatibility | Not Smart Home Compatible |
| Antenna Location | Radio |
| UPC | 033991006577 |
| Global Trade Identification Number | 00033991006577 |
| Mfr Part Number | UDEB |
| Warranty Description | LIFE-TIME |
| Unit Count | 1.0 Count |
| Recommended Uses For Product | Radio |
| Number of Items | 1 |
Available variants
Product Packaging
- Standard Packaging
Recommended next
Scosche ICCR6BN Double DIN Radio Installation Dash Kit Compatible with select 2007–2019 Chrysler, Dodge, Jeep and RAM vehicles
The Scosche ICCR6BN is a vehicle-specific double DIN dash kit for select 2007–2019 Chrysler, Dodge, Jeep, and RAM models. It’s designed to help you mount an aftermarket head unit in the factory location with a wiring harness and antenna adapter, minimizing the need to cut factory wires. The main tradeoff: it’s not meant to retain steering wheel controls, and some installs may require light trimming or small bezel adjustments for a perfect look.
Scosche ICFD6BN Double DIN Radio Installation Dash Kit Compatible
The Scosche ICFD6BN is a vehicle-specific double DIN dash kit for select 2007-2010 Ford and Mercury models. It aims to help you mount an aftermarket double DIN stereo in the factory radio location with a wiring harness, antenna adapter, and install hardware, keeping the look clean. The main caveat is fitment accuracy, plus steering-wheel control retention is not included.
Scosche GM0516DDCS Double DIN Radio Install Dash Kit Compatible with Select 2004-21 GM Vehicles
The Scosche GM0516DDCS is a vehicle-specific double-DIN dash kit and radio interface designed for select 2004 to 2021 GM vehicles. It aims to make an aftermarket stereo install cleaner by pairing with the factory harness and supporting steering wheel control integration, but the fit can depend on your exact vehicle and your head unit’s true double-DIN dimensions.
Grey Gray Complete Single Din Dash Kit + Pocket Kit + Wire Harness + Antenna Adapter Compatible with Chevrolet & GMC 1988-1996 Select Models
This complete single-DIN dash kit (with pocket kit, color-matched wire harness, and antenna adapter) is made for select 1988-1996 Chevrolet and GMC full-size trucks, SUVs, and related models. It’s designed to reuse factory dash mounting points for an easier install, and buyers frequently mention an OEM-looking finish and a close grey color match. The main tradeoff is that the harness setup still requires basic radio-wire connections (for example, crimping or soldering pigtails).