Scosche ICGM10BN Complete Double/Single DIN Stereo Installation Kit for Select
Quick take
The Scosche ICGM10BN is a vehicle-specific double/single DIN dash and wiring kit for select 2006-17 GM vehicles with non-amplified factory audio. It aims for a factory-like look and includes mounting parts and a harness to connect to the factory wiring. The main caveat is compatibility: some installs may require extra attention to power switching, and some radios marketed as “double DIN” can still need adjustments because of size or harness interface needs.
Pros and cons
Pros
- Designed for select 2006-17 GM vehicles with non-amplified systems, for a tailored dash fit.
- Includes multiple mounting components for single-DIN and true double-DIN setups (with a stated max faceplate opening size).
- Includes hardware, step-by-step instructions, and a direct factory-harness connection approach (no wire cutting described).
- Backed by a limited lifetime warranty and lifetime tech support.
Cons
- Not intended for some configurations, such as vehicles with certain amplified setups, and fitment depends on confirming your exact model.
- Some buyer experiences report it is not fully “plug-and-play” if your head unit or vehicle wiring expects an additional interface or different switched power wiring.
- Some radios that are larger than “true” double-DIN dimensions may require minor kit trimming or alternative mounting parts.
- One experience notes a gap and missing radio screws, so double-check your head unit hardware needs.
What buyers think
Buyer-review evidence is mixed but generally points to strong physical fit when the kit is matched to the correct vehicle and the correct radio form factor. Multiple installs mention the fit as “perfect” or “works as advertised,” which suggests the dash opening and trim alignment are usually on target for the intended GM models. Where experiences diverge is in install details: a recurring theme is that wiring behavior may not be immediately plug-and-play for every setup, including switched power behavior and, in some cases, needing additional components like a data interface to preserve functions such as chimes. There is also limited but relevant feedback about radio fit nuances, such as needing customization for a recommended radio or experiencing an unintended gap with a single-DIN mounting approach.
Who this kit is for
This kit is best for you if you are installing an aftermarket stereo in a select 2006-17 GM vehicle (Buick, Chevrolet, GMC, Hummer, Pontiac, Saturn, and also listed Suzuki applications) that has a non-amplified factory system. It is designed to work with a compatible aftermarket head unit that is truly double DIN (or can be installed as a single DIN using the included pocket) and you want a dash kit that helps you achieve a cleaner, more OEM-like appearance.
Key compatibility and size notes
Double-DIN fit depends on your head unit’s faceplate opening
The kit is intended for true double-DIN stereos with a stated maximum faceplate opening of 96.8mm x 173mm. Many stereos labeled “double DIN” are actually oversize, so you should confirm your specific radio dimensions before assuming it will drop in without modification.
Vehicle match matters (especially amplified vs non-amplified)
The kit is targeted at non-amplified factory systems. If your vehicle uses an amplified factory audio setup, you should verify fitment carefully, because a mismatch can lead to missing expected behavior or additional adapter needs.
What’s in the box and what it means for installation
The kit includes an instruction manual, a radio bezel and mounting brackets, a single DIN pocket, a wiring harness, and an antenna adapter. In practical terms, it means you likely will not have to source every piece of the bezel and mounting framework separately, and you can focus on connecting the harness to your aftermarket stereo and the factory connections. However, some installs report that “power on” behavior can require careful checking of switched power wiring (for example, ensuring the correct lead goes to an ignition-switched source).
Pros and cons of the scosche ICGM10BN
Pros
- Vehicle-specific design: Built for select GM models, which usually helps with alignment and the “factory look” goal.
- Supports both single-DIN and true double-DIN: You get the bezel/mounting parts and a single-DIN pocket option.
- Includes wiring harness and antenna adapter: Helps reduce the number of separate shopping items for a complete install.
- Durable mounting approach: The kit is designed to securely hold the stereo and connect to the factory harness without cutting wires (per the product design intent).
Cons
- May require extra troubleshooting, not always plug-and-play: Some buyers report issues tied to switched power connection behavior.
- May require additional accessories for full functionality: Some experiences mention needing a data interface to get functions like vehicle chimes and proper integration.
- Radio size can be the deciding factor: If your head unit is oversize relative to the kit’s stated double-DIN opening, you may need trimming or a different mounting approach.
- Radio hardware expectations vary: There is at least one report of missing screws to attach the radio to the mount, so confirm what your head unit box includes.
Is the Scosche ICGM10BN worth it?
It’s worth considering if your priority is a correct-looking dash installation for a select 2006-17 GM vehicle with a non-amplified system, and you have a compatible aftermarket radio that meets the kit’s true double-DIN size guidance. If you want a straightforward install with zero wiring verification and your car’s integration is known to require extra interface components, you may want to budget more time for troubleshooting or consider a more comprehensive vehicle integration route (such as an install solution that explicitly covers your vehicle’s chime and accessory expectations).
How it compares for different buyer needs
If you want a clean, matched dash fit
The Scosche ICGM10BN is designed for that goal, and buyer feedback tends to confirm good physical fit when the vehicle and radio are a match.
If you want the easiest “radio powers on” experience
Expect that some setups may need extra attention to switched power behavior, and wiring verification may be required even when connectors appear to match.
If you need full vehicle integration (chimes, data features)
Buyer experiences suggest you may need additional integration hardware depending on your vehicle and radio. If your setup must preserve specific vehicle functions, plan to research the interface requirements for your exact year and system.
Price and availability
The kit is typically positioned as an affordable installation accessory compared with higher-integration solutions, with a current price point shown on the listing. Availability can change, so check the latest price and stock status before you buy.
FAQ
Will this kit work with my car’s factory amplifier?
This kit is designed for select 2006-17 GM vehicles with non-amplified factory systems. If your vehicle has an amplified setup, confirm compatibility before purchasing.
Is it plug-and-play?
Many installs are straightforward, but review evidence indicates some setups may need troubleshooting for switched power behavior. Plan on verifying power, ground, and ignition-switched wiring connections.
What size double-DIN radio does it support?
The kit is intended for true double-DIN stereos with a maximum faceplate opening of 96.8mm x 173mm. Radios marketed as double DIN can still be oversize, so check your head unit’s dimensions.
Does it include everything for installation?
It includes the dash bezel and mounting brackets, a single-DIN pocket, wiring harness, antenna adapter, and an instruction manual. Some buyers report needing to supply or confirm additional items for full radio mounting (such as screws) depending on the head unit.
Do I need extra interface equipment for vehicle chimes or data?
Some buyer experiences point to situations where a separate data interface may be needed for functions like vehicle chimes and broader integration. Whether you need it depends on your vehicle and radio combination.
Specifications
| Product Title | Scosche ICGM10BN Complete Double/Single DIN Stereo Installation Kit for Select Non-Amplified 2006-17 General Motors Vehicles - No Steering Wheel Remote - See Fit Guide in Images to Verify Your Vehicle |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Vehicle Electronics Accessories > Car Dash Mounting Kits |
| Manufacturer | Scosche |
| Color | Black |
| Item Weight | 12 ounces |
| Product Dimensions | 4 x 7.75 x 4.75 inches |
| Item model number | ICGM10BN |
| Connectivity technologies | LAN |
| Other display features | Car Audio or Theater |
| Whats in the box | Instruction Manual, Radio Bezel and Mounting Brackets, Single DIN Pocket, Wiring Harness and Antenna Adapter |
Available variants
Style
- Premium Installation Set
- Class II Complete Kit
- Complete Installation Kit
- Dash Kit Only
Recommended next
Scosche ICCR6BN Double DIN Radio Installation Dash Kit Compatible with select 2007–2019 Chrysler, Dodge, Jeep and RAM vehicles
The Scosche ICCR6BN is a vehicle-specific double DIN dash kit for select 2007–2019 Chrysler, Dodge, Jeep, and RAM models. It’s designed to help you mount an aftermarket head unit in the factory location with a wiring harness and antenna adapter, minimizing the need to cut factory wires. The main tradeoff: it’s not meant to retain steering wheel controls, and some installs may require light trimming or small bezel adjustments for a perfect look.
Scosche ICFD6BN Double DIN Radio Installation Dash Kit Compatible
The Scosche ICFD6BN is a vehicle-specific double DIN dash kit for select 2007-2010 Ford and Mercury models. It aims to help you mount an aftermarket double DIN stereo in the factory radio location with a wiring harness, antenna adapter, and install hardware, keeping the look clean. The main caveat is fitment accuracy, plus steering-wheel control retention is not included.
Scosche UDEB Universal Under Dash or Top Mount Single DIN Radio Installation Enclosure
The Scosche UDEB is a universal single DIN installation enclosure for mounting an aftermarket car stereo in an under-dash or top-mount location, creating a cleaner, more factory-like look. It’s designed around a 50mm x 180mm DIN cutout and a flat-surface footprint (11” wide by 9” deep), but it will not work with double DIN stereos.
Metra Electronics Jeep - 4"x6" Speaker Adapters Fits Jeep Wrangler 1997-2006 (Side Dashboard Location)
Metra Electronics Jeep 4x6 speaker adapters are designed to help install 4x6 speakers in the side dash location of select Jeep Wrangler models (1997-2006). If you are upgrading factory-position speakers, these adapters focus on alignment, “drop-in” convenience, and correct mounting, with the tradeoff that some small trimming to the factory speaker support may be required. Sold as a pair, and a speaker harness is sold separately.